[Wed Aug 15 10:13:59 2012] Detection parameters:
  Position = (380.9, 285.7) = 10 44 10.39 -59 43 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3874.1 +/- 80.4
  Background counts = 18.4
  Rate = 0.6 +/- 0.01

[Wed Aug 15 10:14:00 2012] Off-axis axis estimate = 6.05'
[Wed Aug 15 13:49:35 2012] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 13:49:35 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Wed Aug 15 13:49:35 2012] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.910
[Wed Aug 15 13:49:35 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.45"
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src2.ximg exists
[Wed Aug 15 15:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src2.csv
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Aug 15 15:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src2.csv
[Wed Aug 15 15:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Aug 15 15:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Aug 15 15:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Aug 15 15:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:24:58 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.297253 pixels away
[Wed Aug 15 17:24:58 2012] Source 1 is offset by -0.611174 and -2.142139 pixels which is larger than
2 X fitted extent = 1.062064 x 1.062064, not incorporating fit results
[Wed Aug 15 17:24:58 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 17:24:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 17:24:58 2012] Assessing source extent using major
[Wed Aug 15 17:24:58 2012] Source does appear to be extended
[Wed Aug 15 17:24:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 20:59:38 2012] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 20:59:38 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Wed Aug 15 20:59:38 2012] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.910
[Wed Aug 15 20:59:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.45"
[Wed Aug 15 22:21:02 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src2.ximg exists
[Wed Aug 15 22:21:02 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Aug 15 22:21:02 2012] Fit fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Aug 15 22:21:03 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Aug 15 22:21:03 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Aug 15 22:21:03 2012] Fit fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Aug 15 23:25:18 2012] Spatial fit model total counts = 3653.000000, observed total counts = 3966.000000
[Wed Aug 15 23:25:18 2012] Offset between fit and detection position for source 1 = 0.977723 pixels
[Wed Aug 15 23:25:18 2012] 3646.625000 total counts/ 761.655000 bgd. counts: snr = 104.535103
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.977723 pixels
  Position = (380.7, 286.7) = 10 44 10.50 -59 43 12.3
  Extent = 9.5 (9.1-9.9)" x 7.2 (6.8-7.6)", rotation angle = 310 (304-315) degrees
  Source counts = 2885.0 +/- 60.4
  Background counts = 761.7
  Rate = 0.3 +/- 0.005
[Wed Aug 15 23:25:18 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 23:25:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 23:25:18 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 23:25:18 2012] Source does appear to be extended
[Wed Aug 15 23:25:18 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21
[Thu Aug 16 02:00:25 2012] Counts = 2884.970000, rescaling region sizes by 2.000000
[Thu Aug 16 02:00:25 2012] XMMSAS src. selection expression = ellipse(33070.830400, 24895.033200, 1142.422833, 861.092425, 310.382600, X, Y)
[Thu Aug 16 02:00:25 2012] Writing source region out to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug 16 02:00:25 2012] Extracting stamp from image fullrun_mos1_xmm0112580701_pi300-10000_cl_sm2.00.img.gz, (315, 221) - (446, 352)
[Thu Aug 16 02:00:25 2012] XMMSAS bgd. selection expression = annulus(33070.830400, 24895.033200, 3808.076110, 7616.152219, X, Y) && !ellipse(25054.207600, 27448.791400, 1712.311249, 1712.311249, 0.000000, X, Y) && !ellipse(29626.581400, 23523.607400, 755.561622, 755.561622, 0.000000, X, Y) && !ellipse(25078.466278, 25091.382996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24940.228000, 28049.886000, 1223.232035, 1223.232035, 0.000000, X, Y) && !ellipse(29837.462921, 30315.299164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30474.627472, 22295.496429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28343.843400, 20422.286400, 641.622418, 641.622418, 0.000000, X, Y) && !ellipse(32453.412842, 24247.590790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27534.276720, 24059.078200, 369.357611, 369.357611, 0.000000, X, Y) && !ellipse(28245.780823, 25398.551300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30785.990723, 24459.124939, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 02:00:25 2012] Writing fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src1.gif
[Thu Aug 16 02:07:21 2012] Mean detx,y = (-7918.18, 1745.96) 
[Thu Aug 16 02:07:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 02:08:36 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 02:08:36 2012] Setting source spectrum file to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug 16 02:08:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug 16 03:47:15 2012] Updating aperture counts using extracted products
[Thu Aug 16 03:47:15 2012] Error reading totcts from fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug 16 03:47:15 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 03:47:15 2012] Using photon index=1.80, rate=0.262, arf fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src1.arf
[Thu Aug 16 03:47:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 03:47:16 2012] Updating source flux to 4.5e-12
[Thu Aug 16 03:47:18 2012] Flag b found in src. 1 procflags, skipping spectral fitting