[Mon Jan 23 10:13:31 2012] Detection parameters:
  Position = (297.1, 333.6) = 0 42 50.36 41 17 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.0 +/- 14.4
  Background counts = 62.3
  Rate = 0.01 +/- 0.002

[Mon Jan 23 10:13:31 2012] Off-axis axis estimate = 2.55'
[Mon Jan 23 10:16:28 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:16:28 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Mon Jan 23 10:16:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.582
[Mon Jan 23 10:16:28 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 7.70"
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src85.ximg exists
[Mon Jan 23 15:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src85.csv
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src85_1.ximg exists
[Mon Jan 23 15:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src85.csv
[Mon Jan 23 15:44:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:44:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Mon Jan 23 15:44:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Mon Jan 23 15:44:38 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Mon Jan 23 23:28:54 2012] Source 95 is offset by -2.109761 and 3.834920 pixels which is larger than
2 X fitted extent = 0.844267 x 0.844267, not incorporating fit results
[Mon Jan 23 23:28:55 2012] Source 95 is offset by 7.219963 and 5.857885 pixels which is larger than
2 X fitted extent = 2.329848 x 2.329848, not incorporating fit results
[Mon Jan 23 23:28:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:28:55 2012] Assessing source extent using major
[Mon Jan 23 23:28:55 2012] Source does appear to be extended
[Mon Jan 23 23:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:28:55 2012] Source is confused with source 91
[Mon Jan 23 23:29:54 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 23:29:54 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Mon Jan 23 23:29:54 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.582
[Mon Jan 23 23:29:54 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 7.70"
[Tue Jan 24 04:14:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src75.ximg exists
[Tue Jan 24 04:14:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src75_1.ximg exists
[Tue Jan 24 04:14:37 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src75 appears to have run properly
[Tue Jan 24 04:14:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Tue Jan 24 04:14:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Tue Jan 24 04:14:38 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Tue Jan 24 13:18:13 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 95 at 13.075419 pixels away
[Tue Jan 24 13:18:13 2012] Source 95 is offset by -2.109761 and 3.834920 pixels which is larger than
2 X fitted extent = 0.844267 x 0.844267, not incorporating fit results
[Tue Jan 24 13:18:14 2012] Spatial fit model total counts = 1379.580000, observed total counts = 1382.000000
[Tue Jan 24 13:18:14 2012] Offset between fit and detection position for source 95 = 2.748636 pixels
[Tue Jan 24 13:18:14 2012] Warning, changing simple spatial fit ID from 75 to 74
[Tue Jan 24 13:18:14 2012] 1407.095000 total counts/ 1226.210000 bgd. counts: snr = 5.165592
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 2.748636 pixels
  Position = (297.2, 336.3) = 0 42 50.35 41 17 21.8
  Extent = 15.5 (14.5-31.0)" x 5.6 (4.2-7.2)", rotation angle = 104 (98-109) degrees
  Source counts = 180.9 +/- 37.5
  Background counts = 1226.2
  Rate = 0.02 +/- 0.004
[Tue Jan 24 13:18:14 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:14 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:14 2012] Source does appear to be extended
[Tue Jan 24 13:18:14 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.02
[Tue Jan 24 13:18:14 2012] Source is asymmetric
[Tue Jan 24 13:19:31 2012] XMMSAS src. selection expression = ellipse(25804.886000, 29212.867800, 930.594027, 338.792410, 103.701000, X, Y)
[Tue Jan 24 13:19:31 2012] Writing source region out to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src95_src.reg
[Tue Jan 24 13:19:31 2012] Extracting stamp from image fullrun_pn_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (244, 283) - (351, 390)
[Tue Jan 24 13:19:31 2012] XMMSAS bgd. selection expression = annulus(25804.886000, 29212.867800, 1550.990045, 3101.980089, X, Y) && !ellipse(28485.851538, 27647.765600, 1240.852836, 1240.852836, 0.000000, X, Y) && !ellipse(27233.698000, 27880.780600, 1196.104034, 1196.104034, 0.000000, X, Y) && !ellipse(24801.143200, 27654.778400, 365.276011, 365.276011, 0.000000, X, Y) && !ellipse(25354.113244, 27180.411600, 351.760010, 351.760010, 0.000000, X, Y) && !ellipse(26284.126600, 26854.437800, 663.114419, 429.916012, 121.510563, X, Y) && !ellipse(26565.494000, 28119.000600, 395.395211, 395.395211, 0.000000, X, Y) && !ellipse(27549.284000, 27624.162000, 1179.472034, 1179.472034, 0.000000, X, Y) && !ellipse(23684.676788, 27669.344757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22974.686000, 26864.486000, 467.568813, 467.568813, 0.000000, X, Y) && !ellipse(23743.497400, 31573.064400, 425.412012, 425.412012, 0.000000, X, Y) && !ellipse(22800.727400, 30079.696400, 436.140813, 436.140813, 0.000000, X, Y) && !ellipse(27644.817000, 26108.732800, 375.199211, 351.434410, 107.648700, X, Y) && !ellipse(29314.000000, 32462.296570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24392.199615, 30831.882904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.528320, 30297.186554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28356.997345, 29412.814880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27066.028000, 29577.242200, 411.636812, 411.636812, 0.000000, X, Y) && !ellipse(26713.754000, 28733.126000, 1240.792036, 652.248819, 29.525000, X, Y) && !ellipse(29549.142670, 28108.706970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24056.895966, 26941.656982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21974.361343, 32764.863708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28158.556800, 30875.459600, 563.637616, 563.637616, 0.000000, X, Y) && !ellipse(25866.213470, 29531.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29040.739200, 29719.178000, 1331.472038, 1331.472038, 0.000000, X, Y) && !ellipse(26239.032000, 29273.806000, 1893.040054, 1240.112036, 358.683000, X, Y) && !ellipse(22242.174000, 28170.872000, 1267.104036, 1267.104036, 0.000000, X, Y) && !ellipse(29082.186737, 26309.077667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.438000, 25137.530000, 1056.928030, 1056.928030, 0.000000, X, Y)
[Tue Jan 24 13:19:31 2012] Writing fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src95.gif
[Tue Jan 24 15:03:15 2012] Mean detx,y = (-1785.43, -1596.64) 
[Tue Jan 24 15:03:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 15:04:03 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 15:04:03 2012] Setting source spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Tue Jan 24 15:04:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Wed Jan 25 01:27:29 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:29 2012] Error reading totcts from fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Wed Jan 25 01:27:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:30 2012] Using photon index=1.80, rate=0.0184, arf fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src95.arf
[Wed Jan 25 01:27:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:30 2012] Updating source flux to 8.9e-14
[Wed Jan 25 01:33:50 2012] Flag b found in src. 95 procflags, skipping spectral fitting
[Wed Jan 25 01:33:50 2012] Flag c found in src. 95 procflags, skipping spectral fitting