[Mon Jan 23 10:13:30 2012] Detection parameters:
  Position = (334.8, 335.9) = 0 42 35.83 41 17 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.9 +/- 15.8
  Background counts = 54.8
  Rate = 0.008 +/- 0.002

[Mon Jan 23 10:13:31 2012] Off-axis axis estimate = 3.79'
[Mon Jan 23 10:16:28 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:16:28 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Mon Jan 23 10:16:28 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.859
[Mon Jan 23 10:16:28 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 8.32"
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src83.ximg exists
[Mon Jan 23 15:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src83.csv
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src83_1.ximg exists
[Mon Jan 23 15:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src83.csv
[Mon Jan 23 15:44:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:44:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Mon Jan 23 15:44:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Mon Jan 23 15:44:38 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Mon Jan 23 23:28:55 2012] Spatial fit model total counts = 1030.580000, observed total counts = 1035.000000
[Mon Jan 23 23:28:55 2012] Offset between fit and detection position for source 93 = 6.238547 pixels
[Mon Jan 23 23:28:55 2012] 965.700000 total counts/ 651.390000 bgd. counts: snr = 12.315092
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 6.238547 pixels
  Position = (334.4, 342.2) = 0 42 35.99 41 17 47.0
  Extent = 16.6 (16.6-33.3)", rotation angle = 0
  Source counts = 314.3 +/- 31.1
  Background counts = 651.4
  Rate = 0.03 +/- 0.003
[Mon Jan 23 23:28:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:28:55 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:28:55 2012] Source does appear to be extended
[Mon Jan 23 23:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:28:55 2012] Source is confused with source 54
[Mon Jan 23 23:29:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 23:29:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 23 23:29:54 2012] Initial guess for spatial extent in simple fitting = 16.64"
[Mon Jan 23 23:29:54 2012] source mask rpix=3.8, npix_max = 74, mask sum = 64, frac = 0.855
[Mon Jan 23 23:29:54 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 16.64"
[Tue Jan 24 04:14:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src73.ximg exists
[Tue Jan 24 04:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src73.csv
[Tue Jan 24 04:14:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src73_1.ximg exists
[Tue Jan 24 04:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src73.csv
[Tue Jan 24 04:14:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 04:14:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Tue Jan 24 04:14:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Tue Jan 24 04:14:38 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Tue Jan 24 13:18:14 2012] Warning, spatial fit 73 centroid is now closest to src. 59
[Tue Jan 24 13:18:14 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:14 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:14 2012] Source does appear to be extended
[Tue Jan 24 13:18:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 13:19:30 2012] XMMSAS src. selection expression = ellipse(29040.739200, 29719.178000, 998.604029, 998.604029, 0.000000, X, Y)
[Tue Jan 24 13:19:30 2012] Writing source region out to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src93_src.reg
[Tue Jan 24 13:19:30 2012] Extracting stamp from image fullrun_pn_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (277, 285) - (392, 400)
[Tue Jan 24 13:19:30 2012] XMMSAS bgd. selection expression = annulus(29040.739200, 29719.178000, 1664.340048, 3328.680096, X, Y) && !ellipse(28485.851538, 27647.765600, 1240.852836, 1240.852836, 0.000000, X, Y) && !ellipse(27233.698000, 27880.780600, 1196.104034, 1196.104034, 0.000000, X, Y) && !ellipse(26284.126600, 26854.437800, 663.114419, 429.916012, 121.510563, X, Y) && !ellipse(26565.494000, 28119.000600, 395.395211, 395.395211, 0.000000, X, Y) && !ellipse(27549.284000, 27624.162000, 1179.472034, 1179.472034, 0.000000, X, Y) && !ellipse(30167.873600, 28012.016400, 485.525614, 485.525614, 0.000000, X, Y) && !ellipse(32342.555000, 27610.717000, 409.383212, 409.383212, 0.000000, X, Y) && !ellipse(31985.946400, 26963.368200, 314.135209, 314.135209, 0.000000, X, Y) && !ellipse(30153.971619, 31965.784851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27644.817000, 26108.732800, 375.199211, 351.434410, 107.648700, X, Y) && !ellipse(29314.000000, 32462.296570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31326.013062, 31534.000092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.528320, 30297.186554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28356.997345, 29412.814880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27066.028000, 29577.242200, 411.636812, 411.636812, 0.000000, X, Y) && !ellipse(26713.754000, 28733.126000, 1240.792036, 652.248819, 29.525000, X, Y) && !ellipse(29549.142670, 28108.706970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32288.123993, 25536.649994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27834.654846, 33709.767395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28158.556800, 30875.459600, 563.637616, 563.637616, 0.000000, X, Y) && !ellipse(25866.213470, 29531.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26239.032000, 29273.806000, 1893.040054, 1240.112036, 358.683000, X, Y) && !ellipse(25804.886000, 29212.867800, 1240.792036, 451.723213, 103.701000, X, Y) && !ellipse(29082.186737, 26309.077667, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 13:19:30 2012] Writing fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src93.gif
[Tue Jan 24 14:45:00 2012] Mean detx,y = (1154.01, -2738.28) 
[Tue Jan 24 14:45:04 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 14:46:03 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 14:46:03 2012] Setting source spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Tue Jan 24 14:46:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Wed Jan 25 01:27:29 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:29 2012] Error reading totcts from fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Wed Jan 25 01:27:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:30 2012] Using photon index=1.80, rate=0.0319, arf fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src93.arf
[Wed Jan 25 01:27:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:30 2012] Updating source flux to 8.8e-14
[Wed Jan 25 01:33:50 2012] Flag c found in src. 93 procflags, skipping spectral fitting