[Mon Jan 23 10:13:30 2012] Detection parameters:
  Position = (323.9, 355.6) = 0 42 40.02 41 18 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.6 +/- 14.8
  Background counts = 41.0
  Rate = 0.01 +/- 0.002

[Mon Jan 23 10:13:31 2012] Off-axis axis estimate = 4.54'
[Mon Jan 23 10:16:28 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:16:28 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Mon Jan 23 10:16:28 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.000
[Mon Jan 23 10:16:28 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 8.70"
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src79.ximg exists
[Mon Jan 23 15:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src79.csv
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src79_1.ximg exists
[Mon Jan 23 15:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src79.csv
[Mon Jan 23 15:44:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:44:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Mon Jan 23 15:44:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Mon Jan 23 15:44:38 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Mon Jan 23 23:28:55 2012] Spatial fit model total counts = 590.999000, observed total counts = 591.000000
[Mon Jan 23 23:28:55 2012] Offset between fit and detection position for source 88 = 0.217867 pixels
[Mon Jan 23 23:28:55 2012] 579.167500 total counts/ 511.680000 bgd. counts: snr = 2.983487
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 0.217867 pixels
  Position = (324.0, 355.4) = 0 42 39.99 41 18 44.8
  Extent = 6.0 (3.4-8.0)", rotation angle = 0
  Source counts = 67.5 +/- 24.1
  Background counts = 511.7
  Rate = 0.007 +/- 0.002
[Mon Jan 23 23:28:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:28:55 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:28:55 2012] Source does appear to be extended
[Mon Jan 23 23:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:29:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 23:29:54 2012] Initial guess for spatial extent in simple fitting = 5.97"
[Mon Jan 23 23:29:54 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.856
[Mon Jan 23 23:29:54 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 5.97"
[Tue Jan 24 04:14:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src71.ximg exists
[Tue Jan 24 04:14:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src71.csv
[Tue Jan 24 04:14:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src71_1.ximg exists
[Tue Jan 24 04:14:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src71.csv
[Tue Jan 24 04:14:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 04:14:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Tue Jan 24 04:14:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Tue Jan 24 04:14:38 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Tue Jan 24 13:18:14 2012] Spatial fit model total counts = 561.001000, observed total counts = 561.000000
[Tue Jan 24 13:18:14 2012] Offset between fit and detection position for source 88 = 0.208513 pixels
[Tue Jan 24 13:18:14 2012] 521.547000 total counts/ 436.924000 bgd. counts: snr = 4.048419
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 0.208513 pixels
  Position = (324.2, 355.4) = 0 42 39.91 41 18 44.9
  Extent = 7.0 (4.7-10.5)", rotation angle = 0
  Source counts = 84.6 +/- 22.8
  Background counts = 436.9
  Rate = 0.009 +/- 0.002
[Tue Jan 24 13:18:14 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:14 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:14 2012] Source does appear to be extended
[Tue Jan 24 13:18:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 13:19:30 2012] XMMSAS src. selection expression = ellipse(28158.556800, 30875.459600, 422.728212, 422.728212, 0.000000, X, Y)
[Tue Jan 24 13:19:30 2012] Writing source region out to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src88_src.reg
[Tue Jan 24 13:19:30 2012] Extracting stamp from image fullrun_pn_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (300, 331) - (349, 380)
[Tue Jan 24 13:19:30 2012] XMMSAS bgd. selection expression = annulus(28158.556800, 30875.459600, 704.547020, 1409.094041, X, Y) && !ellipse(30153.971619, 31965.784851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29314.000000, 32462.296570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.528320, 30297.186554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28356.997345, 29412.814880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27066.028000, 29577.242200, 411.636812, 411.636812, 0.000000, X, Y) && !ellipse(26713.754000, 28733.126000, 1240.792036, 652.248819, 29.525000, X, Y) && !ellipse(29040.739200, 29719.178000, 1331.472038, 1331.472038, 0.000000, X, Y) && !ellipse(26239.032000, 29273.806000, 1893.040054, 1240.112036, 358.683000, X, Y) && !ellipse(25804.886000, 29212.867800, 1240.792036, 451.723213, 103.701000, X, Y)
[Tue Jan 24 13:19:30 2012] Writing fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src88.gif
[Tue Jan 24 14:43:02 2012] Mean detx,y = (7.83, -3838.13) 
[Tue Jan 24 14:43:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 14:43:18 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 14:43:19 2012] Setting source spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Tue Jan 24 14:43:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Tue Jan 24 20:07:05 2012] Not generating rmf since there are only 84 counts
[Tue Jan 24 20:07:05 2012] rmf not generated due to insufficient counts
[Wed Jan 25 01:27:29 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:29 2012] Error reading totcts from fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Wed Jan 25 01:27:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:30 2012] Using photon index=1.80, rate=0.0086, arf fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src88.arf
[Wed Jan 25 01:27:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:30 2012] Updating source flux to 3e-14
[Wed Jan 25 01:33:50 2012] Source 88 has fewer than 100.000000 counts, skipping spectral fitting