[Mon Jan 23 10:13:29 2012] Detection parameters:
  Position = (306.2, 322.5) = 0 42 46.88 41 16 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4340.6 +/- 77.3
  Background counts = 68.6
  Rate = 0.6 +/- 0.01

[Mon Jan 23 10:13:31 2012] Off-axis axis estimate = 1.83'
[Mon Jan 23 10:16:28 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:16:28 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Mon Jan 23 10:16:28 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Mon Jan 23 10:16:28 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.35"
[Mon Jan 23 15:44:35 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src8.ximg exists
[Mon Jan 23 15:44:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src8.csv
[Mon Jan 23 15:44:35 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Jan 23 15:44:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src8.csv
[Mon Jan 23 15:44:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Jan 23 15:44:36 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Jan 23 23:28:54 2012] Warning, spatial fit 8 centroid is now closest to src. 95
[Mon Jan 23 23:28:55 2012] Source 8 is offset by 0.186638 and -1.949101 pixels which is larger than
2 X fitted extent = 2.161735 x 1.262845, not incorporating fit results
[Mon Jan 23 23:28:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:28:55 2012] Assessing source extent using major
[Mon Jan 23 23:28:55 2012] Source does appear to be extended
[Mon Jan 23 23:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:28:55 2012] Source is confused with source 2
[Mon Jan 23 23:29:54 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 23:29:54 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Mon Jan 23 23:29:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Mon Jan 23 23:29:54 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.35"
[Tue Jan 24 04:14:35 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src8.ximg exists
[Tue Jan 24 04:14:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src8.csv
[Tue Jan 24 04:14:35 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Jan 24 04:14:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src8.csv
[Tue Jan 24 04:14:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 04:14:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Jan 24 04:14:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Jan 24 04:14:37 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Jan 24 13:18:13 2012] Spatial fit model total counts = 14878.700000, observed total counts = 14888.000000
[Tue Jan 24 13:18:13 2012] Offset between fit and detection position for source 8 = 1.275782 pixels
[Tue Jan 24 13:18:13 2012] Warning, changing simple spatial fit ID from 8 to 2
[Tue Jan 24 13:18:13 2012] 13977.200000 total counts/ 11883.300000 bgd. counts: snr = 19.208233
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.275782 pixels
  Position = (305.9, 323.8) = 0 42 46.98 41 16 27.1
  Extent = 4.9 (4.7-5.1)", rotation angle = 0
  Source counts = 2093.9 +/- 118.2
  Background counts = 11883.3
  Rate = 0.2 +/- 0.01
[Tue Jan 24 13:18:14 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:14 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:14 2012] Source does appear to be extended
[Tue Jan 24 13:18:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 13:19:26 2012] Counts = 2093.900000, rescaling region sizes by 2.000000
[Tue Jan 24 13:19:26 2012] XMMSAS src. selection expression = ellipse(26565.494000, 28119.000600, 593.092817, 593.092817, 0.000000, X, Y)
[Tue Jan 24 13:19:26 2012] Writing source region out to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src8_src.reg
[Tue Jan 24 13:19:26 2012] Extracting stamp from image fullrun_pn_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (272, 290) - (340, 358)
[Tue Jan 24 13:19:27 2012] XMMSAS bgd. selection expression = annulus(26565.494000, 28119.000600, 1976.976057, 3953.952114, X, Y) && !ellipse(28485.851538, 27647.765600, 1240.852836, 1240.852836, 0.000000, X, Y) && !ellipse(27233.698000, 27880.780600, 1196.104034, 1196.104034, 0.000000, X, Y) && !ellipse(24801.143200, 27654.778400, 365.276011, 365.276011, 0.000000, X, Y) && !ellipse(25354.113244, 27180.411600, 351.760010, 351.760010, 0.000000, X, Y) && !ellipse(26284.126600, 26854.437800, 663.114419, 429.916012, 121.510563, X, Y) && !ellipse(27549.284000, 27624.162000, 1179.472034, 1179.472034, 0.000000, X, Y) && !ellipse(30167.873600, 28012.016400, 485.525614, 485.525614, 0.000000, X, Y) && !ellipse(23684.676788, 27669.344757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22974.686000, 26864.486000, 467.568813, 467.568813, 0.000000, X, Y) && !ellipse(23743.497400, 31573.064400, 425.412012, 425.412012, 0.000000, X, Y) && !ellipse(22800.727400, 30079.696400, 436.140813, 436.140813, 0.000000, X, Y) && !ellipse(30153.971619, 31965.784851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27644.817000, 26108.732800, 375.199211, 351.434410, 107.648700, X, Y) && !ellipse(29314.000000, 32462.296570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31326.013062, 31534.000092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24392.199615, 30831.882904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.528320, 30297.186554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28356.997345, 29412.814880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27066.028000, 29577.242200, 411.636812, 411.636812, 0.000000, X, Y) && !ellipse(26713.754000, 28733.126000, 1240.792036, 652.248819, 29.525000, X, Y) && !ellipse(29549.142670, 28108.706970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24056.895966, 26941.656982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27025.963580, 25322.910400, 343.182410, 343.182410, 0.000000, X, Y) && !ellipse(28932.838960, 24979.312600, 385.949611, 385.949611, 0.000000, X, Y) && !ellipse(28015.966797, 24558.808014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29911.162000, 24182.174000, 1303.776038, 1303.776038, 0.000000, X, Y) && !ellipse(27432.678900, 24372.411000, 358.728810, 313.216009, 11.109977, X, Y) && !ellipse(21974.361343, 32764.863708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28158.556800, 30875.459600, 563.637616, 563.637616, 0.000000, X, Y) && !ellipse(25866.213470, 29531.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29040.739200, 29719.178000, 1331.472038, 1331.472038, 0.000000, X, Y) && !ellipse(26239.032000, 29273.806000, 1893.040054, 1240.112036, 358.683000, X, Y) && !ellipse(25804.886000, 29212.867800, 1240.792036, 451.723213, 103.701000, X, Y) && !ellipse(22242.174000, 28170.872000, 1267.104036, 1267.104036, 0.000000, X, Y) && !ellipse(29082.186737, 26309.077667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.438000, 25137.530000, 1056.928030, 1056.928030, 0.000000, X, Y) && !ellipse(23422.731598, 25078.848602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23790.097382, 23578.966797, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 13:19:27 2012] Writing fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src8.gif
[Tue Jan 24 13:39:53 2012] Mean detx,y = (-816.34, -739.13) 
[Tue Jan 24 13:39:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 13:40:53 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 13:40:54 2012] Setting source spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jan 24 13:40:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jan 25 01:27:28 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:28 2012] Error reading totcts from fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jan 25 01:27:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:29 2012] Using photon index=1.80, rate=0.213, arf fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src8.arf
[Wed Jan 25 01:27:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:30 2012] Updating source flux to 6.4e-13
[Wed Jan 25 01:33:50 2012] Flag b found in src. 8 procflags, skipping spectral fitting
[Wed Jan 25 01:33:50 2012] Flag c found in src. 8 procflags, skipping spectral fitting