[Mon Jan 23 10:13:30 2012] Detection parameters:
  Position = (340.2, 323.6) = 0 42 33.74 41 16 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 302.9 +/- 25.4
  Background counts = 59.3
  Rate = 0.04 +/- 0.004

[Mon Jan 23 10:13:31 2012] Off-axis axis estimate = 3.54'
[Mon Jan 23 10:16:28 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:16:28 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Mon Jan 23 10:16:28 2012] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.836
[Mon Jan 23 10:16:28 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 8.20"
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src55.ximg exists
[Mon Jan 23 15:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src55.csv
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon Jan 23 15:44:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src55.csv
[Mon Jan 23 15:44:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:44:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon Jan 23 15:44:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Jan 23 15:44:37 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Mon Jan 23 23:28:55 2012] Source 60 is offset by 7.740261 and 6.000379 pixels which is larger than
2 X fitted extent = 2.072340 x 2.072340, not incorporating fit results
[Mon Jan 23 23:28:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:28:55 2012] Assessing source extent using major
[Mon Jan 23 23:28:55 2012] Source does appear to be extended
[Mon Jan 23 23:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:28:55 2012] Source is confused with source 11
[Mon Jan 23 23:29:54 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 23:29:54 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Mon Jan 23 23:29:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.836
[Mon Jan 23 23:29:54 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 8.20"
[Tue Jan 24 04:14:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src50.ximg exists
[Tue Jan 24 04:14:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src50_1.ximg exists
[Tue Jan 24 04:14:36 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src50 appears to have run properly
[Tue Jan 24 04:14:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Tue Jan 24 04:14:38 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Tue Jan 24 04:14:38 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Tue Jan 24 13:18:13 2012] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 13.276918 pixels away
[Tue Jan 24 13:18:13 2012] Source 60 is offset by -7.334682 and 1.285263 pixels which is larger than
2 X fitted extent = 3.005534 x 2.266326, not incorporating fit results
[Tue Jan 24 13:18:14 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:14 2012] Assessing source extent using major
[Tue Jan 24 13:18:14 2012] Source does appear to be extended
[Tue Jan 24 13:18:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 13:19:29 2012] XMMSAS src. selection expression = ellipse(29549.142670, 28108.706970, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 24 13:19:29 2012] Writing source region out to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src60_src.reg
[Tue Jan 24 13:19:29 2012] Extracting stamp from image fullrun_pn_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (303, 286) - (378, 361)
[Tue Jan 24 13:19:29 2012] XMMSAS bgd. selection expression = annulus(29549.142670, 28108.706970, 1087.500000, 2175.000000, X, Y) && !ellipse(28485.851538, 27647.765600, 1240.852836, 1240.852836, 0.000000, X, Y) && !ellipse(27233.698000, 27880.780600, 1196.104034, 1196.104034, 0.000000, X, Y) && !ellipse(27549.284000, 27624.162000, 1179.472034, 1179.472034, 0.000000, X, Y) && !ellipse(30167.873600, 28012.016400, 485.525614, 485.525614, 0.000000, X, Y) && !ellipse(31985.946400, 26963.368200, 314.135209, 314.135209, 0.000000, X, Y) && !ellipse(27644.817000, 26108.732800, 375.199211, 351.434410, 107.648700, X, Y) && !ellipse(28356.997345, 29412.814880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27066.028000, 29577.242200, 411.636812, 411.636812, 0.000000, X, Y) && !ellipse(26713.754000, 28733.126000, 1240.792036, 652.248819, 29.525000, X, Y) && !ellipse(32288.123993, 25536.649994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29040.739200, 29719.178000, 1331.472038, 1331.472038, 0.000000, X, Y) && !ellipse(26239.032000, 29273.806000, 1893.040054, 1240.112036, 358.683000, X, Y) && !ellipse(29082.186737, 26309.077667, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 13:19:29 2012] Writing fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src60.gif
[Tue Jan 24 14:24:45 2012] Mean detx,y = (2209.15, -1492.24) 
[Tue Jan 24 14:24:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 14:25:39 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 14:25:39 2012] Setting source spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Tue Jan 24 14:25:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Tue Jan 24 19:40:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 24 19:40:54 2012] rmf not generated due to insufficient counts
[Wed Jan 25 01:27:29 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:29 2012] Error reading totcts from fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed Jan 25 01:27:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:30 2012] Using photon index=1.80, rate=0.0435, arf fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src60.arf
[Wed Jan 25 01:27:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:30 2012] Updating source flux to 1.2e-13
[Wed Jan 25 01:33:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting