[Mon Jan 23 10:13:29 2012] Detection parameters:
  Position = (347.4, 322.6) = 0 42 30.98 41 16 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2209.6 +/- 55.3
  Background counts = 55.7
  Rate = 0.3 +/- 0.007

[Mon Jan 23 10:13:31 2012] Off-axis axis estimate = 3.95'
[Mon Jan 23 10:16:28 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:16:28 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Mon Jan 23 10:16:28 2012] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.930
[Mon Jan 23 10:16:28 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.41"
[Mon Jan 23 15:44:35 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jan 23 15:44:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src11.csv
[Mon Jan 23 15:44:35 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jan 23 15:44:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src11.csv
[Mon Jan 23 15:44:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jan 23 15:44:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jan 23 15:44:36 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Jan 23 23:28:54 2012] Spatial fit model total counts = 2804.450000, observed total counts = 2809.000000
[Mon Jan 23 23:28:54 2012] Offset between fit and detection position for source 11 = 0.053767 pixels
[Mon Jan 23 23:28:54 2012] 2602.588000 total counts/ 837.418000 bgd. counts: snr = 60.997971
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.053767 pixels
  Position = (347.3, 322.5) = 0 42 31.00 41 16 21.6
  Extent = 6.0 (5.8-6.2)", rotation angle = 0
  Source counts = 1765.2 +/- 51.0
  Background counts = 837.4
  Rate = 0.2 +/- 0.005
[Mon Jan 23 23:28:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:28:55 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:28:55 2012] Source does appear to be extended
[Mon Jan 23 23:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:28:55 2012] Source is confused with source 60
[Mon Jan 23 23:29:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 23:29:54 2012] Initial guess for spatial extent in simple fitting = 6.01"
[Mon Jan 23 23:29:54 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.848
[Mon Jan 23 23:29:54 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.01"
[Tue Jan 24 04:14:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jan 24 04:14:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src11.csv
[Tue Jan 24 04:14:36 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jan 24 04:14:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src11.csv
[Tue Jan 24 04:14:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 04:14:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jan 24 04:14:37 2012] fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jan 24 04:14:37 2012] Fit fullrun_pn_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jan 24 13:18:13 2012] Spatial fit model total counts = 2795.150000, observed total counts = 2809.000000
[Tue Jan 24 13:18:13 2012] Offset between fit and detection position for source 11 = 0.006008 pixels
[Tue Jan 24 13:18:13 2012] 2569.704000 total counts/ 808.004000 bgd. counts: snr = 61.976236
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.006008 pixels
  Position = (347.3, 322.5) = 0 42 31.00 41 16 21.6
  Extent = 6.1 (5.8-6.2)", rotation angle = 0
  Source counts = 1761.7 +/- 50.7
  Background counts = 808.0
  Rate = 0.2 +/- 0.005
[Tue Jan 24 13:18:14 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:14 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:14 2012] Source does appear to be extended
[Tue Jan 24 13:18:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 13:19:27 2012] Counts = 1761.700000, rescaling region sizes by 2.000000
[Tue Jan 24 13:19:27 2012] XMMSAS src. selection expression = ellipse(30167.873600, 28012.016400, 728.288421, 728.288421, 0.000000, X, Y)
[Tue Jan 24 13:19:27 2012] Writing source region out to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src11_src.reg
[Tue Jan 24 13:19:27 2012] Extracting stamp from image fullrun_pn_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (305, 281) - (389, 364)
[Tue Jan 24 13:19:27 2012] XMMSAS bgd. selection expression = annulus(30167.873600, 28012.016400, 2427.628070, 4855.256140, X, Y) && !ellipse(28485.851538, 27647.765600, 1240.852836, 1240.852836, 0.000000, X, Y) && !ellipse(27233.698000, 27880.780600, 1196.104034, 1196.104034, 0.000000, X, Y) && !ellipse(25354.113244, 27180.411600, 351.760010, 351.760010, 0.000000, X, Y) && !ellipse(26284.126600, 26854.437800, 663.114419, 429.916012, 121.510563, X, Y) && !ellipse(26565.494000, 28119.000600, 395.395211, 395.395211, 0.000000, X, Y) && !ellipse(27549.284000, 27624.162000, 1179.472034, 1179.472034, 0.000000, X, Y) && !ellipse(30813.137200, 23248.629380, 480.741614, 480.741614, 0.000000, X, Y) && !ellipse(32932.048000, 25221.076000, 525.591215, 339.580010, 90.000000, X, Y) && !ellipse(33066.850000, 23276.016000, 308.647209, 308.647209, 0.000000, X, Y) && !ellipse(34216.895180, 30722.861600, 433.716812, 433.716812, 0.000000, X, Y) && !ellipse(32342.555000, 27610.717000, 409.383212, 409.383212, 0.000000, X, Y) && !ellipse(31985.946400, 26963.368200, 314.135209, 314.135209, 0.000000, X, Y) && !ellipse(33791.401320, 23485.780000, 395.432811, 395.432811, 0.000000, X, Y) && !ellipse(30153.971619, 31965.784851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34448.868400, 29951.280780, 391.964811, 341.752010, 76.560000, X, Y) && !ellipse(27644.817000, 26108.732800, 375.199211, 351.434410, 107.648700, X, Y) && !ellipse(32162.506000, 24666.330000, 423.792012, 423.792012, 0.000000, X, Y) && !ellipse(29314.000000, 32462.296570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31326.013062, 31534.000092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26109.528320, 30297.186554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28356.997345, 29412.814880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35058.015167, 29706.923096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27066.028000, 29577.242200, 411.636812, 411.636812, 0.000000, X, Y) && !ellipse(33647.163800, 29181.873000, 385.070411, 385.070411, 0.000000, X, Y) && !ellipse(26713.754000, 28733.126000, 1240.792036, 652.248819, 29.525000, X, Y) && !ellipse(29549.142670, 28108.706970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32288.123993, 25536.649994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27025.963580, 25322.910400, 343.182410, 343.182410, 0.000000, X, Y) && !ellipse(28932.838960, 24979.312600, 385.949611, 385.949611, 0.000000, X, Y) && !ellipse(31543.494476, 24835.955902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.966797, 24558.808014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35884.942627, 24577.536591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29911.162000, 24182.174000, 1303.776038, 1303.776038, 0.000000, X, Y) && !ellipse(27432.678900, 24372.411000, 358.728810, 313.216009, 11.109977, X, Y) && !ellipse(27109.676800, 22455.404000, 804.584023, 804.584023, 0.000000, X, Y) && !ellipse(27834.654846, 33709.767395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28158.556800, 30875.459600, 563.637616, 563.637616, 0.000000, X, Y) && !ellipse(33796.746155, 30042.948914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25866.213470, 29531.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29040.739200, 29719.178000, 1331.472038, 1331.472038, 0.000000, X, Y) && !ellipse(26239.032000, 29273.806000, 1893.040054, 1240.112036, 358.683000, X, Y) && !ellipse(25804.886000, 29212.867800, 1240.792036, 451.723213, 103.701000, X, Y) && !ellipse(29082.186737, 26309.077667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.438000, 25137.530000, 1056.928030, 1056.928030, 0.000000, X, Y) && !ellipse(34695.632874, 23768.581024, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 13:19:27 2012] Writing fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src11.gif
[Tue Jan 24 13:49:25 2012] Mean detx,y = (2535.60, -1527.27) 
[Tue Jan 24 13:49:30 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 13:50:15 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 13:50:15 2012] Setting source spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jan 24 13:50:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Jan 25 01:27:28 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:28 2012] Error reading totcts from fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jan 25 01:27:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:30 2012] Using photon index=1.80, rate=0.179, arf fullrun_pn_xmm0112570601_pi300-10000_pass1_cl_src11.arf
[Wed Jan 25 01:27:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:30 2012] Updating source flux to 4.9e-13
[Wed Jan 25 01:33:50 2012] Flag c found in src. 11 procflags, skipping spectral fitting