[Mon Jan 23 10:14:59 2012] Detection parameters:
  Position = (336.2, 325.7) = 0 42 35.30 41 16 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.3 +/- 13.0
  Background counts = 22.5
  Rate = 0.005 +/- 0.001

[Mon Jan 23 10:14:59 2012] Off-axis axis estimate = 3.38'
[Mon Jan 23 19:41:45 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:41:45 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Mon Jan 23 19:41:45 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.117
[Mon Jan 23 19:41:45 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 8.12"
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src70.ximg exists
[Mon Jan 23 23:28:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src70.csv
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src70_1.ximg exists
[Mon Jan 23 23:28:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src70.csv
[Mon Jan 23 23:28:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:28:34 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Mon Jan 23 23:28:34 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Mon Jan 23 23:28:34 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Mon Jan 23 23:29:31 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 11.704274 pixels away
[Mon Jan 23 23:29:31 2012] Source 78 is offset by 3.664292 and 6.603786 pixels which is larger than
2 X fitted extent = 4.416933 x 4.416933, not incorporating fit results
[Mon Jan 23 23:29:32 2012] Source 78 is offset by 7.077764 and 0.766751 pixels which is larger than
2 X fitted extent = 2.534294 x 2.534294, not incorporating fit results
[Mon Jan 23 23:29:32 2012] Source 78 is offset by 7.618729 and 6.202866 pixels which is larger than
2 X fitted extent = 1.821393 x 1.821393, not incorporating fit results
[Mon Jan 23 23:29:32 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:32 2012] Assessing source extent using major
[Mon Jan 23 23:29:32 2012] Source does appear to be extended
[Mon Jan 23 23:29:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:29:32 2012] Source is confused with source 46
[Tue Jan 24 09:42:47 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:42:47 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Tue Jan 24 09:42:47 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.117
[Tue Jan 24 09:42:47 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 8.12"
[Tue Jan 24 13:17:41 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src66.ximg exists
[Tue Jan 24 13:17:41 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src66_1.ximg exists
[Tue Jan 24 13:17:42 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src66 appears to have run properly
[Tue Jan 24 13:17:44 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Tue Jan 24 13:17:44 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Tue Jan 24 13:17:44 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src66 appears to have run properly
[Tue Jan 24 13:18:55 2012] Source 78 is offset by 3.664292 and 6.324567 pixels which is larger than
2 X fitted extent = 4.334460 x 4.334460, not incorporating fit results
[Tue Jan 24 13:18:55 2012] Source 78 is offset by 7.618729 and 6.202866 pixels which is larger than
2 X fitted extent = 2.104791 x 1.357816, not incorporating fit results
[Tue Jan 24 13:18:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:55 2012] Assessing source extent using major
[Tue Jan 24 13:18:55 2012] Source does appear to be extended
[Tue Jan 24 13:18:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 22:47:23 2012] XMMSAS src. selection expression = ellipse(29197.011444, 28290.831360, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 24 22:47:23 2012] Writing source region out to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src78_src.reg
[Tue Jan 24 22:47:23 2012] Extracting stamp from image fullrun_mos2_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (299, 288) - (374, 363)
[Tue Jan 24 22:47:23 2012] XMMSAS bgd. selection expression = annulus(29197.011444, 28290.831360, 1087.500000, 2175.000000, X, Y) && !ellipse(28495.620180, 27651.916000, 420.028812, 420.028812, 0.000000, X, Y) && !ellipse(26582.213806, 28124.376953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27164.696000, 27752.562000, 149.371204, 149.371204, 0.000000, X, Y) && !ellipse(27627.074000, 27591.138000, 1179.704034, 1179.704034, 0.000000, X, Y) && !ellipse(30170.106800, 28010.291600, 397.955211, 397.955211, 0.000000, X, Y) && !ellipse(27643.697174, 26148.363434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29542.494476, 27972.862396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.010000, 26180.330000, 1134.336033, 1134.336033, 0.000000, X, Y) && !ellipse(27060.645000, 29545.957200, 317.440809, 212.292806, 47.280979, X, Y) && !ellipse(28091.202362, 28752.705566, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 22:47:23 2012] Writing fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src78.gif
[Tue Jan 24 23:12:46 2012] Mean detx,y = (-1385.28, 1264.52) 
[Tue Jan 24 23:12:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 23:12:57 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 23:12:57 2012] Setting source spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Tue Jan 24 23:12:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Wed Jan 25 01:23:11 2012] Not generating rmf since there are only 53 counts
[Wed Jan 25 01:23:11 2012] rmf not generated due to insufficient counts
[Wed Jan 25 01:27:33 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:33 2012] Error reading totcts from fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Wed Jan 25 01:27:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:34 2012] Using photon index=1.80, rate=0.00469, arf fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src78.arf
[Wed Jan 25 01:27:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:34 2012] Updating source flux to 4.7e-14
[Wed Jan 25 01:30:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting