[Mon Jan 23 10:14:59 2012] Detection parameters:
  Position = (264.7, 238.1) = 0 43 2.87 41 10 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.7 +/- 10.3
  Background counts = 5.4
  Rate = 0.008 +/- 0.001

[Mon Jan 23 10:14:59 2012] Off-axis axis estimate = 5.01'
[Mon Jan 23 19:41:45 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:41:45 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Mon Jan 23 19:41:45 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Mon Jan 23 19:41:45 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 8.94"
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src61.ximg exists
[Mon Jan 23 23:28:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src61.csv
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src61_1.ximg exists
[Mon Jan 23 23:28:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src61.csv
[Mon Jan 23 23:28:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Mon Jan 23 23:28:33 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Mon Jan 23 23:29:32 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 11.861424 pixels away
[Mon Jan 23 23:29:32 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:32 2012] Assessing source extent using major
[Mon Jan 23 23:29:32 2012] Source does appear to be extended
[Mon Jan 23 23:29:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:42:47 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:42:47 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Tue Jan 24 09:42:47 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Tue Jan 24 09:42:47 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 8.94"
[Tue Jan 24 13:17:41 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src58.ximg exists
[Tue Jan 24 13:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src58.csv
[Tue Jan 24 13:17:41 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src58_1.ximg exists
[Tue Jan 24 13:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src58.csv
[Tue Jan 24 13:17:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 13:17:43 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Tue Jan 24 13:17:43 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Tue Jan 24 13:17:43 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Tue Jan 24 13:18:55 2012] Spatial fit model total counts = 99.999700, observed total counts = 100.000000
[Tue Jan 24 13:18:55 2012] Offset between fit and detection position for source 68 = 0.060975 pixels
[Tue Jan 24 13:18:55 2012] 100.163500 total counts/ 56.375900 bgd. counts: snr = 5.831824
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.060975 pixels
  Position = (264.6, 238.1) = 0 43 2.88 41 10 14.5
  Extent = 4.1 (2.9-5.3)", rotation angle = 0
  Source counts = 43.8 +/- 10.0
  Background counts = 56.4
  Rate = 0.004 +/- 0.0008
[Tue Jan 24 13:18:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:55 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:55 2012] Source does appear to be extended
[Tue Jan 24 13:18:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 22:47:23 2012] XMMSAS src. selection expression = ellipse(22975.319000, 20668.988800, 246.189607, 246.189607, 0.000000, X, Y)
[Tue Jan 24 22:47:23 2012] Writing source region out to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src68_src.reg
[Tue Jan 24 22:47:23 2012] Extracting stamp from image fullrun_mos2_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (250, 224) - (279, 252)
[Tue Jan 24 22:47:23 2012] XMMSAS bgd. selection expression = annulus(22975.319000, 20668.988800, 410.316012, 820.632024, X, Y) && !ellipse(24127.103400, 21667.569200, 441.438413, 441.438413, 0.000000, X, Y)
[Tue Jan 24 22:47:23 2012] Writing fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src68.gif
[Tue Jan 24 23:10:26 2012] Mean detx,y = (2852.70, -7413.08) 
[Tue Jan 24 23:10:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 23:10:34 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 23:10:34 2012] Setting source spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Tue Jan 24 23:10:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Wed Jan 25 01:22:59 2012] Not generating rmf since there are only 43 counts
[Wed Jan 25 01:22:59 2012] rmf not generated due to insufficient counts
[Wed Jan 25 01:27:33 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:33 2012] Error reading totcts from fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Wed Jan 25 01:27:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:34 2012] Using photon index=1.80, rate=0.00358, arf fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src68.arf
[Wed Jan 25 01:27:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:34 2012] Updating source flux to 6.7e-14
[Wed Jan 25 01:30:49 2012] Source 68 has fewer than 100.000000 counts, skipping spectral fitting