[Mon Jan 23 10:14:59 2012] Detection parameters:
  Position = (250.1, 273.9) = 0 43 8.48 41 12 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.4 +/- 12.9
  Background counts = 8.6
  Rate = 0.01 +/- 0.001

[Mon Jan 23 10:14:59 2012] Off-axis axis estimate = 3.93'
[Mon Jan 23 19:41:45 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:41:45 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Mon Jan 23 19:41:45 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.059
[Mon Jan 23 19:41:45 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 8.39"
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src48.ximg exists
[Mon Jan 23 23:28:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src48.csv
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src48_1.ximg exists
[Mon Jan 23 23:28:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src48.csv
[Mon Jan 23 23:28:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Mon Jan 23 23:28:33 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Mon Jan 23 23:29:31 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 66 at 11.818896 pixels away
[Mon Jan 23 23:29:32 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:32 2012] Assessing source extent using major
[Mon Jan 23 23:29:32 2012] Source does appear to be extended
[Mon Jan 23 23:29:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:42:47 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:42:47 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Tue Jan 24 09:42:47 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.059
[Tue Jan 24 09:42:47 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 8.39"
[Tue Jan 24 13:17:41 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src46.ximg exists
[Tue Jan 24 13:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src46.csv
[Tue Jan 24 13:17:41 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src46_1.ximg exists
[Tue Jan 24 13:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src46.csv
[Tue Jan 24 13:17:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 13:17:43 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Tue Jan 24 13:17:43 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Tue Jan 24 13:17:43 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Tue Jan 24 13:18:55 2012] Spatial fit model total counts = 163.000000, observed total counts = 163.000000
[Tue Jan 24 13:18:55 2012] Offset between fit and detection position for source 66 = 0.052865 pixels
[Tue Jan 24 13:18:55 2012] 165.651600 total counts/ 97.556000 bgd. counts: snr = 6.894330
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 0.052865 pixels
  Position = (250.2, 273.8) = 0 43 8.47 41 12 49.7
  Extent = 4.0 (3.3-5.0)", rotation angle = 0
  Source counts = 68.1 +/- 12.9
  Background counts = 97.6
  Rate = 0.006 +/- 0.001
[Tue Jan 24 13:18:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:55 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:55 2012] Source does appear to be extended
[Tue Jan 24 13:18:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 22:47:23 2012] XMMSAS src. selection expression = ellipse(21714.894700, 23773.786200, 240.219607, 240.219607, 0.000000, X, Y)
[Tue Jan 24 22:47:23 2012] Writing source region out to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src66_src.reg
[Tue Jan 24 22:47:23 2012] Extracting stamp from image fullrun_mos2_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (236, 260) - (264, 288)
[Tue Jan 24 22:47:23 2012] XMMSAS bgd. selection expression = annulus(21714.894700, 23773.786200, 400.366012, 800.732023, X, Y)
[Tue Jan 24 22:47:23 2012] Writing fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src66.gif
[Tue Jan 24 23:08:18 2012] Mean detx,y = (4788.95, -4689.64) 
[Tue Jan 24 23:08:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 23:08:25 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 23:08:25 2012] Setting source spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Tue Jan 24 23:08:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Wed Jan 25 01:22:38 2012] Not generating rmf since there are only 68 counts
[Wed Jan 25 01:22:38 2012] rmf not generated due to insufficient counts
[Wed Jan 25 01:27:33 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:33 2012] Error reading totcts from fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Wed Jan 25 01:27:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:34 2012] Using photon index=1.80, rate=0.00557, arf fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src66.arf
[Wed Jan 25 01:27:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:34 2012] Updating source flux to 1.1e-13
[Wed Jan 25 01:30:49 2012] Source 66 has fewer than 100.000000 counts, skipping spectral fitting