[Mon Jan 23 10:14:59 2012] Detection parameters:
  Position = (403.3, 341.6) = 0 42 9.39 41 17 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.8 +/- 10.7
  Background counts = 6.7
  Rate = 0.009 +/- 0.001

[Mon Jan 23 10:14:59 2012] Off-axis axis estimate = 8.22'
[Mon Jan 23 19:41:45 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:41:45 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Mon Jan 23 19:41:45 2012] source mask rpix=2.4, npix_max = 34, mask sum = 20, frac = 0.585
[Mon Jan 23 19:41:45 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 10.54"
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src55.ximg exists
[Mon Jan 23 23:28:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src55.csv
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon Jan 23 23:28:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src55.csv
[Mon Jan 23 23:28:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Jan 23 23:28:33 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Mon Jan 23 23:29:31 2012] Spatial fit model total counts = 719.543000, observed total counts = 723.000000
[Mon Jan 23 23:29:31 2012] Offset between fit and detection position for source 55 = 2.810870 pixels
[Mon Jan 23 23:29:31 2012] Warning, changing simple spatial fit ID from 55 to 13
[Mon Jan 23 23:29:31 2012] 702.385020 total counts/ 702.385000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 2.810870 pixels
  Position = (403.6, 344.4) = 0 42 9.27 41 17 56.4
  Extent = 20.9 (2.6-39.1)", rotation angle = 0
  Source counts = 0.0 +/- 26.5
  Background counts = 702.4
  Rate = 2e-09 +/- 0.002
  Deleting source due to low Poisson probability