[Mon Jan 23 10:14:59 2012] Detection parameters:
  Position = (280.4, 355.2) = 0 42 56.81 41 18 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.0 +/- 15.1
  Background counts = 16.4
  Rate = 0.01 +/- 0.002

[Mon Jan 23 10:14:59 2012] Off-axis axis estimate = 4.32'
[Mon Jan 23 19:41:45 2012] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:41:45 2012] Initial guess for spatial extent in simple fitting = 8.59"
[Mon Jan 23 19:41:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.021
[Mon Jan 23 19:41:45 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 8.59"
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src46.ximg exists
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src46_1.ximg exists
[Mon Jan 23 23:28:32 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src46 appears to have run properly
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Mon Jan 23 23:28:33 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Mon Jan 23 23:29:31 2012] Spatial fit model total counts = 572.723000, observed total counts = 576.000000
[Mon Jan 23 23:29:31 2012] Offset between fit and detection position for source 52 = 5.731420 pixels
[Mon Jan 23 23:29:31 2012] 560.376000 total counts/ 115.930000 bgd. counts: snr = 41.278232
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 5.731420 pixels
  Position = (285.4, 352.4) = 0 42 54.88 41 18 31.7
  Extent = 17.2 (17.2-34.4)", rotation angle = 0
  Source counts = 444.4 +/- 23.7
  Background counts = 115.9
  Rate = 0.04 +/- 0.002
[Mon Jan 23 23:29:32 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:32 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:29:32 2012] Source does appear to be extended
[Mon Jan 23 23:29:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:29:32 2012] Source is confused with source 18
[Tue Jan 24 09:42:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:42:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 24 09:42:47 2012] Initial guess for spatial extent in simple fitting = 17.18"
[Tue Jan 24 09:42:47 2012] source mask rpix=3.9, npix_max = 79, mask sum = 81, frac = 1.023
[Tue Jan 24 09:42:47 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 17.18"
[Tue Jan 24 13:17:41 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src44.ximg exists
[Tue Jan 24 13:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src44.csv
[Tue Jan 24 13:17:41 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src44_1.ximg exists
[Tue Jan 24 13:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src44.csv
[Tue Jan 24 13:17:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 13:17:43 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Tue Jan 24 13:17:43 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Tue Jan 24 13:17:43 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Tue Jan 24 13:18:55 2012] Source 52 is offset by -7.982437 and -4.072414 pixels which is larger than
2 X fitted extent = 1.485972 x 1.485972, not incorporating fit results
[Tue Jan 24 13:18:55 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 16.704866 pixels away
[Tue Jan 24 13:18:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:55 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:55 2012] Source does appear to be extended
[Tue Jan 24 13:18:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 22:47:23 2012] XMMSAS src. selection expression = ellipse(24783.148000, 30612.462000, 1030.608030, 1030.608030, 0.000000, X, Y)
[Tue Jan 24 22:47:23 2012] Writing source region out to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src52_src.reg
[Tue Jan 24 22:47:23 2012] Extracting stamp from image fullrun_mos2_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (226, 293) - (345, 412)
[Tue Jan 24 22:47:23 2012] XMMSAS bgd. selection expression = annulus(24783.148000, 30612.462000, 1717.680049, 3435.360099, X, Y) && !ellipse(28495.620180, 27651.916000, 420.028812, 420.028812, 0.000000, X, Y) && !ellipse(26582.213806, 28124.376953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.922000, 26872.661800, 659.960019, 380.371211, 127.153000, X, Y) && !ellipse(25345.496800, 31068.402600, 449.203213, 362.536010, 5.139090, X, Y) && !ellipse(24852.626000, 27662.570000, 339.703210, 339.703210, 0.000000, X, Y) && !ellipse(27164.696000, 27752.562000, 149.371204, 149.371204, 0.000000, X, Y) && !ellipse(27627.074000, 27591.138000, 1179.704034, 1179.704034, 0.000000, X, Y) && !ellipse(25344.445800, 27182.378400, 290.507208, 290.507208, 0.000000, X, Y) && !ellipse(23702.049765, 27692.178470, 376.278126, 343.237433, 220.984568, X, Y) && !ellipse(23736.883200, 31577.188800, 371.932011, 371.932011, 0.000000, X, Y) && !ellipse(22802.327800, 30086.430200, 413.827212, 413.827212, 0.000000, X, Y) && !ellipse(22969.198400, 26861.685200, 443.635213, 322.356809, 53.229000, X, Y) && !ellipse(22929.685062, 34051.246839, 315.057436, 219.727927, 99.098512, X, Y) && !ellipse(26118.762512, 30308.645660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.010000, 26180.330000, 1134.336033, 1134.336033, 0.000000, X, Y) && !ellipse(24045.112946, 27001.700470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27060.645000, 29545.957200, 317.440809, 212.292806, 47.280979, X, Y) && !ellipse(25464.788971, 28137.893707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28091.202362, 28752.705566, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 22:47:23 2012] Writing fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src52.gif
[Tue Jan 24 23:07:50 2012] Mean detx,y = (3138.62, 3009.11) 
[Tue Jan 24 23:07:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 23:08:06 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 23:08:06 2012] Setting source spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Tue Jan 24 23:08:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Wed Jan 25 01:27:33 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:33 2012] Error reading totcts from fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Wed Jan 25 01:27:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:34 2012] Using photon index=1.80, rate=0.0363, arf fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src52.arf
[Wed Jan 25 01:27:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:34 2012] Updating source flux to 4.3e-13
[Wed Jan 25 01:30:49 2012] Flag b found in src. 52 procflags, skipping spectral fitting
[Wed Jan 25 01:30:49 2012] Flag c found in src. 52 procflags, skipping spectral fitting