[Mon Jan 23 10:14:58 2012] Detection parameters:
  Position = (404.8, 384.0) = 0 42 8.78 41 20 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.1 +/- 11.7
  Background counts = 5.1
  Rate = 0.01 +/- 0.002

[Mon Jan 23 10:14:59 2012] Off-axis axis estimate = 9.90'
[Mon Jan 23 19:41:45 2012] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:41:45 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Mon Jan 23 19:41:45 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.927
[Mon Jan 23 19:41:45 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 11.38"
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src41.ximg exists
[Mon Jan 23 23:28:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src41.csv
[Mon Jan 23 23:28:32 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src41_1.ximg exists
[Mon Jan 23 23:28:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src41.csv
[Mon Jan 23 23:28:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Mon Jan 23 23:28:33 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Mon Jan 23 23:29:31 2012] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 14.985474 pixels away
[Mon Jan 23 23:29:32 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:32 2012] Assessing source extent using major
[Mon Jan 23 23:29:32 2012] Source does appear to be extended
[Mon Jan 23 23:29:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:42:47 2012] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:42:47 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Tue Jan 24 09:42:47 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.927
[Tue Jan 24 09:42:47 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 11.38"
[Tue Jan 24 13:17:41 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src39.ximg exists
[Tue Jan 24 13:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src39.csv
[Tue Jan 24 13:17:41 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src39_1.ximg exists
[Tue Jan 24 13:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src39.csv
[Tue Jan 24 13:17:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 13:17:43 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Tue Jan 24 13:17:43 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Tue Jan 24 13:17:43 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Tue Jan 24 13:18:55 2012] Spatial fit model total counts = 140.303000, observed total counts = 140.000000
[Tue Jan 24 13:18:55 2012] Offset between fit and detection position for source 43 = 0.266212 pixels
[Tue Jan 24 13:18:55 2012] 137.251500 total counts/ 77.342400 bgd. counts: snr = 6.812146
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.266212 pixels
  Position = (404.6, 383.8) = 0 42 8.85 41 20 47.9
  Extent = 5.5 (4.3-11.1)", rotation angle = 0
  Source counts = 59.9 +/- 11.7
  Background counts = 77.3
  Rate = 0.005 +/- 0.001
[Tue Jan 24 13:18:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:55 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:55 2012] Source does appear to be extended
[Tue Jan 24 13:18:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 22:47:23 2012] XMMSAS src. selection expression = ellipse(35150.948800, 33345.063800, 328.345809, 328.345809, 0.000000, X, Y)
[Tue Jan 24 22:47:23 2012] Writing source region out to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src43_src.reg
[Tue Jan 24 22:47:23 2012] Extracting stamp from image fullrun_mos2_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (386, 365) - (423, 403)
[Tue Jan 24 22:47:23 2012] XMMSAS bgd. selection expression = annulus(35150.948800, 33345.063800, 547.243016, 1094.486031, X, Y) && !ellipse(33673.171800, 33038.509800, 592.353617, 592.353617, 0.000000, X, Y)
[Tue Jan 24 22:47:23 2012] Writing fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src43.gif
[Tue Jan 24 23:06:55 2012] Mean detx,y = (-6084.22, 7728.60) 
[Tue Jan 24 23:06:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 23:07:02 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 23:07:03 2012] Setting source spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Tue Jan 24 23:07:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Jan 25 01:14:57 2012] Not generating rmf since there are only 59 counts
[Wed Jan 25 01:14:57 2012] rmf not generated due to insufficient counts
[Wed Jan 25 01:27:33 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:33 2012] Error reading totcts from fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Jan 25 01:27:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:34 2012] Using photon index=1.80, rate=0.0049, arf fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src43.arf
[Wed Jan 25 01:27:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:34 2012] Updating source flux to 1e-13
[Wed Jan 25 01:30:49 2012] Source 43 has fewer than 100.000000 counts, skipping spectral fitting