[Mon Jan 23 10:14:58 2012] Detection parameters:
  Position = (354.8, 267.9) = 0 42 28.12 41 12 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1037.8 +/- 39.3
  Background counts = 15.2
  Rate = 0.1 +/- 0.004

[Mon Jan 23 10:14:59 2012] Off-axis axis estimate = 4.65'
[Mon Jan 23 19:41:45 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 19:41:45 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Mon Jan 23 19:41:45 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Mon Jan 23 19:41:45 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.75"
[Mon Jan 23 23:28:31 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src10.ximg exists
[Mon Jan 23 23:28:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src10.csv
[Mon Jan 23 23:28:31 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Jan 23 23:28:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src10.csv
[Mon Jan 23 23:28:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Jan 23 23:28:33 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jan 23 23:28:33 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Jan 23 23:29:31 2012] Warning, spatial fit 10 centroid is now closest to src. 82
[Mon Jan 23 23:29:32 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:32 2012] Assessing source extent using major
[Mon Jan 23 23:29:32 2012] Source does appear to be extended
[Mon Jan 23 23:29:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:42:47 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:42:47 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Tue Jan 24 09:42:47 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Tue Jan 24 09:42:47 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.75"
[Tue Jan 24 13:17:40 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jan 24 13:17:40 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jan 24 13:17:40 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_src10 appears to have run properly
[Tue Jan 24 13:17:42 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jan 24 13:17:42 2012] fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jan 24 13:17:42 2012] Fit fullrun_mos2_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Jan 24 13:18:54 2012] Warning, spatial fit 10 centroid is now closest to src. 82
[Tue Jan 24 13:18:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:55 2012] Assessing source extent using major
[Tue Jan 24 13:18:55 2012] Source does appear to be extended
[Tue Jan 24 13:18:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 22:47:22 2012] Counts = 1037.778931, rescaling region sizes by 2.000000
[Tue Jan 24 22:47:22 2012] XMMSAS src. selection expression = ellipse(30821.177826, 23255.440857, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jan 24 22:47:22 2012] Writing source region out to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src16_src.reg
[Tue Jan 24 22:47:22 2012] Extracting stamp from image fullrun_mos2_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (280, 193) - (430, 343)
[Tue Jan 24 22:47:22 2012] XMMSAS bgd. selection expression = annulus(30821.177826, 23255.440857, 4350.000000, 8700.000000, X, Y) && !ellipse(28495.620180, 27651.916000, 420.028812, 420.028812, 0.000000, X, Y) && !ellipse(26582.213806, 28124.376953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.922000, 26872.661800, 659.960019, 380.371211, 127.153000, X, Y) && !ellipse(25345.496800, 31068.402600, 449.203213, 362.536010, 5.139090, X, Y) && !ellipse(24852.626000, 27662.570000, 339.703210, 339.703210, 0.000000, X, Y) && !ellipse(32017.570681, 27082.087229, 345.397895, 286.999507, 15.006128, X, Y) && !ellipse(27164.696000, 27752.562000, 149.371204, 149.371204, 0.000000, X, Y) && !ellipse(27627.074000, 27591.138000, 1179.704034, 1179.704034, 0.000000, X, Y) && !ellipse(30170.106800, 28010.291600, 397.955211, 397.955211, 0.000000, X, Y) && !ellipse(34249.787079, 30683.965912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25344.445800, 27182.378400, 290.507208, 290.507208, 0.000000, X, Y) && !ellipse(33055.147205, 23261.674113, 396.356457, 345.037932, 288.345138, X, Y) && !ellipse(33693.102000, 23496.558000, 547.895216, 547.895216, 0.000000, X, Y) && !ellipse(23702.049765, 27692.178470, 376.278126, 343.237433, 220.984568, X, Y) && !ellipse(23736.883200, 31577.188800, 371.932011, 371.932011, 0.000000, X, Y) && !ellipse(22802.327800, 30086.430200, 413.827212, 413.827212, 0.000000, X, Y) && !ellipse(22969.198400, 26861.685200, 443.635213, 322.356809, 53.229000, X, Y) && !ellipse(24127.103400, 21667.569200, 441.438413, 441.438413, 0.000000, X, Y) && !ellipse(35428.920420, 30313.089800, 389.444011, 389.444011, 0.000000, X, Y) && !ellipse(29924.193000, 24263.488200, 445.957613, 445.957613, 0.000000, X, Y) && !ellipse(32352.739441, 27603.428345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30817.495546, 20399.476923, 488.242743, 338.820058, 348.358523, X, Y) && !ellipse(27089.329020, 22329.993600, 303.632009, 303.632009, 0.000000, X, Y) && !ellipse(34454.542400, 29944.001800, 357.032810, 254.884007, 40.399000, X, Y) && !ellipse(30148.006460, 31968.048800, 359.548010, 359.548010, 0.000000, X, Y) && !ellipse(27643.697174, 26148.363434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30602.848962, 13913.614160, 801.976023, 345.348980, 0.427002, X, Y) && !ellipse(35905.764200, 24599.256000, 490.719214, 328.622409, 90.353473, X, Y) && !ellipse(29542.494476, 27972.862396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26118.762512, 30308.645660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39094.795600, 25944.045200, 325.240809, 325.240809, 0.000000, X, Y) && !ellipse(26870.010000, 26180.330000, 1134.336033, 1134.336033, 0.000000, X, Y) && !ellipse(24783.148000, 30612.462000, 1374.144040, 1374.144040, 0.000000, X, Y) && !ellipse(31302.081000, 31476.127400, 391.588011, 391.588011, 0.000000, X, Y) && !ellipse(24045.112946, 27001.700470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27016.338520, 25341.610400, 250.257607, 250.257607, 0.000000, X, Y) && !ellipse(28327.894180, 25716.696200, 261.449608, 261.449608, 0.000000, X, Y) && !ellipse(33672.592000, 29210.396600, 290.224008, 290.224008, 0.000000, X, Y) && !ellipse(27060.645000, 29545.957200, 317.440809, 212.292806, 47.280979, X, Y) && !ellipse(34546.927338, 21372.259109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28967.603638, 24991.009613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28030.234000, 24545.913200, 315.752809, 315.752809, 0.000000, X, Y) && !ellipse(22975.319000, 20668.988800, 328.252809, 328.252809, 0.000000, X, Y) && !ellipse(25464.788971, 28137.893707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29117.766785, 32540.362396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34879.789200, 26557.119200, 786.545623, 786.545623, 0.000000, X, Y) && !ellipse(28091.202362, 28752.705566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29197.011444, 28290.831360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32361.965668, 25501.579712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35054.068000, 23848.577000, 1631.240047, 1631.240047, 0.000000, X, Y)
[Tue Jan 24 22:47:22 2012] Writing fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src16.gif
[Tue Jan 24 22:53:18 2012] Mean detx,y = (-4056.38, -2992.66) 
[Tue Jan 24 22:53:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 22:55:01 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 22:55:01 2012] Setting source spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jan 24 22:55:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Jan 24 23:46:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 24 23:46:39 2012] rmf not generated due to insufficient counts
[Wed Jan 25 01:27:32 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:33 2012] Error reading totcts from fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Jan 25 01:27:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:33 2012] Using photon index=1.80, rate=0.0976, arf fullrun_mos2_xmm0112570601_pi300-10000_pass1_cl_src16.arf
[Wed Jan 25 01:27:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:33 2012] Updating source flux to 1e-12
[Wed Jan 25 01:30:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting