[Mon Jan 23 10:14:16 2012] Detection parameters: Position = (368.3, 292.0) = 0 42 22.91 41 14 7.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 87.8 +/- 13.4 Background counts = 15.7 Rate = 0.008 +/- 0.001 [Mon Jan 23 10:14:16 2012] Off-axis axis estimate = 5.09' [Mon Jan 23 15:44:38 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting [Mon Jan 23 15:44:38 2012] Initial guess for spatial extent in simple fitting = 8.97" [Mon Jan 23 15:44:38 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.142 [Mon Jan 23 15:44:38 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 8.97" [Mon Jan 23 19:41:42 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src57.ximg exists [Mon Jan 23 19:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src57.csv [Mon Jan 23 19:41:42 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src57_1.ximg exists [Mon Jan 23 19:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src57.csv [Mon Jan 23 19:41:42 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src57_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jan 23 19:41:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src57.ximg exists [Mon Jan 23 19:41:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists [Mon Jan 23 19:41:45 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly [Mon Jan 23 23:29:14 2012] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 10.173894 pixels away [Mon Jan 23 23:29:14 2012] Source 74 is offset by -5.138114 and 8.310559 pixels which is larger than 2 X fitted extent = 10.335114 x 1.307439, not incorporating fit results [Mon Jan 23 23:29:14 2012] Vigneting correction estimate = 1.000000 [Mon Jan 23 23:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 23 23:29:14 2012] Assessing source extent using major [Mon Jan 23 23:29:14 2012] Source does appear to be extended [Mon Jan 23 23:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jan 23 23:29:14 2012] Source is confused with source 76 [Tue Jan 24 04:14:38 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting [Tue Jan 24 04:14:38 2012] Initial guess for spatial extent in simple fitting = 8.97" [Tue Jan 24 04:14:38 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.142 [Tue Jan 24 04:14:38 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 8.97" [Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src56.ximg exists [Tue Jan 24 09:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src56.csv [Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src56_1.ximg exists [Tue Jan 24 09:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src56.csv [Tue Jan 24 09:42:46 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src56_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jan 24 09:42:47 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src56.ximg exists [Tue Jan 24 09:42:47 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists [Tue Jan 24 09:42:47 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly [Tue Jan 24 13:18:33 2012] Spatial fit model total counts = 407.661000, observed total counts = 407.000000 [Tue Jan 24 13:18:33 2012] Offset between fit and detection position for source 74 = 2.589410 pixels [Tue Jan 24 13:18:33 2012] 372.237000 total counts/ 263.360000 bgd. counts: snr = 6.709053 Spatial fit parameters: Offset between fit and detection position for source 74 = 2.589410 pixels Position = (370.1, 293.9) = 0 42 22.23 41 14 16.9 Extent = 10.7 (8.5-14.2)", rotation angle = 0 Source counts = 108.9 +/- 19.3 Background counts = 263.4 Rate = 0.009 +/- 0.002 [Tue Jan 24 13:18:33 2012] Vigneting correction estimate = 1.000000 [Tue Jan 24 13:18:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jan 24 13:18:33 2012] Assessing source extent using major axis lower bound [Tue Jan 24 13:18:33 2012] Source does appear to be extended [Tue Jan 24 13:18:33 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jan 24 20:19:49 2012] XMMSAS src. selection expression = ellipse(32149.299000, 25519.175000, 643.140019, 643.140019, 0.000000, X, Y) [Tue Jan 24 20:19:49 2012] Writing source region out to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src74_src.reg [Tue Jan 24 20:19:49 2012] Extracting stamp from image fullrun_mos1_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (333, 257) - (407, 331) [Tue Jan 24 20:19:49 2012] XMMSAS bgd. selection expression = annulus(32149.299000, 25519.175000, 1071.900031, 2143.800062, X, Y) && !ellipse(32026.122000, 27079.010280, 382.980811, 382.980811, 0.000000, X, Y) && !ellipse(30816.571840, 23239.571200, 406.861612, 406.861612, 0.000000, X, Y) && !ellipse(30174.784200, 28010.756000, 369.424811, 369.424811, 0.000000, X, Y) && !ellipse(33001.309800, 25211.004400, 376.429611, 376.429611, 0.000000, X, Y) && !ellipse(33026.743660, 23259.336580, 357.824810, 357.824810, 0.000000, X, Y) && !ellipse(32362.778107, 27557.079498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29943.887115, 24245.732269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29552.703064, 27964.095490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32238.936000, 24660.544000, 1412.872041, 176.608805, 11.466000, X, Y) && !ellipse(28820.540000, 25196.460000, 1188.080034, 1188.080034, 0.000000, X, Y) && !ellipse(31581.437500, 24854.164093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34909.198120, 26596.373077, 870.000000, 870.000000, 0.000000, X, Y) [Tue Jan 24 20:19:49 2012] Writing fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src74.gif [Tue Jan 24 20:38:09 2012] Mean detx,y = (-444.51, 4842.87) [Tue Jan 24 20:38:10 2012] Setting backscal keywords in source and bgd. spectrum [Tue Jan 24 20:38:31 2012] Binned source spectrum to 10 counts/bin [Tue Jan 24 20:38:32 2012] Setting source spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src74_src_b10.pi.gz [Tue Jan 24 20:38:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src74_bgd.pi.gz [Wed Jan 25 01:27:31 2012] Updating aperture counts using extracted products [Wed Jan 25 01:27:31 2012] Error reading totcts from fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src74_src_b10.pi.gz [Wed Jan 25 01:27:32 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jan 25 01:27:32 2012] Using photon index=1.80, rate=0.0089, arf fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src74.arf [Wed Jan 25 01:27:32 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jan 25 01:27:32 2012] Updating source flux to 9.7e-14 [Wed Jan 25 01:27:37 2012] Flag b found in src. 74 procflags, skipping spectral fitting [Wed Jan 25 01:27:37 2012] Flag c found in src. 74 procflags, skipping spectral fitting