[Mon Jan 23 10:14:16 2012] Detection parameters:
  Position = (309.6, 302.1) = 0 42 45.56 41 14 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.4 +/- 12.7
  Background counts = 26.6
  Rate = 0.004 +/- 0.001

[Mon Jan 23 10:14:16 2012] Off-axis axis estimate = 0.85'
[Mon Jan 23 15:44:38 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:44:38 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Mon Jan 23 15:44:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Mon Jan 23 15:44:38 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 6.85"
[Mon Jan 23 19:41:43 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src73.ximg exists
[Mon Jan 23 19:41:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src73.csv
[Mon Jan 23 19:41:43 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src73_1.ximg exists
[Mon Jan 23 19:41:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src73.csv
[Mon Jan 23 19:41:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:41:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Mon Jan 23 19:41:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Mon Jan 23 19:41:45 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Mon Jan 23 23:29:14 2012] Source 72 is offset by -7.613125 and 3.392980 pixels which is larger than
2 X fitted extent = 0.797917 x 0.797917, not incorporating fit results
[Mon Jan 23 23:29:14 2012] Source 72 is offset by 6.895380 and -6.767802 pixels which is larger than
2 X fitted extent = 2.406455 x 2.406455, not incorporating fit results
[Mon Jan 23 23:29:14 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:14 2012] Assessing source extent using major
[Mon Jan 23 23:29:14 2012] Source does appear to be extended
[Mon Jan 23 23:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 04:14:38 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 04:14:38 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Tue Jan 24 04:14:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Tue Jan 24 04:14:38 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 6.85"
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src69.ximg exists
[Tue Jan 24 09:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src69.csv
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src69_1.ximg exists
[Tue Jan 24 09:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src69.csv
[Tue Jan 24 09:42:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:42:47 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Tue Jan 24 09:42:47 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Tue Jan 24 09:42:47 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Tue Jan 24 13:18:33 2012] Warning, spatial fit 69 centroid is now closest to src. 3
[Tue Jan 24 13:18:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:33 2012] Assessing source extent using major
[Tue Jan 24 13:18:33 2012] Source does appear to be extended
[Tue Jan 24 13:18:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 20:19:49 2012] XMMSAS src. selection expression = ellipse(26886.042084, 26236.011261, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 24 20:19:49 2012] Writing source region out to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src72_src.reg
[Tue Jan 24 20:19:49 2012] Extracting stamp from image fullrun_mos1_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (272, 265) - (347, 340)
[Tue Jan 24 20:19:49 2012] XMMSAS bgd. selection expression = annulus(26886.042084, 26236.011261, 1087.500000, 2175.000000, X, Y) && !ellipse(28495.001180, 27654.753800, 426.515212, 426.515212, 0.000000, X, Y) && !ellipse(26588.102820, 28088.507600, 552.374416, 552.374416, 0.000000, X, Y) && !ellipse(26286.144000, 26824.416000, 416.496812, 416.496812, 0.000000, X, Y) && !ellipse(26288.810000, 28371.122000, 1170.624034, 1170.624034, 0.000000, X, Y) && !ellipse(25118.190000, 27505.860000, 1170.624034, 626.763218, 59.738000, X, Y) && !ellipse(28101.568000, 28305.368000, 1291.456037, 794.352023, 3.959280, X, Y) && !ellipse(25328.588000, 27181.044000, 222.110406, 222.110406, 0.000000, X, Y) && !ellipse(27638.281600, 26075.514400, 359.849610, 219.457606, 121.422600, X, Y) && !ellipse(29552.703064, 27964.095490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27423.544000, 24381.121800, 271.200808, 271.200808, 0.000000, X, Y) && !ellipse(28927.369000, 25014.322000, 304.984809, 296.119209, 2.339230, X, Y) && !ellipse(28518.194794, 28877.757446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24030.430634, 26999.706543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27025.078320, 25347.048200, 344.958410, 344.958410, 0.000000, X, Y) && !ellipse(28820.540000, 25196.460000, 1188.080034, 1188.080034, 0.000000, X, Y) && !ellipse(28026.138214, 24508.795227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25765.595825, 28040.969208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.576721, 28796.749847, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 20:19:49 2012] Writing fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src72.gif
[Tue Jan 24 20:43:04 2012] Mean detx,y = (-773.03, -539.61) 
[Tue Jan 24 20:43:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 20:43:22 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 20:43:22 2012] Setting source spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Tue Jan 24 20:43:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Tue Jan 24 22:47:17 2012] Not generating rmf since there are only 51 counts
[Tue Jan 24 22:47:17 2012] rmf not generated due to insufficient counts
[Wed Jan 25 01:27:31 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:31 2012] Error reading totcts from fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Wed Jan 25 01:27:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:32 2012] Using photon index=1.80, rate=0.00434, arf fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src72.arf
[Wed Jan 25 01:27:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:32 2012] Updating source flux to 4.4e-14
[Wed Jan 25 01:27:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting