[Mon Jan 23 10:14:15 2012] Detection parameters:
  Position = (306.1, 323.8) = 0 42 46.89 41 16 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2035.7 +/- 55.2
  Background counts = 30.4
  Rate = 0.2 +/- 0.005

[Mon Jan 23 10:14:16 2012] Off-axis axis estimate = 1.92'
[Mon Jan 23 15:44:38 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:44:38 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Mon Jan 23 15:44:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Mon Jan 23 15:44:38 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.39"
[Mon Jan 23 19:41:41 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jan 23 19:41:41 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jan 23 19:41:41 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src2 appears to have run properly
[Mon Jan 23 19:41:43 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jan 23 19:41:43 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jan 23 19:41:43 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Jan 23 23:29:14 2012] Spatial fit model total counts = 3735.170000, observed total counts = 3720.000000
[Mon Jan 23 23:29:14 2012] Offset between fit and detection position for source 6 = 0.242918 pixels
[Mon Jan 23 23:29:14 2012] 3792.850000 total counts/ 2706.460000 bgd. counts: snr = 20.882618
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.242918 pixels
  Position = (306.0, 323.6) = 0 42 46.96 41 16 26.6
  Extent = 5.3 (5.0-5.7)", rotation angle = 0
  Source counts = 1086.4 +/- 61.6
  Background counts = 2706.5
  Rate = 0.09 +/- 0.005
[Mon Jan 23 23:29:14 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:14 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:29:14 2012] Source does appear to be extended
[Mon Jan 23 23:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:29:14 2012] Source is confused with source 2
[Tue Jan 24 04:14:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 04:14:38 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Tue Jan 24 04:14:38 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.005
[Tue Jan 24 04:14:38 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.34"
[Tue Jan 24 09:42:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jan 24 09:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src2.csv
[Tue Jan 24 09:42:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jan 24 09:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src2.csv
[Tue Jan 24 09:42:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jan 24 09:42:46 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jan 24 13:18:33 2012] Spatial fit model total counts = 3709.580000, observed total counts = 3720.000000
[Tue Jan 24 13:18:33 2012] Offset between fit and detection position for source 6 = 0.314656 pixels
[Tue Jan 24 13:18:33 2012] 3081.570000 total counts/ 1648.880000 bgd. counts: snr = 35.282366
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.314656 pixels
  Position = (306.2, 323.4) = 0 42 46.88 41 16 25.5
  Extent = 6.9 (6.3-7.4)", rotation angle = 0
  Source counts = 1432.7 +/- 55.5
  Background counts = 1648.9
  Rate = 0.1 +/- 0.005
[Tue Jan 24 13:18:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:33 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:33 2012] Source does appear to be extended
[Tue Jan 24 13:18:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 20:19:47 2012] Counts = 1432.690000, rescaling region sizes by 2.000000
[Tue Jan 24 20:19:47 2012] XMMSAS src. selection expression = ellipse(26588.102820, 28088.507600, 828.561624, 828.561624, 0.000000, X, Y)
[Tue Jan 24 20:19:47 2012] Writing source region out to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src6_src.reg
[Tue Jan 24 20:19:47 2012] Extracting stamp from image fullrun_mos1_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (259, 276) - (354, 371)
[Tue Jan 24 20:19:47 2012] XMMSAS bgd. selection expression = annulus(26588.102820, 28088.507600, 2761.872079, 5523.744159, X, Y) && !ellipse(28495.001180, 27654.753800, 426.515212, 426.515212, 0.000000, X, Y) && !ellipse(21269.534698, 26219.924438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26286.144000, 26824.416000, 416.496812, 416.496812, 0.000000, X, Y) && !ellipse(26288.810000, 28371.122000, 1170.624034, 1170.624034, 0.000000, X, Y) && !ellipse(25357.659340, 31075.844800, 407.939212, 407.939212, 0.000000, X, Y) && !ellipse(25118.190000, 27505.860000, 1170.624034, 626.763218, 59.738000, X, Y) && !ellipse(32026.122000, 27079.010280, 382.980811, 382.980811, 0.000000, X, Y) && !ellipse(30816.571840, 23239.571200, 406.861612, 406.861612, 0.000000, X, Y) && !ellipse(28101.568000, 28305.368000, 1291.456037, 794.352023, 3.959280, X, Y) && !ellipse(30174.784200, 28010.756000, 369.424811, 369.424811, 0.000000, X, Y) && !ellipse(25328.588000, 27181.044000, 222.110406, 222.110406, 0.000000, X, Y) && !ellipse(23747.556000, 31564.870400, 443.780813, 365.252811, 330.956000, X, Y) && !ellipse(22994.474100, 26855.715600, 481.793614, 350.445610, 77.794500, X, Y) && !ellipse(22805.855400, 30090.458000, 469.553614, 469.553614, 0.000000, X, Y) && !ellipse(23693.970960, 27689.556600, 420.283212, 326.573609, 91.712200, X, Y) && !ellipse(32362.778107, 27557.079498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29943.887115, 24245.732269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27076.087200, 22347.922000, 340.323210, 340.323210, 0.000000, X, Y) && !ellipse(30149.931980, 31957.904200, 355.369610, 355.369610, 0.000000, X, Y) && !ellipse(27638.281600, 26075.514400, 359.849610, 219.457606, 121.422600, X, Y) && !ellipse(29240.720626, 32487.588655, 449.455249, 294.059927, 31.955593, X, Y) && !ellipse(29552.703064, 27964.095490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32238.936000, 24660.544000, 1412.872041, 176.608805, 11.466000, X, Y) && !ellipse(27423.544000, 24381.121800, 271.200808, 271.200808, 0.000000, X, Y) && !ellipse(22937.445343, 34040.371643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31341.446747, 31465.173767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24381.991028, 30814.455292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26107.053833, 30288.103699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.436700, 23756.398200, 381.117611, 381.117611, 0.000000, X, Y) && !ellipse(27168.173462, 22710.174835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28927.369000, 25014.322000, 304.984809, 296.119209, 2.339230, X, Y) && !ellipse(28518.194794, 28877.757446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24030.430634, 26999.706543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27025.078320, 25347.048200, 344.958410, 344.958410, 0.000000, X, Y) && !ellipse(28820.540000, 25196.460000, 1188.080034, 1188.080034, 0.000000, X, Y) && !ellipse(32149.299000, 25519.175000, 857.520025, 857.520025, 0.000000, X, Y) && !ellipse(28026.138214, 24508.795227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31581.437500, 24854.164093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25765.595825, 28040.969208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29478.987000, 34563.287800, 1116.280032, 538.540015, 17.027397, X, Y) && !ellipse(20732.935300, 30176.414000, 712.023220, 712.023220, 0.000000, X, Y) && !ellipse(26886.042084, 26236.011261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.576721, 28796.749847, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 20:19:47 2012] Writing fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src6.gif
[Tue Jan 24 20:20:13 2012] Mean detx,y = (821.43, -1027.60) 
[Tue Jan 24 20:20:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 20:20:39 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 20:20:39 2012] Setting source spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jan 24 20:20:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jan 25 01:27:31 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:31 2012] Error reading totcts from fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jan 25 01:27:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:32 2012] Using photon index=1.80, rate=0.117, arf fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src6.arf
[Wed Jan 25 01:27:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:32 2012] Updating source flux to 1.1e-12
[Wed Jan 25 01:27:37 2012] Flag c found in src. 6 procflags, skipping spectral fitting