[Mon Jan 23 10:14:16 2012] Detection parameters:
  Position = (333.0, 287.9) = 0 42 36.53 41 13 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.4 +/- 14.8
  Background counts = 21.2
  Rate = 0.01 +/- 0.001

[Mon Jan 23 10:14:16 2012] Off-axis axis estimate = 2.62'
[Mon Jan 23 15:44:38 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:44:38 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Mon Jan 23 15:44:38 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.770
[Mon Jan 23 15:44:38 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 7.74"
[Mon Jan 23 19:41:42 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src51.ximg exists
[Mon Jan 23 19:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src51.csv
[Mon Jan 23 19:41:42 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src51_1.ximg exists
[Mon Jan 23 19:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src51.csv
[Mon Jan 23 19:41:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:41:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Mon Jan 23 19:41:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Mon Jan 23 19:41:45 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Mon Jan 23 23:29:14 2012] Source 54 is offset by -4.413704 and 0.301125 pixels which is larger than
2 X fitted extent = 0.947766 x 0.947766, not incorporating fit results
[Mon Jan 23 23:29:14 2012] Spatial fit model total counts = 437.000000, observed total counts = 437.000000
[Mon Jan 23 23:29:14 2012] Offset between fit and detection position for source 54 = 0.174482 pixels
[Mon Jan 23 23:29:14 2012] 411.984100 total counts/ 353.065000 bgd. counts: snr = 3.135659
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.174482 pixels
  Position = (333.0, 288.1) = 0 42 36.51 41 13 51.7
  Extent = 4.2 (2.8-5.8)", rotation angle = 0
  Source counts = 58.9 +/- 20.3
  Background counts = 353.1
  Rate = 0.005 +/- 0.002
[Mon Jan 23 23:29:14 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:14 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:29:14 2012] Source does appear to be extended
[Mon Jan 23 23:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:29:14 2012] Source is confused with source 73
[Tue Jan 24 04:14:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 04:14:38 2012] Initial guess for spatial extent in simple fitting = 4.18"
[Tue Jan 24 04:14:38 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.054
[Tue Jan 24 04:14:38 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 4.18"
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src50.ximg exists
[Tue Jan 24 09:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src50.csv
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src50_1.ximg exists
[Tue Jan 24 09:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src50.csv
[Tue Jan 24 09:42:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:42:47 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Tue Jan 24 09:42:47 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Tue Jan 24 09:42:47 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Tue Jan 24 13:18:33 2012] Spatial fit model total counts = 436.965000, observed total counts = 437.000000
[Tue Jan 24 13:18:33 2012] Offset between fit and detection position for source 54 = 0.080483 pixels
[Tue Jan 24 13:18:33 2012] 361.446100 total counts/ 316.395000 bgd. counts: snr = 2.532740
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.080483 pixels
  Position = (333.0, 288.1) = 0 42 36.52 41 13 52.0
  Extent = 3.3 (2.4-5.0)", rotation angle = 0
  Source counts = 45.1 +/- 19.0
  Background counts = 316.4
  Rate = 0.004 +/- 0.002
[Tue Jan 24 13:18:33 2012] Spatial fit model total counts = 789.953000, observed total counts = 790.000000
[Tue Jan 24 13:18:33 2012] Offset between fit and detection position for source 54 = 0.059987 pixels
[Tue Jan 24 13:18:33 2012] Warning, changing simple spatial fit ID from 50 to 55
[Tue Jan 24 13:18:33 2012] 782.373300 total counts/ 729.222000 bgd. counts: snr = 1.968267
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.059987 pixels
  Position = (333.1, 288.1) = 0 42 36.51 41 13 51.8
  Extent = 3.8" x 3.7", rotation angle = 2
  Source counts = 53.2 +/- 28.0
  Background counts = 729.2
  Rate = 0.004 +/- 0.002
[Tue Jan 24 13:18:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:33 2012] Assessing source extent using major
[Tue Jan 24 13:18:33 2012] Source does appear to be extended
[Tue Jan 24 13:18:33 2012] Computing asymmetry using major and minor axis, asym = 1.03
[Tue Jan 24 20:19:49 2012] XMMSAS src. selection expression = ellipse(28927.369000, 25014.322000, 228.738607, 222.089406, 2.339230, X, Y)
[Tue Jan 24 20:19:49 2012] Writing source region out to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src54_src.reg
[Tue Jan 24 20:19:49 2012] Extracting stamp from image fullrun_mos1_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (320, 275) - (346, 301)
[Tue Jan 24 20:19:49 2012] XMMSAS bgd. selection expression = annulus(28927.369000, 25014.322000, 381.231011, 762.462022, X, Y) && !ellipse(29943.887115, 24245.732269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28820.540000, 25196.460000, 1188.080034, 1188.080034, 0.000000, X, Y) && !ellipse(28026.138214, 24508.795227, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 20:19:49 2012] Writing fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src54.gif
[Tue Jan 24 20:36:29 2012] Mean detx,y = (-1610.45, 1774.51) 
[Tue Jan 24 20:36:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 20:36:43 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 20:36:43 2012] Setting source spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue Jan 24 20:36:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Tue Jan 24 22:42:17 2012] Not generating rmf since there are only 53 counts
[Tue Jan 24 22:42:17 2012] rmf not generated due to insufficient counts
[Wed Jan 25 01:27:31 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:31 2012] Error reading totcts from fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed Jan 25 01:27:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:32 2012] Using photon index=1.80, rate=0.00434, arf fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src54.arf
[Wed Jan 25 01:27:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:32 2012] Updating source flux to 6.5e-14
[Wed Jan 25 01:27:37 2012] Flag b found in src. 54 procflags, skipping spectral fitting
[Wed Jan 25 01:27:37 2012] Flag c found in src. 54 procflags, skipping spectral fitting
[Wed Jan 25 01:27:37 2012] Source 54 has fewer than 100.000000 counts, skipping spectral fitting