[Mon Jan 23 10:14:15 2012] Detection parameters:
  Position = (264.2, 391.8) = 0 43 3.08 41 21 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.2 +/- 13.2
  Background counts = 7.4
  Rate = 0.02 +/- 0.002

[Mon Jan 23 10:14:16 2012] Off-axis axis estimate = 7.21'
[Mon Jan 23 15:44:38 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:44:38 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Mon Jan 23 15:44:38 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.142
[Mon Jan 23 15:44:38 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 10.03"
[Mon Jan 23 19:41:42 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src41.ximg exists
[Mon Jan 23 19:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src41.csv
[Mon Jan 23 19:41:42 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src41_1.ximg exists
[Mon Jan 23 19:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src41.csv
[Mon Jan 23 19:41:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:41:44 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Mon Jan 23 19:41:44 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Mon Jan 23 19:41:44 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Mon Jan 23 23:29:14 2012] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 12.779913 pixels away
[Mon Jan 23 23:29:14 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:14 2012] Assessing source extent using major
[Mon Jan 23 23:29:14 2012] Source does appear to be extended
[Mon Jan 23 23:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 04:14:38 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 04:14:38 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Tue Jan 24 04:14:38 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.142
[Tue Jan 24 04:14:38 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 10.03"
[Tue Jan 24 09:42:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src40.ximg exists
[Tue Jan 24 09:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src40.csv
[Tue Jan 24 09:42:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue Jan 24 09:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src40.csv
[Tue Jan 24 09:42:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:42:47 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue Jan 24 09:42:47 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue Jan 24 09:42:47 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Tue Jan 24 13:18:33 2012] Source 40 is offset by 0.697938 and 9.052938 pixels which is larger than
2 X fitted extent = 1.153352 x 1.153352, not incorporating fit results
[Tue Jan 24 13:18:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:33 2012] Assessing source extent using major
[Tue Jan 24 13:18:33 2012] Source does appear to be extended
[Tue Jan 24 13:18:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 20:19:48 2012] XMMSAS src. selection expression = ellipse(22937.445343, 34040.371643, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 24 20:19:48 2012] Writing source region out to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src40_src.reg
[Tue Jan 24 20:19:48 2012] Extracting stamp from image fullrun_mos1_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (227, 354) - (302, 429)
[Tue Jan 24 20:19:48 2012] XMMSAS bgd. selection expression = annulus(22937.445343, 34040.371643, 1087.500000, 2175.000000, X, Y) && !ellipse(23747.556000, 31564.870400, 443.780813, 365.252811, 330.956000, X, Y)
[Tue Jan 24 20:19:48 2012] Writing fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src40.gif
[Tue Jan 24 20:32:39 2012] Mean detx,y = (5794.65, -6061.55) 
[Tue Jan 24 20:32:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 20:33:07 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 20:33:07 2012] Setting source spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Jan 24 20:33:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Tue Jan 24 22:38:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 24 22:38:14 2012] rmf not generated due to insufficient counts
[Wed Jan 25 01:27:31 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:31 2012] Error reading totcts from fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed Jan 25 01:27:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:32 2012] Using photon index=1.80, rate=0.0151, arf fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src40.arf
[Wed Jan 25 01:27:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:32 2012] Updating source flux to 2.3e-13
[Wed Jan 25 01:27:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting