[Mon Jan 23 10:14:15 2012] Detection parameters:
  Position = (396.7, 345.9) = 0 42 11.94 41 17 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.2 +/- 17.9
  Background counts = 7.8
  Rate = 0.03 +/- 0.002

[Mon Jan 23 10:14:16 2012] Off-axis axis estimate = 7.91'
[Mon Jan 23 15:44:38 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:44:38 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Mon Jan 23 15:44:38 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.750
[Mon Jan 23 15:44:38 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 10.38"
[Mon Jan 23 19:41:42 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src30.ximg exists
[Mon Jan 23 19:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src30.csv
[Mon Jan 23 19:41:42 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon Jan 23 19:41:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src30.csv
[Mon Jan 23 19:41:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:41:44 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon Jan 23 19:41:44 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Jan 23 19:41:44 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Mon Jan 23 23:29:14 2012] Warning, spatial fit 30 centroid is now closest to src. 7
[Mon Jan 23 23:29:14 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:14 2012] Assessing source extent using major
[Mon Jan 23 23:29:14 2012] Source does appear to be extended
[Mon Jan 23 23:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 04:14:38 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 04:14:38 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Tue Jan 24 04:14:38 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.750
[Tue Jan 24 04:14:38 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 10.38"
[Tue Jan 24 09:42:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src29.ximg exists
[Tue Jan 24 09:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src29.csv
[Tue Jan 24 09:42:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Jan 24 09:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src29.csv
[Tue Jan 24 09:42:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Jan 24 09:42:46 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Tue Jan 24 13:18:33 2012] Warning, spatial fit 29 centroid is now closest to src. 48
[Tue Jan 24 13:18:33 2012] Source 29 is offset by 2.390721 and -7.825322 pixels which is larger than
2 X fitted extent = 1.215159 x 1.215159, not incorporating fit results
[Tue Jan 24 13:18:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:33 2012] Assessing source extent using major
[Tue Jan 24 13:18:33 2012] Source does appear to be extended
[Tue Jan 24 13:18:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 20:19:48 2012] XMMSAS src. selection expression = ellipse(34461.740723, 30044.449005, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 24 20:19:48 2012] Writing source region out to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src29_src.reg
[Tue Jan 24 20:19:48 2012] Extracting stamp from image fullrun_mos1_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (359, 308) - (434, 383)
[Tue Jan 24 20:19:48 2012] XMMSAS bgd. selection expression = annulus(34461.740723, 30044.449005, 1087.500000, 2175.000000, X, Y) && !ellipse(34225.194900, 30713.193600, 357.037610, 357.037610, 0.000000, X, Y) && !ellipse(35443.883320, 30297.114160, 416.380812, 416.380812, 0.000000, X, Y) && !ellipse(32362.778107, 27557.079498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33672.371400, 29190.441400, 440.722413, 440.722413, 0.000000, X, Y) && !ellipse(35076.948181, 29782.134766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33728.809265, 33025.428284, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 20:19:48 2012] Writing fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src29.gif
[Tue Jan 24 20:29:14 2012] Mean detx,y = (4693.37, 5906.00) 
[Tue Jan 24 20:29:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 20:29:40 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 20:29:40 2012] Setting source spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jan 24 20:29:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Jan 24 22:19:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 24 22:19:42 2012] rmf not generated due to insufficient counts
[Wed Jan 25 01:27:31 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:31 2012] Error reading totcts from fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jan 25 01:27:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:32 2012] Using photon index=1.80, rate=0.0264, arf fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src29.arf
[Wed Jan 25 01:27:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:32 2012] Updating source flux to 3.8e-13
[Wed Jan 25 01:27:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting