[Mon Jan 23 10:14:15 2012] Detection parameters:
  Position = (312.3, 321.0) = 0 42 44.52 41 16 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1390.0 +/- 48.8
  Background counts = 29.6
  Rate = 0.1 +/- 0.004

[Mon Jan 23 10:14:16 2012] Off-axis axis estimate = 1.92'
[Mon Jan 23 15:44:38 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:44:38 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Mon Jan 23 15:44:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Mon Jan 23 15:44:38 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.39"
[Mon Jan 23 19:41:41 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jan 23 19:41:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src5.csv
[Mon Jan 23 19:41:41 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jan 23 19:41:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src5.csv
[Mon Jan 23 19:41:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:41:43 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jan 23 19:41:43 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jan 23 19:41:43 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Jan 23 23:29:14 2012] Spatial fit model total counts = 5089.070000, observed total counts = 5102.000000
[Mon Jan 23 23:29:14 2012] Offset between fit and detection position for source 2 = 6.445929 pixels
[Mon Jan 23 23:29:14 2012] 5166.540000 total counts/ 2688.750000 bgd. counts: snr = 47.784746
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 6.445929 pixels
  Position = (306.4, 323.5) = 0 42 46.81 41 16 26.1
  Extent = 12.9 (12.9-12.9)", rotation angle = 0
  Source counts = 2477.8 +/- 71.9
  Background counts = 2688.8
  Rate = 0.2 +/- 0.006
[Mon Jan 23 23:29:14 2012] Spatial fit model total counts = 1216.330000, observed total counts = 1215.000000
[Mon Jan 23 23:29:14 2012] Offset between fit and detection position for source 2 = 4.782567 pixels
[Mon Jan 23 23:29:14 2012] Warning, changing simple spatial fit ID from 5 to 64
[Mon Jan 23 23:29:14 2012] 1109.350000 total counts/ 882.199000 bgd. counts: snr = 7.647709
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.782567 pixels
  Position = (302.7, 326.7) = 0 42 48.20 41 16 39.7
  Extent = 14.6 (14.6-29.3)", rotation angle = 0
  Source counts = 227.2 +/- 33.3
  Background counts = 882.2
  Rate = 0.02 +/- 0.003
[Mon Jan 23 23:29:14 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:14 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:29:14 2012] Source does appear to be extended
[Mon Jan 23 23:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:29:14 2012] Source is confused with source 6
[Tue Jan 24 04:14:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 04:14:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 24 04:14:38 2012] Initial guess for spatial extent in simple fitting = 14.63"
[Tue Jan 24 04:14:38 2012] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.072
[Tue Jan 24 04:14:38 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.63"
[Tue Jan 24 09:42:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jan 24 09:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src5.csv
[Tue Jan 24 09:42:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jan 24 09:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src5.csv
[Tue Jan 24 09:42:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jan 24 09:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jan 24 09:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jan 24 09:42:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 13:18:33 2012] Warning, spatial fit 5 centroid is now closest to src. 49
[Tue Jan 24 13:18:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:33 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:33 2012] Source does appear to be extended
[Tue Jan 24 13:18:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 20:19:47 2012] XMMSAS src. selection expression = ellipse(26288.810000, 28371.122000, 877.968025, 877.968025, 0.000000, X, Y)
[Tue Jan 24 20:19:47 2012] Writing source region out to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src2_src.reg
[Tue Jan 24 20:19:47 2012] Extracting stamp from image fullrun_mos1_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (252, 276) - (353, 377)
[Tue Jan 24 20:19:47 2012] XMMSAS bgd. selection expression = annulus(26288.810000, 28371.122000, 1463.280042, 2926.560084, X, Y) && !ellipse(28495.001180, 27654.753800, 426.515212, 426.515212, 0.000000, X, Y) && !ellipse(26588.102820, 28088.507600, 552.374416, 552.374416, 0.000000, X, Y) && !ellipse(26286.144000, 26824.416000, 416.496812, 416.496812, 0.000000, X, Y) && !ellipse(25357.659340, 31075.844800, 407.939212, 407.939212, 0.000000, X, Y) && !ellipse(25118.190000, 27505.860000, 1170.624034, 626.763218, 59.738000, X, Y) && !ellipse(28101.568000, 28305.368000, 1291.456037, 794.352023, 3.959280, X, Y) && !ellipse(25328.588000, 27181.044000, 222.110406, 222.110406, 0.000000, X, Y) && !ellipse(23747.556000, 31564.870400, 443.780813, 365.252811, 330.956000, X, Y) && !ellipse(22994.474100, 26855.715600, 481.793614, 350.445610, 77.794500, X, Y) && !ellipse(23693.970960, 27689.556600, 420.283212, 326.573609, 91.712200, X, Y) && !ellipse(27638.281600, 26075.514400, 359.849610, 219.457606, 121.422600, X, Y) && !ellipse(29552.703064, 27964.095490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24381.991028, 30814.455292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26107.053833, 30288.103699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28518.194794, 28877.757446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24030.430634, 26999.706543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27025.078320, 25347.048200, 344.958410, 344.958410, 0.000000, X, Y) && !ellipse(28820.540000, 25196.460000, 1188.080034, 1188.080034, 0.000000, X, Y) && !ellipse(25765.595825, 28040.969208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26886.042084, 26236.011261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.576721, 28796.749847, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 20:19:47 2012] Writing fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src2.gif
[Tue Jan 24 20:23:10 2012] Mean detx,y = (903.53, -1272.83) 
[Tue Jan 24 20:23:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 20:23:21 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 20:23:21 2012] Setting source spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan 24 20:23:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jan 25 01:27:31 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:31 2012] Error reading totcts from fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jan 25 01:27:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:32 2012] Using photon index=1.80, rate=0.0186, arf fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src2.arf
[Wed Jan 25 01:27:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:32 2012] Updating source flux to 1.8e-13
[Wed Jan 25 01:27:37 2012] Flag c found in src. 2 procflags, skipping spectral fitting