[Mon Jan 23 10:14:15 2012] Detection parameters:
  Position = (318.8, 319.0) = 0 42 41.98 41 16 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1047.0 +/- 43.2
  Background counts = 28.6
  Rate = 0.09 +/- 0.004

[Mon Jan 23 10:14:16 2012] Off-axis axis estimate = 2.10'
[Mon Jan 23 15:44:38 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:44:38 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Mon Jan 23 15:44:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.812
[Mon Jan 23 15:44:38 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.48"
[Mon Jan 23 19:41:42 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src10.ximg exists
[Mon Jan 23 19:41:42 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Jan 23 19:41:42 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_src10 appears to have run properly
[Mon Jan 23 19:41:43 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Jan 23 19:41:43 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jan 23 19:41:43 2012] Fit fullrun_mos1_xmm0112570601_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Jan 23 23:29:14 2012] Source 12 is offset by -7.030584 and 0.802541 pixels which is larger than
2 X fitted extent = 2.051504 x 4.552331, not incorporating fit results
[Mon Jan 23 23:29:14 2012] Spatial fit model total counts = 728.801000, observed total counts = 727.000000
[Mon Jan 23 23:29:14 2012] Offset between fit and detection position for source 12 = 7.778200 pixels
[Mon Jan 23 23:29:14 2012] Warning, changing simple spatial fit ID from 10 to 53
[Mon Jan 23 23:29:14 2012] 691.927000 total counts/ 562.698000 bgd. counts: snr = 5.447814
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 7.778200 pixels
  Position = (323.0, 325.6) = 0 42 40.38 41 16 34.9
  Extent = 16.1 (16.1-32.3)", rotation angle = 0
  Source counts = 129.2 +/- 26.3
  Background counts = 562.7
  Rate = 0.01 +/- 0.002
[Mon Jan 23 23:29:14 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 23:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 23:29:14 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 23:29:14 2012] Source does appear to be extended
[Mon Jan 23 23:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 23:29:14 2012] Source is confused with source 1
[Tue Jan 24 04:14:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 04:14:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 24 04:14:38 2012] Initial guess for spatial extent in simple fitting = 16.14"
[Tue Jan 24 04:14:38 2012] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.015
[Tue Jan 24 04:14:38 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 16.14"
[Tue Jan 24 09:42:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jan 24 09:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src10.csv
[Tue Jan 24 09:42:45 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jan 24 09:42:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src10.csv
[Tue Jan 24 09:42:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jan 24 09:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jan 24 09:42:46 2012] fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jan 24 09:42:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jan 24 09:42:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570601_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 13:18:33 2012] Source 12 is offset by -4.980368 and 5.768529 pixels which is larger than
2 X fitted extent = 1.885329 x 3.294179, not incorporating fit results
[Tue Jan 24 13:18:33 2012] Spatial fit model total counts = 729.771000, observed total counts = 727.000000
[Tue Jan 24 13:18:33 2012] Offset between fit and detection position for source 12 = 0.655222 pixels
[Tue Jan 24 13:18:33 2012] Warning, changing simple spatial fit ID from 10 to 52
[Tue Jan 24 13:18:33 2012] 671.019000 total counts/ 527.477000 bgd. counts: snr = 6.249960
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.655222 pixels
  Position = (323.6, 325.9) = 0 42 40.16 41 16 36.4
  Extent = 16.1 (16.1-32.3)" x 9.9 (7.0-14.2)", rotation angle = 4 (336-31) degrees
  Source counts = 143.5 +/- 25.9
  Background counts = 527.5
  Rate = 0.01 +/- 0.002
[Tue Jan 24 13:18:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:18:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:18:33 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:18:33 2012] Source does appear to be extended
[Tue Jan 24 13:18:33 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Tue Jan 24 20:19:48 2012] XMMSAS src. selection expression = ellipse(28101.568000, 28305.368000, 968.592028, 595.764017, 3.959280, X, Y)
[Tue Jan 24 20:19:48 2012] Writing source region out to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src12_src.reg
[Tue Jan 24 20:19:48 2012] Extracting stamp from image fullrun_mos1_xmm0112570601_pi300-10000_cl_sm2.00.img.gz, (268, 270) - (379, 382)
[Tue Jan 24 20:19:48 2012] XMMSAS bgd. selection expression = annulus(28101.568000, 28305.368000, 1614.320046, 3228.640093, X, Y) && !ellipse(28495.001180, 27654.753800, 426.515212, 426.515212, 0.000000, X, Y) && !ellipse(26588.102820, 28088.507600, 552.374416, 552.374416, 0.000000, X, Y) && !ellipse(26286.144000, 26824.416000, 416.496812, 416.496812, 0.000000, X, Y) && !ellipse(26288.810000, 28371.122000, 1170.624034, 1170.624034, 0.000000, X, Y) && !ellipse(25357.659340, 31075.844800, 407.939212, 407.939212, 0.000000, X, Y) && !ellipse(25118.190000, 27505.860000, 1170.624034, 626.763218, 59.738000, X, Y) && !ellipse(30174.784200, 28010.756000, 369.424811, 369.424811, 0.000000, X, Y) && !ellipse(25328.588000, 27181.044000, 222.110406, 222.110406, 0.000000, X, Y) && !ellipse(29943.887115, 24245.732269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27638.281600, 26075.514400, 359.849610, 219.457606, 121.422600, X, Y) && !ellipse(29552.703064, 27964.095490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32238.936000, 24660.544000, 1412.872041, 176.608805, 11.466000, X, Y) && !ellipse(31341.446747, 31465.173767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24381.991028, 30814.455292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26107.053833, 30288.103699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28927.369000, 25014.322000, 304.984809, 296.119209, 2.339230, X, Y) && !ellipse(28518.194794, 28877.757446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24030.430634, 26999.706543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27025.078320, 25347.048200, 344.958410, 344.958410, 0.000000, X, Y) && !ellipse(28820.540000, 25196.460000, 1188.080034, 1188.080034, 0.000000, X, Y) && !ellipse(32149.299000, 25519.175000, 857.520025, 857.520025, 0.000000, X, Y) && !ellipse(28026.138214, 24508.795227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31581.437500, 24854.164093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25765.595825, 28040.969208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26886.042084, 26236.011261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.576721, 28796.749847, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 20:19:48 2012] Writing fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src12.gif
[Tue Jan 24 20:24:12 2012] Mean detx,y = (1161.14, 227.63) 
[Tue Jan 24 20:24:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 20:24:25 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 20:24:26 2012] Setting source spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jan 24 20:24:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Jan 25 01:27:31 2012] Updating aperture counts using extracted products
[Wed Jan 25 01:27:31 2012] Error reading totcts from fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jan 25 01:27:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 01:27:32 2012] Using photon index=1.80, rate=0.0117, arf fullrun_mos1_xmm0112570601_pi300-10000_pass1_cl_src12.arf
[Wed Jan 25 01:27:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 01:27:32 2012] Updating source flux to 1.2e-13
[Wed Jan 25 01:27:37 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Wed Jan 25 01:27:37 2012] Flag c found in src. 12 procflags, skipping spectral fitting