[Sat Jan 28 21:46:38 2012] Detection parameters:
  Position = (268.4, 264.3) = 0 42 47.82 41 14 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.3 +/- 21.7
  Background counts = 206.2
  Rate = 0.008 +/- 0.001

[Sat Jan 28 21:46:39 2012] Off-axis axis estimate = 3.30'
[Sat Jan 28 21:47:41 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:41 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Sat Jan 28 21:47:41 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.765
[Sat Jan 28 21:47:41 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 8.08"
[Sat Jan 28 21:47:43 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src75.ximg exists
[Sat Jan 28 21:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src75.csv
[Sat Jan 28 21:47:43 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src75_1.ximg exists
[Sat Jan 28 21:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src75.csv
[Sat Jan 28 21:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:45 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Sat Jan 28 21:47:45 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Sat Jan 28 21:47:45 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Sat Jan 28 21:48:19 2012] Warning, spatial fit 75 centroid is now closest to src. 97
[Sat Jan 28 21:48:19 2012] Spatial fit model total counts = 2163.900000, observed total counts = 2160.000000
[Sat Jan 28 21:48:19 2012] Offset between fit and detection position for source 87 = 3.250627 pixels
[Sat Jan 28 21:48:19 2012] Warning, changing simple spatial fit ID from 75 to 84
[Sat Jan 28 21:48:19 2012] 1948.339000 total counts/ 1315.510000 bgd. counts: snr = 17.447745
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 3.250627 pixels
  Position = (265.2, 265.0) = 0 42 49.04 41 14 33.1
  Extent = 16.5 (15.3-33.0)" x 13.4 (10.9-15.5)", rotation angle = 117 (198-90) degrees
  Source counts = 632.8 +/- 44.1
  Background counts = 1315.5
  Rate = 0.02 +/- 0.002
[Sat Jan 28 21:48:19 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:19 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:48:19 2012] Source does appear to be extended
[Sat Jan 28 21:48:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Sat Jan 28 21:48:19 2012] Source is confused with source 96
[Sat Jan 28 21:48:19 2012] Source is confused with source 97
[Sat Jan 28 21:49:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:33 2012] Initial guess for spatial extent in simple fitting = 14.94"
[Sat Jan 28 21:49:33 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.033
[Sat Jan 28 21:49:33 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 14.94"
[Sat Jan 28 21:49:35 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src66.ximg exists
[Sat Jan 28 21:49:35 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src66_1.ximg exists
[Sat Jan 28 21:49:35 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src66 appears to have run properly
[Sat Jan 28 21:49:37 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Sat Jan 28 21:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src66.csv
[Sat Jan 28 21:49:37 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Sat Jan 28 21:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src66.csv
[Sat Jan 28 21:49:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:50:07 2012] Warning, spatial fit 66 centroid is now closest to src. 96
[Sat Jan 28 21:50:07 2012] Spatial fit model total counts = 2164.060000, observed total counts = 2160.000000
[Sat Jan 28 21:50:07 2012] Offset between fit and detection position for source 87 = 0.393719 pixels
[Sat Jan 28 21:50:07 2012] Warning, changing simple spatial fit ID from 66 to 75
[Sat Jan 28 21:50:07 2012] 1997.590000 total counts/ 1558.780000 bgd. counts: snr = 11.114351
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 0.393719 pixels
  Position = (265.0, 264.7) = 0 42 49.14 41 14 31.8
  Extent = 13.5 (10.4-16.5)", rotation angle = 0
  Source counts = 438.8 +/- 44.7
  Background counts = 1558.8
  Rate = 0.02 +/- 0.002
[Sat Jan 28 21:50:08 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:08 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:08 2012] Source does appear to be extended
[Sat Jan 28 21:50:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:51:09 2012] XMMSAS src. selection expression = ellipse(23002.759600, 22982.188000, 808.794023, 808.794023, 0.000000, X, Y)
[Sat Jan 28 21:51:09 2012] Not overwriting source region fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_src.reg
[Sat Jan 28 21:51:09 2012] Extracting stamp from image fullrun_pn_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (218, 218) - (311, 311)
[Sat Jan 28 21:51:09 2012] XMMSAS bgd. selection expression = annulus(23002.759600, 22982.188000, 1347.990039, 2695.980078, X, Y) && !ellipse(25429.939760, 24828.759000, 1353.144039, 1353.144039, 0.000000, X, Y) && !ellipse(21218.216965, 25973.304077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19833.811676, 25693.283447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22952.866000, 25610.302000, 6993.600201, 6993.600201, 0.000000, X, Y) && !ellipse(26487.968231, 25166.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23757.898000, 25189.499000, 3496.800101, 3496.800101, 0.000000, X, Y) && !ellipse(20631.148000, 24871.203800, 437.210413, 437.210413, 0.000000, X, Y) && !ellipse(21744.199146, 24823.931099, 360.756512, 356.672408, 89.246491, X, Y) && !ellipse(22296.569880, 24356.904600, 364.908011, 364.908011, 0.000000, X, Y) && !ellipse(23249.233780, 24115.059400, 491.987214, 491.987214, 0.000000, X, Y) && !ellipse(21527.788000, 23127.384000, 1323.776038, 1323.776038, 0.000000, X, Y) && !ellipse(20912.576630, 23904.826508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24187.752000, 25030.644200, 3414.768098, 3414.768098, 0.000000, X, Y) && !ellipse(19906.633200, 24067.510200, 479.218414, 479.218414, 0.000000, X, Y) && !ellipse(25228.292200, 22933.862600, 377.949611, 377.949611, 0.000000, X, Y) && !ellipse(25129.695068, 22329.637451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24606.808000, 23301.502000, 457.559213, 457.559213, 0.000000, X, Y) && !ellipse(23976.422028, 22565.566010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23159.044708, 22523.616547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23105.711800, 23606.038000, 1181.616034, 1181.616034, 0.000000, X, Y) && !ellipse(20396.577619, 22248.900200, 706.284020, 706.284020, 0.000000, X, Y) && !ellipse(25907.053131, 22160.664749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24980.519800, 21760.850000, 374.508811, 374.508811, 0.000000, X, Y) && !ellipse(24359.602000, 21558.061600, 382.263211, 382.263211, 0.000000, X, Y) && !ellipse(23474.687866, 19885.556870, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 21:51:09 2012] Writing fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87.gif
[Sat Jan 28 21:51:21 2012] ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_src.evt and ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_bgd.evt exist, delete to re-create
[Sat Jan 28 21:51:21 2012] Mean detx,y = (1275.70, -1841.47) 
[Sat Jan 28 21:51:21 2012] ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_src.img and ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_bgd.img exist, delete to re-create
[Sat Jan 28 21:51:21 2012] ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_bgd.pi exist, delete to re-create
[Sat Jan 28 21:51:21 2012] Setting source spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Sat Jan 28 21:51:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Sat Jan 28 21:51:21 2012] ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_bgd.lc exist, delete to re-create
[Sun Jan 29 17:27:45 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:45 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Sun Jan 29 17:27:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:47 2012] Using photon index=1.80, rate=0.0166, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87.arf
[Sun Jan 29 17:27:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:47 2012] Updating source flux to 4.2e-14
[Sun Jan 29 17:41:37 2012] Flag c found in src. 87 procflags, skipping spectral fitting
[Thu Feb  2 08:42:56 2012] fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87.rmf exists, delete to re-create
[Thu Feb  2 08:42:56 2012] fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87.arf exists, delete to re-create
[Thu Feb  2 08:43:35 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:35 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Thu Feb  2 08:43:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:37 2012] Using photon index=1.80, rate=0.0166, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src87.arf
[Thu Feb  2 08:43:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:37 2012] Updating source flux to 4.2e-14
[Thu Feb  2 08:43:53 2012] Flag c found in src. 87 procflags, skipping spectral fitting