[Sat Jan 28 21:46:37 2012] Detection parameters:
  Position = (240.9, 275.3) = 0 42 58.41 41 15 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.6 +/- 20.6
  Background counts = 163.2
  Rate = 0.009 +/- 0.001

[Sat Jan 28 21:46:39 2012] Off-axis axis estimate = 4.49'
[Sat Jan 28 21:47:41 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:41 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Sat Jan 28 21:47:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.643
[Sat Jan 28 21:47:41 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 8.68"
[Sat Jan 28 21:47:43 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src68.ximg exists
[Sat Jan 28 21:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src68.csv
[Sat Jan 28 21:47:43 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src68_1.ximg exists
[Sat Jan 28 21:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src68.csv
[Sat Jan 28 21:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:45 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Sat Jan 28 21:47:45 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Sat Jan 28 21:47:45 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Sat Jan 28 21:48:19 2012] Source 78 is offset by -0.464600 and -2.152150 pixels which is larger than
2 X fitted extent = 1.442566 x 1.442566, not incorporating fit results
[Sat Jan 28 21:48:19 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:19 2012] Assessing source extent using major
[Sat Jan 28 21:48:19 2012] Source does appear to be extended
[Sat Jan 28 21:48:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:48:19 2012] Source is confused with source 77
[Sat Jan 28 21:49:33 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:33 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Sat Jan 28 21:49:33 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.643
[Sat Jan 28 21:49:33 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 8.68"
[Sat Jan 28 21:49:34 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src59.ximg exists
[Sat Jan 28 21:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src59.csv
[Sat Jan 28 21:49:34 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src59_1.ximg exists
[Sat Jan 28 21:49:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src59.csv
[Sat Jan 28 21:49:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:36 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sat Jan 28 21:49:36 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sat Jan 28 21:49:36 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Sat Jan 28 21:50:07 2012] Source 78 is offset by -4.950590 and -6.556431 pixels which is larger than
2 X fitted extent = 0.515393 x 0.515393, not incorporating fit results
[Sat Jan 28 21:50:07 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 14.684362 pixels away
[Sat Jan 28 21:50:07 2012] Source 78 is offset by -0.473407 and -2.161109 pixels which is larger than
2 X fitted extent = 1.425513 x 1.425513, not incorporating fit results
[Sat Jan 28 21:50:07 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:07 2012] Assessing source extent using major
[Sat Jan 28 21:50:07 2012] Source does appear to be extended
[Sat Jan 28 21:50:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:51:08 2012] XMMSAS src. selection expression = ellipse(20912.576630, 23904.826508, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 21:51:08 2012] Not overwriting source region fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_src.reg
[Sat Jan 28 21:51:08 2012] Extracting stamp from image fullrun_pn_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (203, 238) - (278, 313)
[Sat Jan 28 21:51:09 2012] XMMSAS bgd. selection expression = annulus(20912.576630, 23904.826508, 1087.500000, 2175.000000, X, Y) && !ellipse(22871.327148, 26740.557098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22326.268219, 26654.027039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21218.216965, 25973.304077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19833.811676, 25693.283447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22952.866000, 25610.302000, 6993.600201, 6993.600201, 0.000000, X, Y) && !ellipse(23757.898000, 25189.499000, 3496.800101, 3496.800101, 0.000000, X, Y) && !ellipse(20631.148000, 24871.203800, 437.210413, 437.210413, 0.000000, X, Y) && !ellipse(21744.199146, 24823.931099, 360.756512, 356.672408, 89.246491, X, Y) && !ellipse(22296.569880, 24356.904600, 364.908011, 364.908011, 0.000000, X, Y) && !ellipse(23249.233780, 24115.059400, 491.987214, 491.987214, 0.000000, X, Y) && !ellipse(21527.788000, 23127.384000, 1323.776038, 1323.776038, 0.000000, X, Y) && !ellipse(24187.752000, 25030.644200, 3414.768098, 3414.768098, 0.000000, X, Y) && !ellipse(19906.633200, 24067.510200, 479.218414, 479.218414, 0.000000, X, Y) && !ellipse(23002.759600, 22982.188000, 1078.392031, 1078.392031, 0.000000, X, Y) && !ellipse(23159.044708, 22523.616547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23105.711800, 23606.038000, 1181.616034, 1181.616034, 0.000000, X, Y) && !ellipse(20396.577619, 22248.900200, 706.284020, 706.284020, 0.000000, X, Y) && !ellipse(18648.448624, 20929.250214, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 21:51:09 2012] Writing fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78.gif
[Sat Jan 28 21:51:20 2012] ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_src.evt and ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_bgd.evt exist, delete to re-create
[Sat Jan 28 21:51:20 2012] Mean detx,y = (3526.63, -1536.04) 
[Sat Jan 28 21:51:20 2012] ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_src.img and ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_bgd.img exist, delete to re-create
[Sat Jan 28 21:51:20 2012] ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_bgd.pi exist, delete to re-create
[Sat Jan 28 21:51:20 2012] Setting source spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sat Jan 28 21:51:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Sat Jan 28 21:51:20 2012] ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_bgd.lc exist, delete to re-create
[Sat Jan 28 22:34:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 22:34:50 2012] rmf not generated due to insufficient counts
[Sun Jan 29 17:27:45 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:45 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sun Jan 29 17:27:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:47 2012] Using photon index=1.80, rate=0.00883, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78.arf
[Sun Jan 29 17:27:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:47 2012] Updating source flux to 4e-14
[Sun Jan 29 17:41:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb  2 08:42:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb  2 08:42:56 2012] rmf not generated due to insufficient counts
[Thu Feb  2 08:42:56 2012] fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78.arf exists, delete to re-create
[Thu Feb  2 08:43:35 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:35 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Thu Feb  2 08:43:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:37 2012] Using photon index=1.80, rate=0.00883, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src78.arf
[Thu Feb  2 08:43:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:37 2012] Updating source flux to 4e-14
[Thu Feb  2 08:43:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting