[Sat Jan 28 21:46:37 2012] Detection parameters:
  Position = (276.5, 307.9) = 0 42 44.70 41 17 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 736.8 +/- 40.8
  Background counts = 194.4
  Rate = 0.03 +/- 0.002

[Sat Jan 28 21:46:39 2012] Off-axis axis estimate = 1.73'
[Sat Jan 28 21:47:41 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:41 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jan 28 21:47:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sat Jan 28 21:47:41 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 7.29"
[Sat Jan 28 21:47:43 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src51.ximg exists
[Sat Jan 28 21:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src51.csv
[Sat Jan 28 21:47:43 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src51_1.ximg exists
[Sat Jan 28 21:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src51.csv
[Sat Jan 28 21:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:45 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sat Jan 28 21:47:45 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sat Jan 28 21:47:45 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sat Jan 28 21:48:19 2012] Spatial fit model total counts = 3004.840000, observed total counts = 3008.000000
[Sat Jan 28 21:48:19 2012] Offset between fit and detection position for source 56 = 0.911769 pixels
[Sat Jan 28 21:48:19 2012] Warning, changing simple spatial fit ID from 51 to 39
[Sat Jan 28 21:48:19 2012] 2879.659000 total counts/ 2627.500000 bgd. counts: snr = 4.919298
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.911769 pixels
  Position = (277.4, 308.1) = 0 42 44.36 41 17 40.6
  Extent = 5.2 (4.5-6.3)", rotation angle = 0
  Source counts = 252.2 +/- 53.7
  Background counts = 2627.5
  Rate = 0.01 +/- 0.002
[Sat Jan 28 21:48:19 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:19 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:48:19 2012] Source does appear to be extended
[Sat Jan 28 21:48:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:33 2012] Initial guess for spatial extent in simple fitting = 5.24"
[Sat Jan 28 21:49:33 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.032
[Sat Jan 28 21:49:33 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 5.24"
[Sat Jan 28 21:49:34 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src44.ximg exists
[Sat Jan 28 21:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src44.csv
[Sat Jan 28 21:49:34 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src44_1.ximg exists
[Sat Jan 28 21:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src44.csv
[Sat Jan 28 21:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:36 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Sat Jan 28 21:49:36 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Sat Jan 28 21:49:36 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Sat Jan 28 21:50:07 2012] Spatial fit model total counts = 3012.330000, observed total counts = 3008.000000
[Sat Jan 28 21:50:07 2012] Offset between fit and detection position for source 56 = 0.026437 pixels
[Sat Jan 28 21:50:07 2012] Warning, changing simple spatial fit ID from 44 to 32
[Sat Jan 28 21:50:07 2012] 2896.175000 total counts/ 2644.250000 bgd. counts: snr = 4.899142
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.026437 pixels
  Position = (277.4, 308.1) = 0 42 44.36 41 17 40.5
  Extent = 6.5 (5.2-8.5)" x 4.5 (3.6-5.7)", rotation angle = 0 (359-0) degrees
  Source counts = 251.9 +/- 53.8
  Background counts = 2644.2
  Rate = 0.01 +/- 0.002
[Sat Jan 28 21:50:07 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:07 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:07 2012] Source does appear to be extended
[Sat Jan 28 21:50:07 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Sat Jan 28 21:50:08 2012] Source is confused with source 66
[Sat Jan 28 21:51:07 2012] XMMSAS src. selection expression = ellipse(24084.012000, 26756.060000, 388.877411, 272.536808, 0.000000, X, Y)
[Sat Jan 28 21:51:07 2012] Not overwriting source region fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_src.reg
[Sat Jan 28 21:51:07 2012] Extracting stamp from image fullrun_pn_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (255, 286) - (300, 330)
[Sat Jan 28 21:51:07 2012] XMMSAS bgd. selection expression = annulus(24084.012000, 26756.060000, 648.129019, 1296.258037, X, Y) && !ellipse(25429.939760, 24828.759000, 1353.144039, 1353.144039, 0.000000, X, Y) && !ellipse(26240.678802, 28652.985321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24633.565674, 27610.254425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25068.268000, 28060.134000, 444.192013, 444.192013, 0.000000, X, Y) && !ellipse(22311.639008, 28222.275848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24656.582123, 27252.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23039.687000, 27477.224200, 385.168011, 385.168011, 0.000000, X, Y) && !ellipse(22871.327148, 26740.557098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24853.075531, 26739.821655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22326.268219, 26654.027039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22952.866000, 25610.302000, 6993.600201, 6993.600201, 0.000000, X, Y) && !ellipse(23757.898000, 25189.499000, 3496.800101, 3496.800101, 0.000000, X, Y) && !ellipse(24187.752000, 25030.644200, 3414.768098, 3414.768098, 0.000000, X, Y)
[Sat Jan 28 21:51:07 2012] Writing fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56.gif
[Sat Jan 28 21:51:16 2012] ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_src.evt and ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_bgd.evt exist, delete to re-create
[Sat Jan 28 21:51:16 2012] Mean detx,y = (931.00, 1909.14) 
[Sat Jan 28 21:51:16 2012] ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_src.img and ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_bgd.img exist, delete to re-create
[Sat Jan 28 21:51:16 2012] ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_bgd.pi exist, delete to re-create
[Sat Jan 28 21:51:16 2012] Setting source spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat Jan 28 21:51:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sat Jan 28 21:51:16 2012] ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_bgd.lc exist, delete to re-create
[Sat Jan 28 22:00:58 2012] fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56.rmf exists, delete to re-create
[Sun Jan 29 17:27:44 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:44 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sun Jan 29 17:27:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:47 2012] Using photon index=1.80, rate=0.0095, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56.arf
[Sun Jan 29 17:27:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:47 2012] Updating source flux to 3.2e-14
[Sun Jan 29 17:41:37 2012] Flag c found in src. 56 procflags, skipping spectral fitting
[Thu Feb  2 08:43:34 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:34 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Thu Feb  2 08:43:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:37 2012] Using photon index=1.80, rate=0.0095, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src56.arf
[Thu Feb  2 08:43:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:37 2012] Updating source flux to 3.2e-14
[Thu Feb  2 08:43:53 2012] Flag c found in src. 56 procflags, skipping spectral fitting