[Sat Jan 28 21:46:37 2012] Detection parameters:
  Position = (361.5, 313.0) = 0 42 11.87 41 17 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.7 +/- 23.9
  Background counts = 69.2
  Rate = 0.01 +/- 0.001

[Sat Jan 28 21:46:39 2012] Off-axis axis estimate = 4.70'
[Sat Jan 28 21:47:41 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:41 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Sat Jan 28 21:47:41 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.986
[Sat Jan 28 21:47:41 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 8.78"
[Sat Jan 28 21:47:43 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src45.ximg exists
[Sat Jan 28 21:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src45.csv
[Sat Jan 28 21:47:43 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src45_1.ximg exists
[Sat Jan 28 21:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src45.csv
[Sat Jan 28 21:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:45 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sat Jan 28 21:47:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src45.csv
[Sat Jan 28 21:47:45 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Jan 28 21:47:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src45.csv
[Sat Jan 28 21:47:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:48:19 2012] Warning, spatial fit 45 centroid is now closest to src. 44
[Sat Jan 28 21:48:19 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:19 2012] Assessing source extent using major
[Sat Jan 28 21:48:19 2012] Source does appear to be extended
[Sat Jan 28 21:48:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:48:19 2012] Source is confused with source 63
[Sat Jan 28 21:49:33 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:33 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Sat Jan 28 21:49:33 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.986
[Sat Jan 28 21:49:33 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 8.78"
[Sat Jan 28 21:49:34 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src38.ximg exists
[Sat Jan 28 21:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src38.csv
[Sat Jan 28 21:49:34 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src38_1.ximg exists
[Sat Jan 28 21:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src38.csv
[Sat Jan 28 21:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:36 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sat Jan 28 21:49:36 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sat Jan 28 21:49:36 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Sat Jan 28 21:50:07 2012] Source 48 is offset by 2.697495 and -7.915700 pixels which is larger than
2 X fitted extent = 2.187812 x 2.187812, not incorporating fit results
[Sat Jan 28 21:50:07 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:07 2012] Assessing source extent using major
[Sat Jan 28 21:50:07 2012] Source does appear to be extended
[Sat Jan 28 21:50:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:51:06 2012] XMMSAS src. selection expression = ellipse(31404.732025, 27186.740082, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 21:51:06 2012] Not overwriting source region fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_src.reg
[Sat Jan 28 21:51:06 2012] Extracting stamp from image fullrun_pn_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (324, 276) - (399, 351)
[Sat Jan 28 21:51:06 2012] XMMSAS bgd. selection expression = annulus(31404.732025, 27186.740082, 1087.500000, 2175.000000, X, Y) && !ellipse(31160.438000, 27886.673400, 451.920013, 451.920013, 0.000000, X, Y) && !ellipse(32664.662000, 27554.474000, 787.035223, 787.035223, 0.000000, X, Y) && !ellipse(30720.204407, 27269.723022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32009.749481, 26863.179626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28602.590210, 25832.417603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31401.278000, 26459.116000, 1439.736041, 1439.736041, 0.000000, X, Y) && !ellipse(31437.096832, 25714.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22952.866000, 25610.302000, 6993.600201, 6993.600201, 0.000000, X, Y) && !ellipse(29287.734280, 24782.839800, 337.771210, 337.771210, 0.000000, X, Y)
[Sat Jan 28 21:51:06 2012] Writing fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48.gif
[Sat Jan 28 21:51:15 2012] ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_src.evt and ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_bgd.evt exist, delete to re-create
[Sat Jan 28 21:51:16 2012] Mean detx,y = (-6093.95, 4016.90) 
[Sat Jan 28 21:51:16 2012] ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_src.img and ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_bgd.img exist, delete to re-create
[Sat Jan 28 21:51:16 2012] ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_bgd.pi exist, delete to re-create
[Sat Jan 28 21:51:16 2012] Setting source spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sat Jan 28 21:51:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sat Jan 28 21:51:16 2012] ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_bgd.lc exist, delete to re-create
[Sat Jan 28 21:59:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 21:59:02 2012] rmf not generated due to insufficient counts
[Sun Jan 29 17:27:44 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:44 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Jan 29 17:27:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:46 2012] Using photon index=1.80, rate=0.0124, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48.arf
[Sun Jan 29 17:27:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:46 2012] Updating source flux to 4.9e-14
[Sun Jan 29 17:41:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb  2 08:43:34 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:34 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu Feb  2 08:43:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:37 2012] Using photon index=1.80, rate=0.0124, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src48.arf
[Thu Feb  2 08:43:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:37 2012] Updating source flux to 4.9e-14
[Thu Feb  2 08:43:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting