[Sat Jan 28 21:46:36 2012] Detection parameters:
  Position = (353.7, 314.0) = 0 42 14.91 41 18 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.4 +/- 18.4
  Background counts = 73.8
  Rate = 0.005 +/- 0.0009

[Sat Jan 28 21:46:39 2012] Off-axis axis estimate = 4.16'
[Sat Jan 28 21:47:41 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:41 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Sat Jan 28 21:47:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.829
[Sat Jan 28 21:47:41 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 8.51"
[Sat Jan 28 21:47:43 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src42.ximg exists
[Sat Jan 28 21:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src42.csv
[Sat Jan 28 21:47:43 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src42_1.ximg exists
[Sat Jan 28 21:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src42.csv
[Sat Jan 28 21:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:44 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sat Jan 28 21:47:44 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sat Jan 28 21:47:44 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sat Jan 28 21:47:44 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sat Jan 28 21:47:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:48:19 2012] Warning, spatial fit 42 centroid is now closest to src. 39
[Sat Jan 28 21:48:19 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 10.416484 pixels away
[Sat Jan 28 21:48:19 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:19 2012] Assessing source extent using major
[Sat Jan 28 21:48:19 2012] Source does appear to be extended
[Sat Jan 28 21:48:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:48:19 2012] Source is confused with source 63
[Sat Jan 28 21:49:33 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:33 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Sat Jan 28 21:49:33 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.829
[Sat Jan 28 21:49:33 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 8.51"
[Sat Jan 28 21:49:34 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src35.ximg exists
[Sat Jan 28 21:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src35.csv
[Sat Jan 28 21:49:34 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src35_1.ximg exists
[Sat Jan 28 21:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src35.csv
[Sat Jan 28 21:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:36 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sat Jan 28 21:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sat Jan 28 21:49:36 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Jan 28 21:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sat Jan 28 21:49:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:50:07 2012] Spatial fit model total counts = 2019.550000, observed total counts = 3597.000000
[Sat Jan 28 21:50:07 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jan 28 21:50:07 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 10.499277 pixels away
[Sat Jan 28 21:50:07 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:07 2012] Assessing source extent using major
[Sat Jan 28 21:50:07 2012] Source does appear to be extended
[Sat Jan 28 21:50:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:51:06 2012] XMMSAS src. selection expression = ellipse(30720.204407, 27269.723022, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jan 28 21:51:06 2012] Not overwriting source region fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_src.reg
[Sat Jan 28 21:51:06 2012] Extracting stamp from image fullrun_pn_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (316, 277) - (391, 352)
[Sat Jan 28 21:51:06 2012] XMMSAS bgd. selection expression = annulus(30720.204407, 27269.723022, 1087.500000, 2175.000000, X, Y) && !ellipse(28258.788200, 28654.431000, 447.636013, 447.636013, 0.000000, X, Y) && !ellipse(31160.438000, 27886.673400, 451.920013, 451.920013, 0.000000, X, Y) && !ellipse(32664.662000, 27554.474000, 787.035223, 787.035223, 0.000000, X, Y) && !ellipse(31404.732025, 27186.740082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32009.749481, 26863.179626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28602.590210, 25832.417603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31401.278000, 26459.116000, 1439.736041, 1439.736041, 0.000000, X, Y) && !ellipse(31437.096832, 25714.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22952.866000, 25610.302000, 6993.600201, 6993.600201, 0.000000, X, Y) && !ellipse(29287.734280, 24782.839800, 337.771210, 337.771210, 0.000000, X, Y) && !ellipse(28345.955078, 24511.925507, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 21:51:06 2012] Writing fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45.gif
[Sat Jan 28 21:51:15 2012] ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_src.evt and ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_bgd.evt exist, delete to re-create
[Sat Jan 28 21:51:15 2012] Mean detx,y = (-5627.08, 3926.90) 
[Sat Jan 28 21:51:15 2012] ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_src.img and ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_bgd.img exist, delete to re-create
[Sat Jan 28 21:51:15 2012] ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_bgd.pi exist, delete to re-create
[Sat Jan 28 21:51:15 2012] Setting source spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sat Jan 28 21:51:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sat Jan 28 21:51:15 2012] ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_bgd.lc exist, delete to re-create
[Sat Jan 28 21:58:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jan 28 21:58:41 2012] rmf not generated due to insufficient counts
[Sun Jan 29 17:27:44 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:44 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sun Jan 29 17:27:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:46 2012] Using photon index=1.80, rate=0.00511, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45.arf
[Sun Jan 29 17:27:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:46 2012] Updating source flux to 1.9e-14
[Sun Jan 29 17:41:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb  2 08:43:34 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:34 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Feb  2 08:43:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:37 2012] Using photon index=1.80, rate=0.00511, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src45.arf
[Thu Feb  2 08:43:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:37 2012] Updating source flux to 1.9e-14
[Thu Feb  2 08:43:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting