[Sat Jan 28 21:46:36 2012] Detection parameters:
  Position = (352.8, 347.2) = 0 42 15.21 41 20 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 322.5 +/- 25.2
  Background counts = 65.2
  Rate = 0.02 +/- 0.001

[Sat Jan 28 21:46:39 2012] Off-axis axis estimate = 5.30'
[Sat Jan 28 21:47:41 2012] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:41 2012] Initial guess for spatial extent in simple fitting = 9.08"
[Sat Jan 28 21:47:41 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.934
[Sat Jan 28 21:47:41 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 9.08"
[Sat Jan 28 21:47:42 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src22.ximg exists
[Sat Jan 28 21:47:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src22.csv
[Sat Jan 28 21:47:42 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src22_1.ximg exists
[Sat Jan 28 21:47:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src22.csv
[Sat Jan 28 21:47:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:44 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sat Jan 28 21:47:44 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sat Jan 28 21:47:44 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sat Jan 28 21:48:19 2012] Spatial fit model total counts = 639.401000, observed total counts = 640.000000
[Sat Jan 28 21:48:19 2012] Offset between fit and detection position for source 23 = 0.289964 pixels
[Sat Jan 28 21:48:19 2012] 636.181000 total counts/ 420.795000 bgd. counts: snr = 10.499828
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.289964 pixels
  Position = (352.6, 347.4) = 0 42 15.29 41 20 31.6
  Extent = 5.7 (5.0-6.5)", rotation angle = 0
  Source counts = 215.4 +/- 25.2
  Background counts = 420.8
  Rate = 0.008 +/- 0.001
[Sat Jan 28 21:48:19 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:19 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:48:19 2012] Source does appear to be extended
[Sat Jan 28 21:48:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:33 2012] Initial guess for spatial extent in simple fitting = 5.65"
[Sat Jan 28 21:49:33 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.695
[Sat Jan 28 21:49:33 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 5.65"
[Sat Jan 28 21:49:34 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src17.ximg exists
[Sat Jan 28 21:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src17.csv
[Sat Jan 28 21:49:34 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Jan 28 21:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src17.csv
[Sat Jan 28 21:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:36 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Jan 28 21:49:36 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Jan 28 21:49:36 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Jan 28 21:50:07 2012] Spatial fit model total counts = 632.418000, observed total counts = 634.000000
[Sat Jan 28 21:50:07 2012] Offset between fit and detection position for source 23 = 0.002281 pixels
[Sat Jan 28 21:50:07 2012] 629.690000 total counts/ 412.703000 bgd. counts: snr = 10.681073
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.002281 pixels
  Position = (352.6, 347.4) = 0 42 15.29 41 20 31.6
  Extent = 5.7 (5.0-6.5)", rotation angle = 0
  Source counts = 217.0 +/- 25.1
  Background counts = 412.7
  Rate = 0.008 +/- 0.0009
[Sat Jan 28 21:50:07 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:07 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:07 2012] Source does appear to be extended
[Sat Jan 28 21:50:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:51:05 2012] XMMSAS src. selection expression = ellipse(30631.814800, 30179.392000, 343.030810, 343.030810, 0.000000, X, Y)
[Sat Jan 28 21:51:05 2012] Not overwriting source region fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_src.reg
[Sat Jan 28 21:51:05 2012] Extracting stamp from image fullrun_pn_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (333, 328) - (372, 367)
[Sat Jan 28 21:51:06 2012] XMMSAS bgd. selection expression = annulus(30631.814800, 30179.392000, 571.718016, 1143.436033, X, Y) && !ellipse(32098.366394, 30514.784790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22952.866000, 25610.302000, 6993.600201, 6993.600201, 0.000000, X, Y)
[Sat Jan 28 21:51:06 2012] Writing fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23.gif
[Sat Jan 28 21:51:13 2012] ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Sat Jan 28 21:51:13 2012] Mean detx,y = (-4823.22, 6596.91) 
[Sat Jan 28 21:51:13 2012] ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_src.img and ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Sat Jan 28 21:51:13 2012] ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Sat Jan 28 21:51:13 2012] Setting source spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jan 28 21:51:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Jan 28 21:51:13 2012] ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Sat Jan 28 21:55:02 2012] fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23.rmf exists, delete to re-create
[Sun Jan 29 17:27:44 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:44 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Jan 29 17:27:46 2012] No arf file for this source, not re-computing flux
[Sun Jan 29 17:41:37 2012] Source 23 has no response, skipping
[Thu Feb  2 08:43:34 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:34 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Feb  2 08:43:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:36 2012] Using photon index=1.80, rate=0.00818, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src23.arf
[Thu Feb  2 08:43:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:36 2012] Updating source flux to 3.9e-14