[Sat Jan 28 21:46:38 2012] Detection parameters:
  Position = (353.8, 238.0) = 0 42 14.90 41 12 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2089.1 +/- 56.4
  Background counts = 77.4
  Rate = 0.1 +/- 0.003

[Sat Jan 28 21:46:39 2012] Off-axis axis estimate = 5.94'
[Sat Jan 28 21:47:41 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:41 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Sat Jan 28 21:47:41 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.059
[Sat Jan 28 21:47:41 2012] Giving source the simple spatial ID 98 for pass 0, mean size = 9.40"
[Sat Jan 28 21:47:44 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src98.ximg exists
[Sat Jan 28 21:47:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src98.csv
[Sat Jan 28 21:47:44 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src98_1.ximg exists
[Sat Jan 28 21:47:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src98.csv
[Sat Jan 28 21:47:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:46 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Sat Jan 28 21:47:46 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Sat Jan 28 21:47:46 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src98 appears to have run properly
[Sat Jan 28 21:48:19 2012] Spatial fit model total counts = 3049.000000, observed total counts = 3049.000000
[Sat Jan 28 21:48:19 2012] Offset between fit and detection position for source 110 = 0.062652 pixels
[Sat Jan 28 21:48:19 2012] 2934.900000 total counts/ 1789.280000 bgd. counts: snr = 27.083291
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 0.062652 pixels
  Position = (353.7, 238.0) = 0 42 14.92 41 12 35.4
  Extent = 4.8 (4.5-5.0)", rotation angle = 0
  Source counts = 1145.6 +/- 54.2
  Background counts = 1789.3
  Rate = 0.04 +/- 0.002
[Sat Jan 28 21:48:19 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:19 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:48:19 2012] Source does appear to be extended
[Sat Jan 28 21:48:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:33 2012] Initial guess for spatial extent in simple fitting = 4.75"
[Sat Jan 28 21:49:33 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.182
[Sat Jan 28 21:49:33 2012] Giving source the simple spatial ID 89 for pass 1, mean size = 4.75"
[Sat Jan 28 21:49:35 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src89.ximg exists
[Sat Jan 28 21:49:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src89.csv
[Sat Jan 28 21:49:35 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src89_1.ximg exists
[Sat Jan 28 21:49:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src89.csv
[Sat Jan 28 21:49:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:37 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src89.ximg exists
[Sat Jan 28 21:49:37 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src89_1.ximg exists
[Sat Jan 28 21:49:37 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src89 appears to have run properly
[Sat Jan 28 21:50:07 2012] Spatial fit model total counts = 3049.000000, observed total counts = 3049.000000
[Sat Jan 28 21:50:07 2012] Offset between fit and detection position for source 110 = 0.000173 pixels
[Sat Jan 28 21:50:07 2012] 2934.910000 total counts/ 1789.260000 bgd. counts: snr = 27.084151
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 0.000173 pixels
  Position = (353.7, 238.0) = 0 42 14.92 41 12 35.4
  Extent = 4.8 (4.5-5.0)", rotation angle = 0
  Source counts = 1145.7 +/- 54.2
  Background counts = 1789.3
  Rate = 0.04 +/- 0.002
[Sat Jan 28 21:50:08 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:08 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:08 2012] Source does appear to be extended
[Sat Jan 28 21:50:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:51:10 2012] Counts = 1145.650000, rescaling region sizes by 2.000000
[Sat Jan 28 21:51:10 2012] XMMSAS src. selection expression = ellipse(30724.348800, 20656.510400, 570.616816, 570.616816, 0.000000, X, Y)
[Sat Jan 28 21:51:10 2012] Not overwriting source region fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_src.reg
[Sat Jan 28 21:51:10 2012] Extracting stamp from image fullrun_pn_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (321, 205) - (387, 271)
[Sat Jan 28 21:51:10 2012] XMMSAS bgd. selection expression = annulus(30724.348800, 20656.510400, 1902.056055, 3804.112109, X, Y) && !ellipse(22952.866000, 25610.302000, 6993.600201, 6993.600201, 0.000000, X, Y) && !ellipse(26487.968231, 25166.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23757.898000, 25189.499000, 3496.800101, 3496.800101, 0.000000, X, Y) && !ellipse(29287.734280, 24782.839800, 337.771210, 337.771210, 0.000000, X, Y) && !ellipse(28345.955078, 24511.925507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27439.486000, 23790.772000, 1166.136034, 1166.136034, 0.000000, X, Y) && !ellipse(24187.752000, 25030.644200, 3414.768098, 3414.768098, 0.000000, X, Y) && !ellipse(31794.270388, 23750.205400, 419.852012, 419.852012, 0.000000, X, Y) && !ellipse(28149.124481, 23532.227661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28948.850800, 24258.288400, 405.692012, 405.692012, 0.000000, X, Y) && !ellipse(29108.410200, 23068.000000, 1341.000039, 1341.000039, 0.000000, X, Y) && !ellipse(29969.224060, 22808.217102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28923.070831, 22321.449341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.310547, 22502.020538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29896.152180, 22250.301800, 386.303211, 313.992809, 0.000000, X, Y) && !ellipse(28453.884800, 21958.251200, 318.332809, 318.332809, 0.000000, X, Y) && !ellipse(29082.663460, 21849.172200, 397.048811, 397.048811, 0.000000, X, Y) && !ellipse(26871.402158, 21443.353610, 533.397843, 449.329399, 332.843913, X, Y) && !ellipse(29868.155060, 20469.438965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30110.803497, 20409.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27747.863000, 20420.841200, 448.930413, 448.930413, 0.000000, X, Y) && !ellipse(31502.070709, 18557.747513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.293701, 17552.383499, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 21:51:10 2012] Writing fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110.gif
[Sat Jan 28 21:51:23 2012] ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_src.evt and ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_bgd.evt exist, delete to re-create
[Sat Jan 28 21:51:24 2012] Mean detx,y = (-6766.23, -2734.65) 
[Sat Jan 28 21:51:24 2012] ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_src.img and ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_bgd.img exist, delete to re-create
[Sat Jan 28 21:51:24 2012] ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_bgd.pi exist, delete to re-create
[Sat Jan 28 21:51:24 2012] Setting source spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Sat Jan 28 21:51:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_bgd.pi.gz
[Sat Jan 28 21:51:24 2012] ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_bgd.lc exist, delete to re-create
[Sun Jan 29 17:27:45 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:45 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Sun Jan 29 17:27:48 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:48 2012] Using photon index=1.80, rate=0.0432, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110.arf
[Sun Jan 29 17:27:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:48 2012] Updating source flux to 1.9e-13
[Thu Feb  2 08:42:56 2012] fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110.rmf exists, delete to re-create
[Thu Feb  2 08:42:56 2012] fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110.arf exists, delete to re-create
[Thu Feb  2 08:43:35 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:35 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Thu Feb  2 08:43:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:38 2012] Using photon index=1.80, rate=0.0432, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src110.arf
[Thu Feb  2 08:43:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:38 2012] Updating source flux to 1.9e-13