[Sat Jan 28 21:46:35 2012] Detection parameters:
  Position = (292.9, 286.0) = 0 42 38.36 41 16 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50888.7 +/- 268.0
  Background counts = 205.6
  Rate = 2 +/- 0.01

[Sat Jan 28 21:46:39 2012] Off-axis axis estimate = 0.99'
[Sat Jan 28 21:47:41 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:41 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Sat Jan 28 21:47:41 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.914
[Sat Jan 28 21:47:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.92"
[Sat Jan 28 21:47:42 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jan 28 21:47:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src1.csv
[Sat Jan 28 21:47:42 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jan 28 21:47:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src1.csv
[Sat Jan 28 21:47:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:44 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jan 28 21:47:44 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jan 28 21:47:44 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jan 28 21:48:19 2012] Spatial fit model total counts = 49935.900000, observed total counts = 49963.000000
[Sat Jan 28 21:48:19 2012] Offset between fit and detection position for source 1 = 0.047418 pixels
[Sat Jan 28 21:48:19 2012] 48412.400000 total counts/ 16980.200000 bgd. counts: snr = 241.214482
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.047418 pixels
  Position = (292.9, 285.9) = 0 42 38.38 41 16 4.2
  Extent = 5.6 (5.6-5.7)", rotation angle = 0
  Source counts = 31432.2 +/- 220.0
  Background counts = 16980.2
  Rate = 1 +/- 0.008
[Sat Jan 28 21:48:19 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:19 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:48:19 2012] Source does appear to be extended
[Sat Jan 28 21:48:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:33 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Sat Jan 28 21:49:33 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.239
[Sat Jan 28 21:49:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.64"
[Sat Jan 28 21:49:33 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jan 28 21:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src1.csv
[Sat Jan 28 21:49:33 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jan 28 21:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src1.csv
[Sat Jan 28 21:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:35 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jan 28 21:49:35 2012] fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jan 28 21:49:35 2012] Fit fullrun_pn_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jan 28 21:50:07 2012] Spatial fit model total counts = 49956.000000, observed total counts = 49963.000000
[Sat Jan 28 21:50:07 2012] Offset between fit and detection position for source 1 = 0.000179 pixels
[Sat Jan 28 21:50:07 2012] 48433.900000 total counts/ 16995.300000 bgd. counts: snr = 241.156394
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000179 pixels
  Position = (292.9, 285.9) = 0 42 38.38 41 16 4.2
  Extent = 5.6 (5.6-5.7)", rotation angle = 0
  Source counts = 31438.6 +/- 220.1
  Background counts = 16995.3
  Rate = 1 +/- 0.008
[Sat Jan 28 21:50:07 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:07 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:07 2012] Source does appear to be extended
[Sat Jan 28 21:50:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:51:05 2012] Counts = 31438.600000, rescaling region sizes by 3.000000
[Sat Jan 28 21:51:05 2012] XMMSAS src. selection expression = ellipse(25429.939760, 24828.759000, 1014.858029, 1014.858029, 0.000000, X, Y)
[Sat Jan 28 21:51:05 2012] Not overwriting source region fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_src.reg
[Sat Jan 28 21:51:05 2012] Extracting stamp from image fullrun_pn_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (235, 228) - (351, 344)
[Sat Jan 28 21:51:05 2012] XMMSAS bgd. selection expression = annulus(25429.939760, 24828.759000, 5074.290146, 10148.580292, X, Y) && !ellipse(27461.190600, 34746.460000, 1681.544048, 449.016013, 284.662000, X, Y) && !ellipse(27458.869600, 34521.258000, 1515.896044, 1515.896044, 0.000000, X, Y) && !ellipse(27064.485880, 32987.478600, 1484.376043, 506.028815, 98.069000, X, Y) && !ellipse(27036.058800, 32812.320600, 1484.376043, 501.744014, 98.522000, X, Y) && !ellipse(23583.098022, 31160.501190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19865.226000, 31192.218000, 478.727214, 367.979211, 334.092200, X, Y) && !ellipse(26419.518800, 31733.306600, 389.002411, 389.002411, 0.000000, X, Y) && !ellipse(24735.165720, 30859.433600, 354.852810, 354.852810, 0.000000, X, Y) && !ellipse(20149.969600, 29724.914000, 1527.176044, 1527.176044, 0.000000, X, Y) && !ellipse(32098.366394, 30514.784790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30631.814800, 30179.392000, 457.374413, 457.374413, 0.000000, X, Y) && !ellipse(18947.039856, 29944.072968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16361.041537, 29899.102157, 523.298130, 468.398141, 100.623880, X, Y) && !ellipse(26197.483000, 29672.810600, 491.917614, 394.542411, 353.405730, X, Y) && !ellipse(26240.678802, 28652.985321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27096.865760, 29128.235000, 416.749612, 416.749612, 0.000000, X, Y) && !ellipse(28258.788200, 28654.431000, 447.636013, 447.636013, 0.000000, X, Y) && !ellipse(20707.600000, 28740.622000, 433.325612, 433.325612, 0.000000, X, Y) && !ellipse(21444.315277, 28069.500153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24633.565674, 27610.254425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16976.530800, 27990.414800, 503.990415, 503.990415, 0.000000, X, Y) && !ellipse(25068.268000, 28060.134000, 444.192013, 444.192013, 0.000000, X, Y) && !ellipse(31160.438000, 27886.673400, 451.920013, 451.920013, 0.000000, X, Y) && !ellipse(22311.639008, 28222.275848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24656.582123, 27252.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17615.897110, 27393.142059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32664.662000, 27554.474000, 787.035223, 787.035223, 0.000000, X, Y) && !ellipse(30720.204407, 27269.723022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23039.687000, 27477.224200, 385.168011, 385.168011, 0.000000, X, Y) && !ellipse(31404.732025, 27186.740082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22871.327148, 26740.557098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19722.007000, 27258.587000, 421.872812, 421.872812, 0.000000, X, Y) && !ellipse(24853.075531, 26739.821655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16176.403946, 27075.502319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32009.749481, 26863.179626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24084.012000, 26756.060000, 518.503215, 363.382410, 0.000000, X, Y) && !ellipse(22326.268219, 26654.027039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26368.883800, 27345.800200, 427.146412, 396.384811, 89.115678, X, Y) && !ellipse(21218.216965, 25973.304077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28602.590210, 25832.417603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31401.278000, 26459.116000, 1439.736041, 1439.736041, 0.000000, X, Y) && !ellipse(19833.811676, 25693.283447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31437.096832, 25714.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22952.866000, 25610.302000, 6993.600201, 6993.600201, 0.000000, X, Y) && !ellipse(26487.968231, 25166.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23757.898000, 25189.499000, 3496.800101, 3496.800101, 0.000000, X, Y) && !ellipse(20631.148000, 24871.203800, 437.210413, 437.210413, 0.000000, X, Y) && !ellipse(29287.734280, 24782.839800, 337.771210, 337.771210, 0.000000, X, Y) && !ellipse(27168.794000, 25164.436900, 350.268010, 350.268010, 0.000000, X, Y) && !ellipse(21744.199146, 24823.931099, 360.756512, 356.672408, 89.246491, X, Y) && !ellipse(28345.955078, 24511.925507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22296.569880, 24356.904600, 364.908011, 364.908011, 0.000000, X, Y) && !ellipse(23249.233780, 24115.059400, 491.987214, 491.987214, 0.000000, X, Y) && !ellipse(27439.486000, 23790.772000, 1166.136034, 1166.136034, 0.000000, X, Y) && !ellipse(21527.788000, 23127.384000, 1323.776038, 1323.776038, 0.000000, X, Y) && !ellipse(20912.576630, 23904.826508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24187.752000, 25030.644200, 3414.768098, 3414.768098, 0.000000, X, Y) && !ellipse(31794.270388, 23750.205400, 419.852012, 419.852012, 0.000000, X, Y) && !ellipse(28149.124481, 23532.227661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28948.850800, 24258.288400, 405.692012, 405.692012, 0.000000, X, Y) && !ellipse(19906.633200, 24067.510200, 479.218414, 479.218414, 0.000000, X, Y) && !ellipse(36046.718872, 23159.873077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.410200, 23068.000000, 1341.000039, 1341.000039, 0.000000, X, Y) && !ellipse(29969.224060, 22808.217102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23002.759600, 22982.188000, 1078.392031, 1078.392031, 0.000000, X, Y) && !ellipse(25228.292200, 22933.862600, 377.949611, 377.949611, 0.000000, X, Y) && !ellipse(18203.456600, 23393.860400, 439.416013, 439.416013, 0.000000, X, Y) && !ellipse(28923.070831, 22321.449341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.310547, 22502.020538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25129.695068, 22329.637451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24606.808000, 23301.502000, 457.559213, 457.559213, 0.000000, X, Y) && !ellipse(23976.422028, 22565.566010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23159.044708, 22523.616547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23105.711800, 23606.038000, 1181.616034, 1181.616034, 0.000000, X, Y) && !ellipse(20396.577619, 22248.900200, 706.284020, 706.284020, 0.000000, X, Y) && !ellipse(29896.152180, 22250.301800, 386.303211, 313.992809, 0.000000, X, Y) && !ellipse(25907.053131, 22160.664749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28453.884800, 21958.251200, 318.332809, 318.332809, 0.000000, X, Y) && !ellipse(24980.519800, 21760.850000, 374.508811, 374.508811, 0.000000, X, Y) && !ellipse(24359.602000, 21558.061600, 382.263211, 382.263211, 0.000000, X, Y) && !ellipse(29082.663460, 21849.172200, 397.048811, 397.048811, 0.000000, X, Y) && !ellipse(26871.402158, 21443.353610, 533.397843, 449.329399, 332.843913, X, Y) && !ellipse(18648.448624, 20929.250214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30724.348800, 20656.510400, 380.411211, 380.411211, 0.000000, X, Y) && !ellipse(29868.155060, 20469.438965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30110.803497, 20409.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27747.863000, 20420.841200, 448.930413, 448.930413, 0.000000, X, Y) && !ellipse(23474.687866, 19885.556870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24016.410800, 19524.191000, 430.032012, 374.349611, 160.537000, X, Y) && !ellipse(17086.480286, 19255.336548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21060.398041, 18849.916229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31502.070709, 18557.747513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.293701, 17552.383499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28974.044739, 14737.205490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17327.186569, 14386.209290, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan 28 21:51:05 2012] Writing fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1.gif
[Sat Jan 28 21:51:12 2012] ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112570401/products/events/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Jan 28 21:51:12 2012] Mean detx,y = (-676.07, 271.00) 
[Sat Jan 28 21:51:12 2012] ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112570401/products/images/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Jan 28 21:51:12 2012] ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Jan 28 21:51:12 2012] Setting source spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jan 28 21:51:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jan 28 21:51:12 2012] ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Jan 28 21:51:37 2012] fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Sun Jan 29 17:27:44 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:44 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jan 29 17:27:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:46 2012] Using photon index=1.80, rate=1.19, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1.arf
[Sun Jan 29 17:27:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:46 2012] Updating source flux to 2.9e-12
[Sun Jan 29 17:47:53 2012] Reading fit data from xmm0112570401/analysis//spectral/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jan 29 17:47:53 2012] Spectral fit parameter nH value = 9.98853e+20
[Sun Jan 29 17:47:53 2012] Spectral fit parameter PhoIndex value = 1.90789
[Sun Jan 29 17:47:53 2012] Failed to get F(0.3-8.0) from xmm0112570401/analysis//spectral/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jan 29 17:47:53 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:47:53 2012] Using Nh = 1e+21, photon index=1.91, rate=1.19, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1.arf
[Sun Jan 29 17:47:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:47:53 2012] Updating source flux to 3.3e-12
[Thu Feb  2 08:43:33 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:33 2012] Error reading totcts from fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb  2 08:43:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:35 2012] Using photon index=1.80, rate=1.19, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1.arf
[Thu Feb  2 08:43:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:35 2012] Updating source flux to 2.9e-12
[Thu Feb  2 08:45:14 2012] Reading fit data from xmm0112570401/analysis//spectral/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_pl.csv
[Thu Feb  2 08:45:14 2012] Spectral fit parameter nH value = 9.98853e+20
[Thu Feb  2 08:45:14 2012] Spectral fit parameter PhoIndex value = 1.90789
[Thu Feb  2 08:45:14 2012] Failed to get F(0.3-8.0) from xmm0112570401/analysis//spectral/fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Feb  2 08:45:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:45:14 2012] Using Nh = 1e+21, photon index=1.91, rate=1.19, arf fullrun_pn_xmm0112570401_pi300-10000_pass1_cl_src1.arf
[Thu Feb  2 08:45:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:45:14 2012] Updating source flux to 3.3e-12