[Sat Jan 28 21:46:45 2012] Detection parameters:
  Position = (353.4, 313.2) = 0 42 15.01 41 18 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.6 +/- 14.0
  Background counts = 33.5
  Rate = 0.003 +/- 0.0005

[Sat Jan 28 21:46:46 2012] Off-axis axis estimate = 4.13'
[Sat Jan 28 21:47:50 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:50 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Sat Jan 28 21:47:50 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.039
[Sat Jan 28 21:47:50 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 8.49"
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src83.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src83.csv
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src83_1.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src83.csv
[Sat Jan 28 21:47:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:53 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Sat Jan 28 21:47:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src83.csv
[Sat Jan 28 21:47:53 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Sat Jan 28 21:47:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src83.csv
[Sat Jan 28 21:47:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:03 2012] Source 77 is offset by 3.462386 and -0.710618 pixels which is larger than
2 X fitted extent = 1.007844 x 1.007844, not incorporating fit results
[Sat Jan 28 21:49:03 2012] Warning, spatial fit 83 centroid is now closest to src. 34
[Sat Jan 28 21:49:03 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:49:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:49:03 2012] Assessing source extent using major
[Sat Jan 28 21:49:03 2012] Source does appear to be extended
[Sat Jan 28 21:49:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:40 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:40 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Sat Jan 28 21:49:40 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.039
[Sat Jan 28 21:49:40 2012] Giving source the simple spatial ID 78 for pass 1, mean size = 8.49"
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src78.ximg exists
[Sat Jan 28 21:49:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src78.csv
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src78_1.ximg exists
[Sat Jan 28 21:49:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src78.csv
[Sat Jan 28 21:49:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Sat Jan 28 21:49:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src78.csv
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Sat Jan 28 21:49:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src78.csv
[Sat Jan 28 21:49:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:50:37 2012] Warning, spatial fit 78 centroid is now closest to src. 20
[Sat Jan 28 21:50:37 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:37 2012] Assessing source extent using major
[Sat Jan 28 21:50:37 2012] Source does appear to be extended
[Sat Jan 28 21:50:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 11:01:10 2012] XMMSAS src. selection expression = ellipse(30697.267609, 27202.216248, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan 29 11:01:10 2012] Writing source region out to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_src.reg
[Sun Jan 29 11:01:10 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (316, 276) - (391, 351)
[Sun Jan 29 11:01:11 2012] XMMSAS bgd. selection expression = annulus(30697.267609, 27202.216248, 1087.500000, 2175.000000, X, Y) && !ellipse(31156.595291, 27888.957722, 445.928919, 407.357215, 60.731117, X, Y) && !ellipse(32404.074432, 27459.278839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29293.394318, 24761.240723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30588.242920, 26381.658200, 378.468011, 378.468011, 0.000000, X, Y) && !ellipse(28244.666360, 28665.331000, 378.955211, 296.326409, 206.472811, X, Y) && !ellipse(31412.192657, 27129.407379, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan 29 11:01:11 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77.gif
[Sun Jan 29 12:01:34 2012] Mean detx,y = (5689.25, -3982.84) 
[Sun Jan 29 12:01:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 12:01:46 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 12:01:47 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Sun Jan 29 12:01:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Sun Jan 29 15:54:52 2012] Not generating rmf since there are only 72 counts
[Sun Jan 29 15:54:52 2012] rmf not generated due to insufficient counts
[Sun Jan 29 17:27:53 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:53 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Sun Jan 29 17:27:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:54 2012] Using photon index=1.80, rate=0.00274, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77.arf
[Sun Jan 29 17:27:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:54 2012] Updating source flux to 3.8e-14
[Sun Jan 29 17:34:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb  2 08:43:15 2012] XMMSAS src. selection expression = ellipse(30697.267609, 27202.216248, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb  2 08:43:15 2012] Not overwriting source region fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_src.reg
[Thu Feb  2 08:43:15 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (316, 276) - (391, 351)
[Thu Feb  2 08:43:15 2012] XMMSAS bgd. selection expression = annulus(30697.267609, 27202.216248, 1087.500000, 2175.000000, X, Y) && !ellipse(31156.595291, 27888.957722, 445.928919, 407.357215, 60.731117, X, Y) && !ellipse(32404.074432, 27459.278839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29293.394318, 24761.240723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30588.242920, 26381.658200, 378.468011, 378.468011, 0.000000, X, Y) && !ellipse(28244.666360, 28665.331000, 378.955211, 296.326409, 206.472811, X, Y) && !ellipse(31412.192657, 27129.407379, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 08:43:15 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77.gif
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_src.evt and ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:18 2012] Mean detx,y = (5689.25, -3982.84) 
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_src.img and ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:18 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Thu Feb  2 08:43:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:26 2012] Not generating rmf since there are only 72 counts
[Thu Feb  2 08:43:26 2012] rmf not generated due to insufficient counts
[Thu Feb  2 08:43:26 2012] fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77.arf exists, delete to re-create
[Thu Feb  2 08:43:43 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:43 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Thu Feb  2 08:43:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:45 2012] Using photon index=1.80, rate=0.00274, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src77.arf
[Thu Feb  2 08:43:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:45 2012] Updating source flux to 3.8e-14
[Thu Feb  2 08:43:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting