[Sat Jan 28 21:46:45 2012] Detection parameters:
  Position = (257.5, 306.1) = 0 42 52.04 41 17 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.2 +/- 16.7
  Background counts = 72.2
  Rate = 0.002 +/- 0.0005

[Sat Jan 28 21:46:46 2012] Off-axis axis estimate = 3.02'
[Sat Jan 28 21:47:50 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:50 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Sat Jan 28 21:47:50 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925
[Sat Jan 28 21:47:50 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 7.94"
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src90.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src90.csv
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src90_1.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src90.csv
[Sat Jan 28 21:47:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:53 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Sat Jan 28 21:47:53 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Sat Jan 28 21:47:53 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Sat Jan 28 21:49:03 2012] Source 76 is offset by 0.045120 and -1.178475 pixels which is larger than
2 X fitted extent = 0.915922 x 0.915922, not incorporating fit results
[Sat Jan 28 21:49:03 2012] Warning, spatial fit 90 centroid is now closest to src. 78
[Sat Jan 28 21:49:03 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:49:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:49:03 2012] Assessing source extent using major
[Sat Jan 28 21:49:03 2012] Source does appear to be extended
[Sat Jan 28 21:49:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:03 2012] Source is confused with source 78
[Sat Jan 28 21:49:40 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:40 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Sat Jan 28 21:49:40 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925
[Sat Jan 28 21:49:40 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 7.94"
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src85.ximg exists
[Sat Jan 28 21:49:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src85.csv
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src85_1.ximg exists
[Sat Jan 28 21:49:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src85.csv
[Sat Jan 28 21:49:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Sat Jan 28 21:49:43 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src85 appears to have run properly
[Sat Jan 28 21:50:37 2012] Spatial fit model total counts = 5912.120000, observed total counts = 5907.000000
[Sat Jan 28 21:50:37 2012] Offset between fit and detection position for source 76 = 2.443496 pixels
[Sat Jan 28 21:50:37 2012] Warning, changing simple spatial fit ID from 85 to 64
[Sat Jan 28 21:50:37 2012] 5867.070000 total counts/ 4409.570000 bgd. counts: snr = 21.948783
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 2.443496 pixels
  Position = (255.5, 307.5) = 0 42 52.82 41 17 37.7
  Extent = 30.9 (30.8-61.8)", rotation angle = 0
  Source counts = 1457.5 +/- 76.6
  Background counts = 4409.6
  Rate = 0.04 +/- 0.002
[Sat Jan 28 21:50:37 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:37 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:37 2012] Source does appear to be extended
[Sat Jan 28 21:50:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 11:01:11 2012] Counts = 1457.500000, rescaling region sizes by 2.000000
[Sun Jan 29 11:01:11 2012] XMMSAS src. selection expression = ellipse(22176.372000, 26700.172000, 3706.104107, 3706.104107, 0.000000, X, Y)
[Sun Jan 29 11:01:11 2012] Writing source region out to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_src.reg
[Sun Jan 29 11:01:11 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (42, 94) - (468, 520)
[Sun Jan 29 11:01:11 2012] XMMSAS bgd. selection expression = annulus(22176.372000, 26700.172000, 12353.680355, 24707.360711, X, Y) && !ellipse(25425.799400, 24836.405000, 1257.208836, 1257.208836, 0.000000, X, Y) && !ellipse(24612.426400, 24917.596400, 231.103207, 231.103207, 0.000000, X, Y) && !ellipse(23212.174200, 24018.696400, 523.360815, 523.360815, 0.000000, X, Y) && !ellipse(18200.691307, 23403.223862, 436.529613, 375.880896, 38.921007, X, Y) && !ellipse(22293.770880, 28249.623400, 427.332012, 377.668011, 12.572700, X, Y) && !ellipse(21742.627730, 24830.936160, 413.292210, 363.111502, 34.248003, X, Y) && !ellipse(27744.514600, 20412.198400, 422.929612, 422.929612, 0.000000, X, Y) && !ellipse(31156.595291, 27888.957722, 445.928919, 407.357215, 60.731117, X, Y) && !ellipse(23915.182000, 25062.510000, 1413.272041, 636.836818, 26.983000, X, Y) && !ellipse(27104.126560, 25189.937800, 399.454411, 399.454411, 0.000000, X, Y) && !ellipse(28951.249800, 24261.677200, 343.379210, 343.379210, 0.000000, X, Y) && !ellipse(22291.242460, 24356.726400, 314.512009, 314.512009, 0.000000, X, Y) && !ellipse(29922.511475, 22394.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23555.367600, 25229.482400, 706.636820, 706.636820, 0.000000, X, Y) && !ellipse(26873.991600, 21434.959400, 441.885613, 441.885613, 0.000000, X, Y) && !ellipse(16216.386032, 27092.223694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20684.220400, 28741.224200, 397.748811, 397.748811, 0.000000, X, Y) && !ellipse(21055.472961, 18918.478378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32404.074432, 27459.278839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12169.938187, 23258.475555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20616.717200, 24907.533520, 548.873616, 326.973609, 31.250600, X, Y) && !ellipse(19899.556600, 24076.309800, 419.614412, 419.614412, 0.000000, X, Y) && !ellipse(26355.591400, 27359.510000, 349.768010, 349.768010, 0.000000, X, Y) && !ellipse(29293.394318, 24761.240723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17322.832321, 14386.452225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27771.526800, 17560.813400, 357.358410, 357.358410, 0.000000, X, Y) && !ellipse(23984.574000, 19530.630000, 288.533608, 288.533608, 0.000000, X, Y) && !ellipse(19733.652023, 27262.129639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8483.575371, 25893.400970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16359.786819, 29895.268219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30588.242920, 26381.658200, 378.468011, 378.468011, 0.000000, X, Y) && !ellipse(19866.529060, 31196.872000, 362.060810, 362.060810, 0.000000, X, Y) && !ellipse(24574.826000, 23271.446000, 238.971207, 238.971207, 0.000000, X, Y) && !ellipse(23226.785126, 35991.085388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14015.320000, 14928.736600, 498.989614, 498.989614, 0.000000, X, Y) && !ellipse(13267.954758, 18393.280396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29070.329000, 21833.405200, 324.091209, 324.091209, 0.000000, X, Y) && !ellipse(28244.666360, 28665.331000, 378.955211, 296.326409, 206.472811, X, Y) && !ellipse(28255.735400, 36605.787200, 516.417652, 516.417652, 0.000000, X, Y) && !ellipse(14306.222094, 27767.264400, 575.012817, 457.032013, 97.942354, X, Y) && !ellipse(25224.422800, 22933.642800, 318.798409, 318.798409, 0.000000, X, Y) && !ellipse(26468.907776, 25163.039581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27079.718200, 29131.357800, 360.245736, 360.245736, 0.000000, X, Y) && !ellipse(24954.451000, 21706.848400, 257.736807, 257.736807, 0.000000, X, Y) && !ellipse(21650.046633, 27878.688804, 400.759285, 299.377092, 351.421740, X, Y) && !ellipse(28901.326800, 22498.626800, 275.472008, 275.472008, 0.000000, X, Y) && !ellipse(24341.980800, 21542.016400, 318.244009, 318.244009, 0.000000, X, Y) && !ellipse(27593.364600, 11058.960400, 411.144012, 411.144012, 0.000000, X, Y) && !ellipse(32032.037800, 30508.024200, 492.008852, 492.008852, 0.000000, X, Y) && !ellipse(23033.199800, 27473.579400, 296.711209, 296.711209, 0.000000, X, Y) && !ellipse(20966.334200, 24143.131400, 256.969607, 256.969607, 0.000000, X, Y) && !ellipse(24027.605682, 26762.721283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19881.977729, 17854.956585, 694.123383, 367.154598, 32.229235, X, Y) && !ellipse(31816.092800, 23774.518200, 436.050413, 436.050413, 0.000000, X, Y) && !ellipse(18641.991800, 20960.412600, 355.943210, 355.943210, 0.000000, X, Y) && !ellipse(25052.891000, 28068.387600, 333.231210, 333.231210, 0.000000, X, Y) && !ellipse(31486.580600, 18568.817400, 421.032012, 421.032012, 0.000000, X, Y) && !ellipse(28468.001465, 21961.404800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23465.997955, 19898.404556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36035.942108, 23157.141052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23168.196000, 25694.816000, 1235.368036, 1235.368036, 0.000000, X, Y) && !ellipse(31412.192657, 27129.407379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24777.107600, 30841.069800, 496.580814, 496.580814, 0.000000, X, Y) && !ellipse(26384.113420, 31770.643600, 726.956821, 726.956821, 0.000000, X, Y) && !ellipse(19004.500000, 25246.640000, 1452.576042, 1452.576042, 0.000000, X, Y) && !ellipse(25531.926697, 26118.953674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29899.047160, 40891.446600, 497.976613, 497.976613, 0.000000, X, Y) && !ellipse(15006.798492, 26510.968750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32361.604584, 11075.236420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.271200, 37608.037400, 470.697330, 470.697330, 0.000000, X, Y) && !ellipse(31688.416595, 20938.708755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.597140, 22488.978200, 607.028017, 607.028017, 0.000000, X, Y) && !ellipse(25887.846649, 23279.298950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.649506, 23969.983582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30697.267609, 27202.216248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20795.447357, 41280.203766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23027.065857, 26659.302582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22083.058000, 26902.926000, 1270.312037, 1270.312037, 0.000000, X, Y) && !ellipse(21729.515600, 25493.902000, 613.180818, 613.180818, 0.000000, X, Y) && !ellipse(24690.406000, 26107.750000, 963.120028, 963.120028, 0.000000, X, Y) && !ellipse(21604.898087, 25957.833221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23527.796417, 28614.452881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21847.017000, 41238.225400, 2008.496058, 2008.496058, 0.000000, X, Y)
[Sun Jan 29 11:01:11 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76.gif
[Sun Jan 29 12:03:33 2012] Mean detx,y = (-1465.85, -725.17) 
[Sun Jan 29 12:03:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 12:15:46 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 12:15:46 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Sun Jan 29 12:15:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Sun Jan 29 17:27:53 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:53 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Sun Jan 29 17:27:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:55 2012] Using photon index=1.80, rate=0.0448, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76.arf
[Sun Jan 29 17:27:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:55 2012] Updating source flux to 3.9e-13
[Sun Jan 29 17:34:49 2012] Flag b found in src. 76 procflags, skipping spectral fitting
[Sun Jan 29 17:34:49 2012] Flag c found in src. 76 procflags, skipping spectral fitting
[Thu Feb  2 08:43:15 2012] Counts = 1457.500000, rescaling region sizes by 2.000000
[Thu Feb  2 08:43:15 2012] XMMSAS src. selection expression = ellipse(22176.372000, 26700.172000, 3706.104107, 3706.104107, 0.000000, X, Y)
[Thu Feb  2 08:43:15 2012] Not overwriting source region fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_src.reg
[Thu Feb  2 08:43:15 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (42, 94) - (468, 520)
[Thu Feb  2 08:43:15 2012] XMMSAS bgd. selection expression = annulus(22176.372000, 26700.172000, 12353.680355, 24707.360711, X, Y) && !ellipse(25425.799400, 24836.405000, 1257.208836, 1257.208836, 0.000000, X, Y) && !ellipse(24612.426400, 24917.596400, 231.103207, 231.103207, 0.000000, X, Y) && !ellipse(23212.174200, 24018.696400, 523.360815, 523.360815, 0.000000, X, Y) && !ellipse(18200.691307, 23403.223862, 436.529613, 375.880896, 38.921007, X, Y) && !ellipse(22293.770880, 28249.623400, 427.332012, 377.668011, 12.572700, X, Y) && !ellipse(21742.627730, 24830.936160, 413.292210, 363.111502, 34.248003, X, Y) && !ellipse(27744.514600, 20412.198400, 422.929612, 422.929612, 0.000000, X, Y) && !ellipse(31156.595291, 27888.957722, 445.928919, 407.357215, 60.731117, X, Y) && !ellipse(23915.182000, 25062.510000, 1413.272041, 636.836818, 26.983000, X, Y) && !ellipse(27104.126560, 25189.937800, 399.454411, 399.454411, 0.000000, X, Y) && !ellipse(28951.249800, 24261.677200, 343.379210, 343.379210, 0.000000, X, Y) && !ellipse(22291.242460, 24356.726400, 314.512009, 314.512009, 0.000000, X, Y) && !ellipse(29922.511475, 22394.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23555.367600, 25229.482400, 706.636820, 706.636820, 0.000000, X, Y) && !ellipse(26873.991600, 21434.959400, 441.885613, 441.885613, 0.000000, X, Y) && !ellipse(16216.386032, 27092.223694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20684.220400, 28741.224200, 397.748811, 397.748811, 0.000000, X, Y) && !ellipse(21055.472961, 18918.478378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32404.074432, 27459.278839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12169.938187, 23258.475555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20616.717200, 24907.533520, 548.873616, 326.973609, 31.250600, X, Y) && !ellipse(19899.556600, 24076.309800, 419.614412, 419.614412, 0.000000, X, Y) && !ellipse(26355.591400, 27359.510000, 349.768010, 349.768010, 0.000000, X, Y) && !ellipse(29293.394318, 24761.240723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17322.832321, 14386.452225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27771.526800, 17560.813400, 357.358410, 357.358410, 0.000000, X, Y) && !ellipse(23984.574000, 19530.630000, 288.533608, 288.533608, 0.000000, X, Y) && !ellipse(19733.652023, 27262.129639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8483.575371, 25893.400970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16359.786819, 29895.268219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30588.242920, 26381.658200, 378.468011, 378.468011, 0.000000, X, Y) && !ellipse(19866.529060, 31196.872000, 362.060810, 362.060810, 0.000000, X, Y) && !ellipse(24574.826000, 23271.446000, 238.971207, 238.971207, 0.000000, X, Y) && !ellipse(23226.785126, 35991.085388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14015.320000, 14928.736600, 498.989614, 498.989614, 0.000000, X, Y) && !ellipse(13267.954758, 18393.280396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29070.329000, 21833.405200, 324.091209, 324.091209, 0.000000, X, Y) && !ellipse(28244.666360, 28665.331000, 378.955211, 296.326409, 206.472811, X, Y) && !ellipse(28255.735400, 36605.787200, 516.417652, 516.417652, 0.000000, X, Y) && !ellipse(14306.222094, 27767.264400, 575.012817, 457.032013, 97.942354, X, Y) && !ellipse(25224.422800, 22933.642800, 318.798409, 318.798409, 0.000000, X, Y) && !ellipse(26468.907776, 25163.039581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27079.718200, 29131.357800, 360.245736, 360.245736, 0.000000, X, Y) && !ellipse(24954.451000, 21706.848400, 257.736807, 257.736807, 0.000000, X, Y) && !ellipse(21650.046633, 27878.688804, 400.759285, 299.377092, 351.421740, X, Y) && !ellipse(28901.326800, 22498.626800, 275.472008, 275.472008, 0.000000, X, Y) && !ellipse(24341.980800, 21542.016400, 318.244009, 318.244009, 0.000000, X, Y) && !ellipse(27593.364600, 11058.960400, 411.144012, 411.144012, 0.000000, X, Y) && !ellipse(32032.037800, 30508.024200, 492.008852, 492.008852, 0.000000, X, Y) && !ellipse(23033.199800, 27473.579400, 296.711209, 296.711209, 0.000000, X, Y) && !ellipse(20966.334200, 24143.131400, 256.969607, 256.969607, 0.000000, X, Y) && !ellipse(24027.605682, 26762.721283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19881.977729, 17854.956585, 694.123383, 367.154598, 32.229235, X, Y) && !ellipse(31816.092800, 23774.518200, 436.050413, 436.050413, 0.000000, X, Y) && !ellipse(18641.991800, 20960.412600, 355.943210, 355.943210, 0.000000, X, Y) && !ellipse(25052.891000, 28068.387600, 333.231210, 333.231210, 0.000000, X, Y) && !ellipse(31486.580600, 18568.817400, 421.032012, 421.032012, 0.000000, X, Y) && !ellipse(28468.001465, 21961.404800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23465.997955, 19898.404556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36035.942108, 23157.141052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23168.196000, 25694.816000, 1235.368036, 1235.368036, 0.000000, X, Y) && !ellipse(31412.192657, 27129.407379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24777.107600, 30841.069800, 496.580814, 496.580814, 0.000000, X, Y) && !ellipse(26384.113420, 31770.643600, 726.956821, 726.956821, 0.000000, X, Y) && !ellipse(19004.500000, 25246.640000, 1452.576042, 1452.576042, 0.000000, X, Y) && !ellipse(25531.926697, 26118.953674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29899.047160, 40891.446600, 497.976613, 497.976613, 0.000000, X, Y) && !ellipse(15006.798492, 26510.968750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32361.604584, 11075.236420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.271200, 37608.037400, 470.697330, 470.697330, 0.000000, X, Y) && !ellipse(31688.416595, 20938.708755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.597140, 22488.978200, 607.028017, 607.028017, 0.000000, X, Y) && !ellipse(25887.846649, 23279.298950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.649506, 23969.983582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30697.267609, 27202.216248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20795.447357, 41280.203766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23027.065857, 26659.302582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22083.058000, 26902.926000, 1270.312037, 1270.312037, 0.000000, X, Y) && !ellipse(21729.515600, 25493.902000, 613.180818, 613.180818, 0.000000, X, Y) && !ellipse(24690.406000, 26107.750000, 963.120028, 963.120028, 0.000000, X, Y) && !ellipse(21604.898087, 25957.833221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23527.796417, 28614.452881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21847.017000, 41238.225400, 2008.496058, 2008.496058, 0.000000, X, Y)
[Thu Feb  2 08:43:15 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76.gif
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_src.evt and ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:18 2012] Mean detx,y = (-1465.85, -725.17) 
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_src.img and ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:18 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Thu Feb  2 08:43:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:26 2012] fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76.rmf exists, delete to re-create
[Thu Feb  2 08:43:26 2012] fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76.arf exists, delete to re-create
[Thu Feb  2 08:43:43 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:43 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Thu Feb  2 08:43:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:45 2012] Using photon index=1.80, rate=0.0448, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src76.arf
[Thu Feb  2 08:43:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:45 2012] Updating source flux to 3.9e-13
[Thu Feb  2 08:43:52 2012] Flag b found in src. 76 procflags, skipping spectral fitting
[Thu Feb  2 08:43:52 2012] Flag c found in src. 76 procflags, skipping spectral fitting