[Sat Jan 28 21:46:45 2012] Detection parameters:
  Position = (304.0, 365.9) = 0 42 34.08 41 21 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.8 +/- 15.1
  Background counts = 29.6
  Rate = 0.004 +/- 0.0006

[Sat Jan 28 21:46:46 2012] Off-axis axis estimate = 4.91'
[Sat Jan 28 21:47:50 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:50 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Sat Jan 28 21:47:50 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.160
[Sat Jan 28 21:47:50 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 8.88"
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src69.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src69.csv
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src69_1.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src69.csv
[Sat Jan 28 21:47:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:53 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Sat Jan 28 21:47:53 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Sat Jan 28 21:47:53 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Sat Jan 28 21:49:03 2012] Spatial fit model total counts = 235.000000, observed total counts = 235.000000
[Sat Jan 28 21:49:03 2012] Offset between fit and detection position for source 68 = 0.279825 pixels
[Sat Jan 28 21:49:03 2012] 238.202000 total counts/ 103.487000 bgd. counts: snr = 13.242594
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.279825 pixels
  Position = (303.8, 365.7) = 0 42 34.15 41 21 51.2
  Extent = 9.1 (7.7-11.4)", rotation angle = 0
  Source counts = 134.7 +/- 15.4
  Background counts = 103.5
  Rate = 0.004 +/- 0.0005
[Sat Jan 28 21:49:03 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:49:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:49:03 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:49:03 2012] Source does appear to be extended
[Sat Jan 28 21:49:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:40 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Sat Jan 28 21:49:40 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.923
[Sat Jan 28 21:49:40 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 9.15"
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src67.ximg exists
[Sat Jan 28 21:49:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src67.csv
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src67_1.ximg exists
[Sat Jan 28 21:49:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src67.csv
[Sat Jan 28 21:49:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sat Jan 28 21:49:43 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Sat Jan 28 21:50:37 2012] Spatial fit model total counts = 235.000000, observed total counts = 235.000000
[Sat Jan 28 21:50:37 2012] Offset between fit and detection position for source 68 = 0.007660 pixels
[Sat Jan 28 21:50:37 2012] 238.166000 total counts/ 104.149000 bgd. counts: snr = 13.132044
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.007660 pixels
  Position = (303.8, 365.7) = 0 42 34.15 41 21 51.3
  Extent = 9.1 (7.7-11.4)", rotation angle = 0
  Source counts = 134.0 +/- 15.4
  Background counts = 104.1
  Rate = 0.004 +/- 0.0005
[Sat Jan 28 21:50:37 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:37 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:37 2012] Source does appear to be extended
[Sat Jan 28 21:50:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 11:01:10 2012] XMMSAS src. selection expression = ellipse(26384.113420, 31770.643600, 545.217616, 545.217616, 0.000000, X, Y)
[Sun Jan 29 11:01:10 2012] Writing source region out to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_src.reg
[Sun Jan 29 11:01:10 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (272, 334) - (335, 397)
[Sun Jan 29 11:01:10 2012] XMMSAS bgd. selection expression = annulus(26384.113420, 31770.643600, 908.696026, 1817.392052, X, Y) && !ellipse(24777.107600, 30841.069800, 496.580814, 496.580814, 0.000000, X, Y)
[Sun Jan 29 11:01:10 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68.gif
[Sun Jan 29 11:57:28 2012] Mean detx,y = (431.70, -7437.59) 
[Sun Jan 29 11:57:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 11:57:48 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 11:57:48 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sun Jan 29 11:57:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sun Jan 29 17:27:53 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:53 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sun Jan 29 17:27:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:54 2012] Using photon index=1.80, rate=0.00412, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68.arf
[Sun Jan 29 17:27:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:54 2012] Updating source flux to 5.8e-14
[Thu Feb  2 08:43:15 2012] XMMSAS src. selection expression = ellipse(26384.113420, 31770.643600, 545.217616, 545.217616, 0.000000, X, Y)
[Thu Feb  2 08:43:15 2012] Not overwriting source region fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_src.reg
[Thu Feb  2 08:43:15 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (272, 334) - (335, 397)
[Thu Feb  2 08:43:15 2012] XMMSAS bgd. selection expression = annulus(26384.113420, 31770.643600, 908.696026, 1817.392052, X, Y) && !ellipse(24777.107600, 30841.069800, 496.580814, 496.580814, 0.000000, X, Y)
[Thu Feb  2 08:43:15 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68.gif
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_src.evt and ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:18 2012] Mean detx,y = (431.70, -7437.59) 
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_src.img and ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:18 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Thu Feb  2 08:43:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:26 2012] fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68.rmf exists, delete to re-create
[Thu Feb  2 08:43:26 2012] fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68.arf exists, delete to re-create
[Thu Feb  2 08:43:43 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:43 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Thu Feb  2 08:43:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:44 2012] Using photon index=1.80, rate=0.00412, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src68.arf
[Thu Feb  2 08:43:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:44 2012] Updating source flux to 5.8e-14