[Sat Jan 28 21:46:43 2012] Detection parameters:
  Position = (319.4, 235.1) = 0 42 28.13 41 12 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2635.6 +/- 63.0
  Background counts = 48.8
  Rate = 0.1 +/- 0.002

[Sat Jan 28 21:46:46 2012] Off-axis axis estimate = 4.84'
[Sat Jan 28 21:47:50 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:50 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Sat Jan 28 21:47:50 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Sat Jan 28 21:47:50 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.85"
[Sat Jan 28 21:47:50 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jan 28 21:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src7.csv
[Sat Jan 28 21:47:50 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jan 28 21:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src7.csv
[Sat Jan 28 21:47:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:52 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jan 28 21:47:52 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jan 28 21:47:52 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Jan 28 21:49:03 2012] Warning, spatial fit 7 centroid is now closest to src. 92
[Sat Jan 28 21:49:03 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:49:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:49:03 2012] Assessing source extent using major
[Sat Jan 28 21:49:03 2012] Source does appear to be extended
[Sat Jan 28 21:49:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:40 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:40 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Sat Jan 28 21:49:40 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Sat Jan 28 21:49:40 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.85"
[Sat Jan 28 21:49:41 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src7.ximg exists
[Sat Jan 28 21:49:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src7.csv
[Sat Jan 28 21:49:41 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Jan 28 21:49:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src7.csv
[Sat Jan 28 21:49:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jan 28 21:49:42 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Jan 28 21:50:37 2012] Spatial fit model total counts = 2492.790000, observed total counts = 2494.000000
[Sat Jan 28 21:50:37 2012] Offset between fit and detection position for source 6 = 0.063586 pixels
[Sat Jan 28 21:50:37 2012] 2500.504000 total counts/ 788.724000 bgd. counts: snr = 60.951643
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.063586 pixels
  Position = (319.5, 235.2) = 0 42 28.13 41 12 23.3
  Extent = 5.3 (5.0-5.4)", rotation angle = 0
  Source counts = 1711.8 +/- 50.0
  Background counts = 788.7
  Rate = 0.05 +/- 0.002
[Sat Jan 28 21:50:37 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:37 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:37 2012] Source does appear to be extended
[Sat Jan 28 21:50:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 11:01:08 2012] Counts = 1711.780000, rescaling region sizes by 2.000000
[Sun Jan 29 11:01:08 2012] XMMSAS src. selection expression = ellipse(27744.514600, 20412.198400, 634.394418, 634.394418, 0.000000, X, Y)
[Sun Jan 29 11:01:08 2012] Writing source region out to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_src.reg
[Sun Jan 29 11:01:08 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (283, 199) - (356, 272)
[Sun Jan 29 11:01:08 2012] XMMSAS bgd. selection expression = annulus(27744.514600, 20412.198400, 2114.648061, 4229.296122, X, Y) && !ellipse(25425.799400, 24836.405000, 1257.208836, 1257.208836, 0.000000, X, Y) && !ellipse(23212.174200, 24018.696400, 523.360815, 523.360815, 0.000000, X, Y) && !ellipse(23915.182000, 25062.510000, 1413.272041, 636.836818, 26.983000, X, Y) && !ellipse(28951.249800, 24261.677200, 343.379210, 343.379210, 0.000000, X, Y) && !ellipse(29922.511475, 22394.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23555.367600, 25229.482400, 706.636820, 706.636820, 0.000000, X, Y) && !ellipse(26873.991600, 21434.959400, 441.885613, 441.885613, 0.000000, X, Y) && !ellipse(29293.394318, 24761.240723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27771.526800, 17560.813400, 357.358410, 357.358410, 0.000000, X, Y) && !ellipse(23984.574000, 19530.630000, 288.533608, 288.533608, 0.000000, X, Y) && !ellipse(24574.826000, 23271.446000, 238.971207, 238.971207, 0.000000, X, Y) && !ellipse(29070.329000, 21833.405200, 324.091209, 324.091209, 0.000000, X, Y) && !ellipse(25224.422800, 22933.642800, 318.798409, 318.798409, 0.000000, X, Y) && !ellipse(26468.907776, 25163.039581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24954.451000, 21706.848400, 257.736807, 257.736807, 0.000000, X, Y) && !ellipse(28901.326800, 22498.626800, 275.472008, 275.472008, 0.000000, X, Y) && !ellipse(24341.980800, 21542.016400, 318.244009, 318.244009, 0.000000, X, Y) && !ellipse(31816.092800, 23774.518200, 436.050413, 436.050413, 0.000000, X, Y) && !ellipse(31486.580600, 18568.817400, 421.032012, 421.032012, 0.000000, X, Y) && !ellipse(28468.001465, 21961.404800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23465.997955, 19898.404556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23168.196000, 25694.816000, 1235.368036, 1235.368036, 0.000000, X, Y) && !ellipse(31688.416595, 20938.708755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.597140, 22488.978200, 607.028017, 607.028017, 0.000000, X, Y) && !ellipse(25887.846649, 23279.298950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.649506, 23969.983582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22176.372000, 26700.172000, 2470.736071, 2470.736071, 0.000000, X, Y)
[Sun Jan 29 11:01:08 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6.gif
[Sun Jan 29 11:08:19 2012] Mean detx,y = (4128.75, 3367.82) 
[Sun Jan 29 11:08:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 11:09:44 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 11:09:45 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jan 29 11:09:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jan 29 17:27:52 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:52 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jan 29 17:27:53 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:53 2012] Using photon index=1.80, rate=0.0526, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6.arf
[Sun Jan 29 17:27:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:53 2012] Updating source flux to 7.3e-13
[Thu Feb  2 08:43:12 2012] Counts = 1711.780000, rescaling region sizes by 2.000000
[Thu Feb  2 08:43:12 2012] XMMSAS src. selection expression = ellipse(27744.514600, 20412.198400, 634.394418, 634.394418, 0.000000, X, Y)
[Thu Feb  2 08:43:12 2012] Not overwriting source region fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_src.reg
[Thu Feb  2 08:43:12 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (283, 199) - (356, 272)
[Thu Feb  2 08:43:12 2012] XMMSAS bgd. selection expression = annulus(27744.514600, 20412.198400, 2114.648061, 4229.296122, X, Y) && !ellipse(25425.799400, 24836.405000, 1257.208836, 1257.208836, 0.000000, X, Y) && !ellipse(23212.174200, 24018.696400, 523.360815, 523.360815, 0.000000, X, Y) && !ellipse(23915.182000, 25062.510000, 1413.272041, 636.836818, 26.983000, X, Y) && !ellipse(28951.249800, 24261.677200, 343.379210, 343.379210, 0.000000, X, Y) && !ellipse(29922.511475, 22394.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23555.367600, 25229.482400, 706.636820, 706.636820, 0.000000, X, Y) && !ellipse(26873.991600, 21434.959400, 441.885613, 441.885613, 0.000000, X, Y) && !ellipse(29293.394318, 24761.240723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27771.526800, 17560.813400, 357.358410, 357.358410, 0.000000, X, Y) && !ellipse(23984.574000, 19530.630000, 288.533608, 288.533608, 0.000000, X, Y) && !ellipse(24574.826000, 23271.446000, 238.971207, 238.971207, 0.000000, X, Y) && !ellipse(29070.329000, 21833.405200, 324.091209, 324.091209, 0.000000, X, Y) && !ellipse(25224.422800, 22933.642800, 318.798409, 318.798409, 0.000000, X, Y) && !ellipse(26468.907776, 25163.039581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24954.451000, 21706.848400, 257.736807, 257.736807, 0.000000, X, Y) && !ellipse(28901.326800, 22498.626800, 275.472008, 275.472008, 0.000000, X, Y) && !ellipse(24341.980800, 21542.016400, 318.244009, 318.244009, 0.000000, X, Y) && !ellipse(31816.092800, 23774.518200, 436.050413, 436.050413, 0.000000, X, Y) && !ellipse(31486.580600, 18568.817400, 421.032012, 421.032012, 0.000000, X, Y) && !ellipse(28468.001465, 21961.404800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23465.997955, 19898.404556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23168.196000, 25694.816000, 1235.368036, 1235.368036, 0.000000, X, Y) && !ellipse(31688.416595, 20938.708755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.597140, 22488.978200, 607.028017, 607.028017, 0.000000, X, Y) && !ellipse(25887.846649, 23279.298950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.649506, 23969.983582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22176.372000, 26700.172000, 2470.736071, 2470.736071, 0.000000, X, Y)
[Thu Feb  2 08:43:12 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6.gif
[Thu Feb  2 08:43:16 2012] ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:16 2012] Mean detx,y = (4128.75, 3367.82) 
[Thu Feb  2 08:43:16 2012] ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_src.img and ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:16 2012] ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:16 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Feb  2 08:43:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Feb  2 08:43:16 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:26 2012] fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6.rmf exists, delete to re-create
[Thu Feb  2 08:43:26 2012] fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Thu Feb  2 08:43:42 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:42 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Feb  2 08:43:43 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:43 2012] Using photon index=1.80, rate=0.0526, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src6.arf
[Thu Feb  2 08:43:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:43 2012] Updating source flux to 7.3e-13