[Sat Jan 28 21:46:44 2012] Detection parameters:
  Position = (325.4, 421.2) = 0 42 25.79 41 25 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 299.0 +/- 21.7
  Background counts = 21.0
  Rate = 0.02 +/- 0.001

[Sat Jan 28 21:46:46 2012] Off-axis axis estimate = 9.12'
[Sat Jan 28 21:47:50 2012] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:50 2012] Initial guess for spatial extent in simple fitting = 10.99"
[Sat Jan 28 21:47:50 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.983
[Sat Jan 28 21:47:50 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 10.99"
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src42.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src42.csv
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src42_1.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src42.csv
[Sat Jan 28 21:47:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:52 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sat Jan 28 21:47:52 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sat Jan 28 21:47:52 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sat Jan 28 21:49:03 2012] Spatial fit model total counts = 377.802000, observed total counts = 378.000000
[Sat Jan 28 21:49:03 2012] Offset between fit and detection position for source 52 = 0.107756 pixels
[Sat Jan 28 21:49:03 2012] 376.570000 total counts/ 160.275000 bgd. counts: snr = 17.084945
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.107756 pixels
  Position = (325.3, 421.3) = 0 42 25.83 41 25 53.0
  Extent = 6.5 (5.4-7.4)", rotation angle = 0
  Source counts = 216.3 +/- 19.4
  Background counts = 160.3
  Rate = 0.007 +/- 0.0006
[Sat Jan 28 21:49:03 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:49:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:49:03 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:49:03 2012] Source does appear to be extended
[Sat Jan 28 21:49:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:40 2012] Initial guess for spatial extent in simple fitting = 6.46"
[Sat Jan 28 21:49:40 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015
[Sat Jan 28 21:49:40 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 6.46"
[Sat Jan 28 21:49:41 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src41.ximg exists
[Sat Jan 28 21:49:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src41.csv
[Sat Jan 28 21:49:41 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Jan 28 21:49:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src41.csv
[Sat Jan 28 21:49:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Jan 28 21:49:43 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sat Jan 28 21:50:37 2012] Spatial fit model total counts = 377.997000, observed total counts = 378.000000
[Sat Jan 28 21:50:37 2012] Offset between fit and detection position for source 52 = 0.007747 pixels
[Sat Jan 28 21:50:37 2012] 376.736000 total counts/ 159.936000 bgd. counts: snr = 17.142974
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.007747 pixels
  Position = (325.3, 421.3) = 0 42 25.83 41 25 53.0
  Extent = 6.5 (5.3-7.4)", rotation angle = 0
  Source counts = 216.8 +/- 19.4
  Background counts = 159.9
  Rate = 0.007 +/- 0.0006
[Sat Jan 28 21:50:37 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:37 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:37 2012] Source does appear to be extended
[Sat Jan 28 21:50:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 11:01:09 2012] XMMSAS src. selection expression = ellipse(28255.735400, 36605.787200, 387.313239, 387.313239, 0.000000, X, Y)
[Sun Jan 29 11:01:09 2012] Writing source region out to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_src.reg
[Sun Jan 29 11:01:09 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (303, 399) - (348, 444)
[Sun Jan 29 11:01:10 2012] XMMSAS bgd. selection expression = annulus(28255.735400, 36605.787200, 645.522065, 1291.044131, X, Y) && !ellipse(29511.271200, 37608.037400, 470.697330, 470.697330, 0.000000, X, Y)
[Sun Jan 29 11:01:10 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52.gif
[Sun Jan 29 11:47:52 2012] Mean detx,y = (1244.19, -12572.43) 
[Sun Jan 29 11:47:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 11:48:08 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 11:48:08 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sun Jan 29 11:48:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sun Jan 29 17:27:52 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:52 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sun Jan 29 17:27:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:54 2012] Using photon index=1.80, rate=0.00667, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52.arf
[Sun Jan 29 17:27:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:54 2012] Updating source flux to 1.5e-13
[Thu Feb  2 08:43:14 2012] XMMSAS src. selection expression = ellipse(28255.735400, 36605.787200, 387.313239, 387.313239, 0.000000, X, Y)
[Thu Feb  2 08:43:14 2012] Not overwriting source region fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_src.reg
[Thu Feb  2 08:43:14 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (303, 399) - (348, 444)
[Thu Feb  2 08:43:14 2012] XMMSAS bgd. selection expression = annulus(28255.735400, 36605.787200, 645.522065, 1291.044131, X, Y) && !ellipse(29511.271200, 37608.037400, 470.697330, 470.697330, 0.000000, X, Y)
[Thu Feb  2 08:43:14 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52.gif
[Thu Feb  2 08:43:17 2012] ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_src.evt and ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:17 2012] Mean detx,y = (1244.19, -12572.43) 
[Thu Feb  2 08:43:17 2012] ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_src.img and ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:17 2012] ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:17 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Thu Feb  2 08:43:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Thu Feb  2 08:43:17 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:26 2012] fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52.rmf exists, delete to re-create
[Thu Feb  2 08:43:26 2012] fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52.arf exists, delete to re-create
[Thu Feb  2 08:43:42 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:42 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Thu Feb  2 08:43:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:44 2012] Using photon index=1.80, rate=0.00667, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src52.arf
[Thu Feb  2 08:43:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:44 2012] Updating source flux to 1.5e-13