[Sat Jan 28 21:46:44 2012] Detection parameters:
  Position = (414.8, 266.7) = 0 41 51.36 41 14 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.3 +/- 17.7
  Background counts = 21.1
  Rate = 0.005 +/- 0.0005

[Sat Jan 28 21:46:46 2012] Off-axis axis estimate = 8.74'
[Sat Jan 28 21:47:50 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:50 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Sat Jan 28 21:47:50 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.012
[Sat Jan 28 21:47:50 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 10.80"
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src65.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src65.csv
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src65_1.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src65.csv
[Sat Jan 28 21:47:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:52 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sat Jan 28 21:47:52 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sat Jan 28 21:47:52 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Sat Jan 28 21:49:03 2012] Warning: source 65 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 13.319620 pixels away
[Sat Jan 28 21:49:03 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:49:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:49:03 2012] Assessing source extent using major
[Sat Jan 28 21:49:03 2012] Source does appear to be extended
[Sat Jan 28 21:49:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:40 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:40 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Sat Jan 28 21:49:40 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.012
[Sat Jan 28 21:49:40 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 10.80"
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src63.ximg exists
[Sat Jan 28 21:49:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src63.csv
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src63_1.ximg exists
[Sat Jan 28 21:49:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src63.csv
[Sat Jan 28 21:49:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sat Jan 28 21:49:43 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Sat Jan 28 21:50:37 2012] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 13.339345 pixels away
[Sat Jan 28 21:50:37 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:37 2012] Assessing source extent using major
[Sat Jan 28 21:50:37 2012] Source does appear to be extended
[Sat Jan 28 21:50:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 11:01:10 2012] XMMSAS src. selection expression = ellipse(36035.942108, 23157.141052, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan 29 11:01:10 2012] Writing source region out to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_src.reg
[Sun Jan 29 11:01:10 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (377, 229) - (452, 304)
[Sun Jan 29 11:01:10 2012] XMMSAS bgd. selection expression = annulus(36035.942108, 23157.141052, 1087.500000, 2175.000000, X, Y)
[Sun Jan 29 11:01:10 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49.gif
[Sun Jan 29 11:55:36 2012] Mean detx,y = (11650.56, -1037.53) 
[Sun Jan 29 11:55:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 11:55:51 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 11:55:51 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sun Jan 29 11:55:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sun Jan 29 15:33:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan 29 15:33:34 2012] rmf not generated due to insufficient counts
[Sun Jan 29 17:27:53 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:53 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sun Jan 29 17:27:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:54 2012] Using photon index=1.80, rate=0.00524, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49.arf
[Sun Jan 29 17:27:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:54 2012] Updating source flux to 1.2e-13
[Sun Jan 29 17:34:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb  2 08:43:14 2012] XMMSAS src. selection expression = ellipse(36035.942108, 23157.141052, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb  2 08:43:14 2012] Not overwriting source region fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_src.reg
[Thu Feb  2 08:43:14 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (377, 229) - (452, 304)
[Thu Feb  2 08:43:14 2012] XMMSAS bgd. selection expression = annulus(36035.942108, 23157.141052, 1087.500000, 2175.000000, X, Y)
[Thu Feb  2 08:43:14 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49.gif
[Thu Feb  2 08:43:17 2012] ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_src.evt and ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:17 2012] Mean detx,y = (11650.56, -1037.53) 
[Thu Feb  2 08:43:17 2012] ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_src.img and ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:17 2012] ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:17 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Thu Feb  2 08:43:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Thu Feb  2 08:43:17 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb  2 08:43:26 2012] rmf not generated due to insufficient counts
[Thu Feb  2 08:43:26 2012] fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49.arf exists, delete to re-create
[Thu Feb  2 08:43:42 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:42 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Thu Feb  2 08:43:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:44 2012] Using photon index=1.80, rate=0.00524, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src49.arf
[Thu Feb  2 08:43:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:44 2012] Updating source flux to 1.2e-13
[Thu Feb  2 08:43:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting