[Sat Jan 28 21:46:44 2012] Detection parameters:
  Position = (372.5, 127.9) = 0 42 7.72 41 4 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.3 +/- 14.2
  Background counts = 16.7
  Rate = 0.003 +/- 0.0004

[Sat Jan 28 21:46:46 2012] Off-axis axis estimate = 13.48'
[Sat Jan 28 21:47:50 2012] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:50 2012] Initial guess for spatial extent in simple fitting = 13.17"
[Sat Jan 28 21:47:50 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984
[Sat Jan 28 21:47:50 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 13.17"
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src74.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src74.csv
[Sat Jan 28 21:47:51 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src74_1.ximg exists
[Sat Jan 28 21:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src74.csv
[Sat Jan 28 21:47:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:53 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Sat Jan 28 21:47:53 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Sat Jan 28 21:47:53 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Sat Jan 28 21:49:03 2012] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 14.543573 pixels away
[Sat Jan 28 21:49:03 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:49:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:49:03 2012] Assessing source extent using major
[Sat Jan 28 21:49:03 2012] Source does appear to be extended
[Sat Jan 28 21:49:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:40 2012] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:40 2012] Initial guess for spatial extent in simple fitting = 13.17"
[Sat Jan 28 21:49:40 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984
[Sat Jan 28 21:49:40 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 13.17"
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src72.ximg exists
[Sat Jan 28 21:49:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src72.csv
[Sat Jan 28 21:49:42 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src72_1.ximg exists
[Sat Jan 28 21:49:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src72.csv
[Sat Jan 28 21:49:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Sat Jan 28 21:49:43 2012] fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Sat Jan 28 21:49:43 2012] Fit fullrun_mos2_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Sat Jan 28 21:50:37 2012] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 16.858437 pixels away
[Sat Jan 28 21:50:37 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:37 2012] Assessing source extent using major
[Sat Jan 28 21:50:37 2012] Source does appear to be extended
[Sat Jan 28 21:50:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 11:01:10 2012] XMMSAS src. selection expression = ellipse(32361.604584, 11075.236420, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan 29 11:01:10 2012] Writing source region out to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_src.reg
[Sun Jan 29 11:01:10 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (335, 90) - (410, 165)
[Sun Jan 29 11:01:10 2012] XMMSAS bgd. selection expression = annulus(32361.604584, 11075.236420, 1087.500000, 2175.000000, X, Y)
[Sun Jan 29 11:01:10 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44.gif
[Sun Jan 29 11:59:13 2012] Mean detx,y = (10582.22, 11526.75) 
[Sun Jan 29 11:59:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 11:59:40 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 11:59:40 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun Jan 29 11:59:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sun Jan 29 15:54:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan 29 15:54:38 2012] rmf not generated due to insufficient counts
[Sun Jan 29 17:27:53 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:53 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun Jan 29 17:27:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:54 2012] Using photon index=1.80, rate=0.00328, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44.arf
[Sun Jan 29 17:27:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:54 2012] Updating source flux to 1.1e-13
[Sun Jan 29 17:34:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb  2 08:43:15 2012] XMMSAS src. selection expression = ellipse(32361.604584, 11075.236420, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb  2 08:43:15 2012] Not overwriting source region fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_src.reg
[Thu Feb  2 08:43:15 2012] Extracting stamp from image fullrun_mos2_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (335, 90) - (410, 165)
[Thu Feb  2 08:43:15 2012] XMMSAS bgd. selection expression = annulus(32361.604584, 11075.236420, 1087.500000, 2175.000000, X, Y)
[Thu Feb  2 08:43:15 2012] Writing fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44.gif
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_src.evt and ../../xmm0112570401/products/events/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:18 2012] Mean detx,y = (10582.22, 11526.75) 
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_src.img and ../../xmm0112570401/products/images/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:18 2012] Setting source spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu Feb  2 08:43:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Thu Feb  2 08:43:18 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb  2 08:43:26 2012] rmf not generated due to insufficient counts
[Thu Feb  2 08:43:26 2012] fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44.arf exists, delete to re-create
[Thu Feb  2 08:43:43 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:43 2012] Error reading totcts from fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu Feb  2 08:43:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:44 2012] Using photon index=1.80, rate=0.00328, arf fullrun_mos2_xmm0112570401_pi300-10000_pass1_cl_src44.arf
[Thu Feb  2 08:43:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:44 2012] Updating source flux to 1.1e-13
[Thu Feb  2 08:43:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting