[Sat Jan 28 21:46:42 2012] Detection parameters:
  Position = (275.9, 259.4) = 0 42 44.93 41 14 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.1 +/- 18.4
  Background counts = 91.8
  Rate = 0.003 +/- 0.0006

[Sat Jan 28 21:46:43 2012] Off-axis axis estimate = 3.27'
[Sat Jan 28 21:47:46 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:46 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Sat Jan 28 21:47:46 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.903
[Sat Jan 28 21:47:46 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 8.06"
[Sat Jan 28 21:47:48 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src80.ximg exists
[Sat Jan 28 21:47:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src80.csv
[Sat Jan 28 21:47:48 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src80_1.ximg exists
[Sat Jan 28 21:47:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src80.csv
[Sat Jan 28 21:47:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Sat Jan 28 21:47:49 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Sat Jan 28 21:48:46 2012] Spatial fit model total counts = 1129.830000, observed total counts = 1131.000000
[Sat Jan 28 21:48:46 2012] Offset between fit and detection position for source 90 = 0.456545 pixels
[Sat Jan 28 21:48:46 2012] 1101.114600 total counts/ 1063.390000 bgd. counts: snr = 1.156853
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 0.456545 pixels
  Position = (275.9, 258.9) = 0 42 44.91 41 14 6.7
  Extent = 2.7 (2.0-3.9)", rotation angle = 0
  Source counts = 37.7 +/- 33.2
  Background counts = 1063.4
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability