[Sat Jan 28 21:46:42 2012] Detection parameters:
  Position = (366.4, 273.8) = 0 42 10.02 41 15 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.4 +/- 17.4
  Background counts = 29.7
  Rate = 0.008 +/- 0.0008

[Sat Jan 28 21:46:43 2012] Off-axis axis estimate = 5.24'
[Sat Jan 28 21:47:46 2012] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:46 2012] Initial guess for spatial extent in simple fitting = 9.05"
[Sat Jan 28 21:47:46 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.864
[Sat Jan 28 21:47:46 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 9.05"
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src61.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src61.csv
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src61_1.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src61.csv
[Sat Jan 28 21:47:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sat Jan 28 21:47:49 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sat Jan 28 21:48:46 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 87 at 12.399099 pixels away
[Sat Jan 28 21:48:46 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:46 2012] Assessing source extent using major
[Sat Jan 28 21:48:46 2012] Source does appear to be extended
[Sat Jan 28 21:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:37 2012] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:37 2012] Initial guess for spatial extent in simple fitting = 9.05"
[Sat Jan 28 21:49:37 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.864
[Sat Jan 28 21:49:37 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 9.05"
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src57.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src57.csv
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src57_1.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src57.csv
[Sat Jan 28 21:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Sat Jan 28 21:49:40 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Sat Jan 28 21:50:23 2012] Spatial fit model total counts = 309.000000, observed total counts = 309.000000
[Sat Jan 28 21:50:23 2012] Offset between fit and detection position for source 87 = 0.165180 pixels
[Sat Jan 28 21:50:23 2012] 313.054000 total counts/ 190.589000 bgd. counts: snr = 8.870806
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 0.165180 pixels
  Position = (366.3, 273.6) = 0 42 10.05 41 15 10.5
  Extent = 5.0 (4.2-6.1)", rotation angle = 0
  Source counts = 122.5 +/- 17.7
  Background counts = 190.6
  Rate = 0.004 +/- 0.0005
[Sat Jan 28 21:50:23 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:23 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:23 2012] Source does appear to be extended
[Sat Jan 28 21:50:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 06:36:59 2012] XMMSAS src. selection expression = ellipse(31820.106800, 23759.012600, 300.616209, 300.616209, 0.000000, X, Y)
[Sun Jan 29 06:36:59 2012] Writing source region out to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_src.reg
[Sun Jan 29 06:36:59 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (349, 256) - (384, 291)
[Sun Jan 29 06:36:59 2012] XMMSAS bgd. selection expression = annulus(31820.106800, 23759.012600, 501.027014, 1002.054029, X, Y) && !ellipse(32098.674000, 21275.736000, 1535.008044, 1535.008044, 0.000000, X, Y)
[Sun Jan 29 06:36:59 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87.gif
[Sun Jan 29 07:05:02 2012] Mean detx,y = (-504.41, -7589.24) 
[Sun Jan 29 07:05:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 07:05:18 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 07:05:18 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Sun Jan 29 07:05:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Sun Jan 29 17:27:49 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:49 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Sun Jan 29 17:27:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:51 2012] Using photon index=1.80, rate=0.00377, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87.arf
[Sun Jan 29 17:27:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:51 2012] Updating source flux to 6.5e-14
[Thu Feb  2 08:42:59 2012] XMMSAS src. selection expression = ellipse(31820.106800, 23759.012600, 300.616209, 300.616209, 0.000000, X, Y)
[Thu Feb  2 08:42:59 2012] Not overwriting source region fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_src.reg
[Thu Feb  2 08:42:59 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (349, 256) - (384, 291)
[Thu Feb  2 08:42:59 2012] XMMSAS bgd. selection expression = annulus(31820.106800, 23759.012600, 501.027014, 1002.054029, X, Y) && !ellipse(32098.674000, 21275.736000, 1535.008044, 1535.008044, 0.000000, X, Y)
[Thu Feb  2 08:42:59 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87.gif
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_src.evt and ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:02 2012] Mean detx,y = (-504.41, -7589.24) 
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_src.img and ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:02 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Thu Feb  2 08:43:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87.rmf exists, delete to re-create
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87.arf exists, delete to re-create
[Thu Feb  2 08:43:39 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:39 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Thu Feb  2 08:43:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:41 2012] Using photon index=1.80, rate=0.00377, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src87.arf
[Thu Feb  2 08:43:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:41 2012] Updating source flux to 6.5e-14