[Sat Jan 28 21:46:41 2012] Detection parameters:
  Position = (288.7, 323.0) = 0 42 40.00 41 18 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.5 +/- 20.7
  Background counts = 50.6
  Rate = 0.007 +/- 0.0007

[Sat Jan 28 21:46:43 2012] Off-axis axis estimate = 1.91'
[Sat Jan 28 21:47:46 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:46 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Sat Jan 28 21:47:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.035
[Sat Jan 28 21:47:46 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 7.39"
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src63.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src63.csv
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src63_1.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src63.csv
[Sat Jan 28 21:47:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sat Jan 28 21:47:49 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Sat Jan 28 21:48:46 2012] Spatial fit model total counts = 676.824000, observed total counts = 677.000000
[Sat Jan 28 21:48:46 2012] Offset between fit and detection position for source 68 = 0.217890 pixels
[Sat Jan 28 21:48:46 2012] 662.512000 total counts/ 559.594000 bgd. counts: snr = 4.350657
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.217890 pixels
  Position = (288.5, 323.0) = 0 42 40.08 41 18 45.2
  Extent = 3.6 (2.8-4.4)", rotation angle = 0
  Source counts = 102.9 +/- 25.7
  Background counts = 559.6
  Rate = 0.003 +/- 0.0008
[Sat Jan 28 21:48:46 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:46 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:48:46 2012] Source does appear to be extended
[Sat Jan 28 21:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:37 2012] Initial guess for spatial extent in simple fitting = 3.57"
[Sat Jan 28 21:49:37 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.859
[Sat Jan 28 21:49:37 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 3.57"
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src59.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src59.csv
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src59_1.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src59.csv
[Sat Jan 28 21:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sat Jan 28 21:49:40 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Sat Jan 28 21:50:23 2012] Spatial fit model total counts = 677.000000, observed total counts = 677.000000
[Sat Jan 28 21:50:23 2012] Offset between fit and detection position for source 68 = 0.001037 pixels
[Sat Jan 28 21:50:23 2012] 662.704000 total counts/ 559.427000 bgd. counts: snr = 4.366484
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.001037 pixels
  Position = (288.5, 323.0) = 0 42 40.08 41 18 45.2
  Extent = 3.6 (2.8-4.3)", rotation angle = 0
  Source counts = 103.3 +/- 25.7
  Background counts = 559.4
  Rate = 0.003 +/- 0.0008
[Sat Jan 28 21:50:23 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:23 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:23 2012] Source does appear to be extended
[Sat Jan 28 21:50:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 06:36:59 2012] XMMSAS src. selection expression = ellipse(25047.158800, 28050.559400, 215.750326, 215.750326, 0.000000, X, Y)
[Sun Jan 29 06:36:59 2012] Writing source region out to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_src.reg
[Sun Jan 29 06:36:59 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (276, 311) - (301, 335)
[Sun Jan 29 06:36:59 2012] XMMSAS bgd. selection expression = annulus(25047.158800, 28050.559400, 359.583877, 719.167754, X, Y) && !ellipse(23515.352295, 27696.370300, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan 29 06:36:59 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68.gif
[Sun Jan 29 07:05:34 2012] Mean detx,y = (-3319.95, -75.57) 
[Sun Jan 29 07:05:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 07:05:41 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 07:05:41 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sun Jan 29 07:05:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sun Jan 29 17:27:49 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:50 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sun Jan 29 17:27:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:51 2012] Using photon index=1.80, rate=0.00318, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68.arf
[Sun Jan 29 17:27:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:51 2012] Updating source flux to 4.8e-14
[Thu Feb  2 08:42:59 2012] XMMSAS src. selection expression = ellipse(25047.158800, 28050.559400, 215.750326, 215.750326, 0.000000, X, Y)
[Thu Feb  2 08:42:59 2012] Not overwriting source region fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_src.reg
[Thu Feb  2 08:42:59 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (276, 311) - (301, 335)
[Thu Feb  2 08:42:59 2012] XMMSAS bgd. selection expression = annulus(25047.158800, 28050.559400, 359.583877, 719.167754, X, Y) && !ellipse(23515.352295, 27696.370300, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 08:42:59 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68.gif
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_src.evt and ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:03 2012] Mean detx,y = (-3319.95, -75.57) 
[Thu Feb  2 08:43:03 2012] ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_src.img and ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:03 2012] ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:03 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Thu Feb  2 08:43:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Thu Feb  2 08:43:03 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68.rmf exists, delete to re-create
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68.arf exists, delete to re-create
[Thu Feb  2 08:43:39 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:39 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Thu Feb  2 08:43:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:41 2012] Using photon index=1.80, rate=0.00318, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src68.arf
[Thu Feb  2 08:43:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:41 2012] Updating source flux to 4.8e-14