[Sat Jan 28 21:46:41 2012] Detection parameters: Position = (265.4, 316.2) = 0 42 48.98 41 18 16.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 329.2 +/- 25.6 Background counts = 61.3 Rate = 0.01 +/- 0.0008 [Sat Jan 28 21:46:43 2012] Off-axis axis estimate = 2.72' [Sat Jan 28 21:47:46 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting [Sat Jan 28 21:47:46 2012] Initial guess for spatial extent in simple fitting = 7.79" [Sat Jan 28 21:47:46 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.953 [Sat Jan 28 21:47:46 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 7.79" [Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src52.ximg exists [Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src52.csv [Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src52_1.ximg exists [Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src52.csv [Sat Jan 28 21:47:47 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src52_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src52.ximg exists [Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists [Sat Jan 28 21:47:49 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly [Sat Jan 28 21:48:46 2012] Warning, spatial fit 52 centroid is now closest to src. 51 [Sat Jan 28 21:48:46 2012] Spatial fit model total counts = 1270.900000, observed total counts = 1271.000000 [Sat Jan 28 21:48:46 2012] Offset between fit and detection position for source 52 = 1.162512 pixels [Sat Jan 28 21:48:46 2012] Warning, changing simple spatial fit ID from 52 to 89 [Sat Jan 28 21:48:46 2012] 1163.593700 total counts/ 1145.220000 bgd. counts: snr = 0.542940 Spatial fit parameters: Offset between fit and detection position for source 52 = 1.162512 pixels Position = (265.0, 315.1) = 0 42 49.14 41 18 10.8 Extent = 2.6 (1.9-9.8)", rotation angle = 0 Source counts = 18.4 +/- 34.1 Background counts = 1145.2 Rate = 0.0006 +/- 0.001 Deleting source due to low Poisson probability