[Sat Jan 28 21:46:39 2012] Detection parameters:
  Position = (277.0, 288.1) = 0 42 44.50 41 16 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4443.1 +/- 85.6
  Background counts = 95.3
  Rate = 0.1 +/- 0.002

[Sat Jan 28 21:46:43 2012] Off-axis axis estimate = 1.73'
[Sat Jan 28 21:47:46 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:46 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jan 28 21:47:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Jan 28 21:47:46 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.29"
[Sat Jan 28 21:47:46 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jan 28 21:47:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src5.csv
[Sat Jan 28 21:47:46 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jan 28 21:47:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src5.csv
[Sat Jan 28 21:47:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:48 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jan 28 21:47:48 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jan 28 21:47:48 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jan 28 21:48:46 2012] Spatial fit model total counts = 13461.000000, observed total counts = 13453.000000
[Sat Jan 28 21:48:46 2012] Offset between fit and detection position for source 5 = 1.763092 pixels
[Sat Jan 28 21:48:46 2012] Warning, changing simple spatial fit ID from 5 to 2
[Sat Jan 28 21:48:46 2012] 13042.750000 total counts/ 6458.490000 bgd. counts: snr = 81.929721
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.763092 pixels
  Position = (278.8, 288.2) = 0 42 43.82 41 16 14.1
  Extent = 14.2 (14.2-28.5)", rotation angle = 0
  Source counts = 6584.3 +/- 114.2
  Background counts = 6458.5
  Rate = 0.2 +/- 0.004
[Sat Jan 28 21:48:46 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:46 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:48:46 2012] Source does appear to be extended
[Sat Jan 28 21:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:48:46 2012] Source is confused with source 1
[Sat Jan 28 21:49:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:37 2012] Initial guess for spatial extent in simple fitting = 14.23"
[Sat Jan 28 21:49:37 2012] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.125
[Sat Jan 28 21:49:37 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.23"
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src5.csv
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src5.csv
[Sat Jan 28 21:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:39 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jan 28 21:49:39 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jan 28 21:49:39 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jan 28 21:50:23 2012] Warning, spatial fit 5 centroid is now closest to src. 47
[Sat Jan 28 21:50:23 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:23 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:23 2012] Source does appear to be extended
[Sat Jan 28 21:50:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 06:36:57 2012] Counts = 6584.260000, rescaling region sizes by 2.000000
[Sun Jan 29 06:36:57 2012] XMMSAS src. selection expression = ellipse(24203.298000, 25027.947200, 1707.960049, 1707.960049, 0.000000, X, Y)
[Sun Jan 29 06:36:57 2012] Writing source region out to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_src.reg
[Sun Jan 29 06:36:57 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (181, 190) - (377, 386)
[Sun Jan 29 06:36:57 2012] XMMSAS bgd. selection expression = annulus(24203.298000, 25027.947200, 5693.200164, 11386.400328, X, Y) && !ellipse(25417.475200, 24824.834600, 1275.372037, 1275.372037, 0.000000, X, Y) && !ellipse(24608.823456, 24906.327454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18196.892521, 23396.240208, 434.183917, 402.243937, 47.213372, X, Y) && !ellipse(23197.496300, 23740.176000, 987.272028, 987.272028, 0.000000, X, Y) && !ellipse(22281.223400, 28245.981800, 392.119211, 392.119211, 0.000000, X, Y) && !ellipse(21731.014200, 24822.250600, 340.770410, 340.770410, 0.000000, X, Y) && !ellipse(27733.333618, 20428.449295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31159.919400, 27874.409200, 461.968013, 461.968013, 0.000000, X, Y) && !ellipse(27101.481700, 25181.247600, 370.232811, 370.232811, 0.000000, X, Y) && !ellipse(29915.952841, 22382.183312, 474.437172, 384.061891, 98.796507, X, Y) && !ellipse(28943.042000, 24246.778000, 399.793612, 339.026410, 117.491400, X, Y) && !ellipse(22274.250000, 24358.016000, 320.941609, 320.941609, 0.000000, X, Y) && !ellipse(26854.014360, 21430.780000, 490.782414, 490.782414, 0.000000, X, Y) && !ellipse(23692.920000, 25213.180400, 1166.680034, 1166.680034, 0.000000, X, Y) && !ellipse(20672.269160, 28740.784800, 428.768812, 428.768812, 0.000000, X, Y) && !ellipse(21058.842742, 18891.044254, 381.892372, 289.541906, 17.518617, X, Y) && !ellipse(20623.198400, 24869.165800, 389.583211, 389.583211, 0.000000, X, Y) && !ellipse(13246.494156, 18387.480484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.713320, 20422.603400, 360.104810, 360.104810, 0.000000, X, Y) && !ellipse(17323.803800, 14379.814000, 668.761619, 392.609611, 33.648732, X, Y) && !ellipse(26351.116200, 27343.591200, 390.228011, 390.228011, 0.000000, X, Y) && !ellipse(19898.756092, 24070.992240, 466.572719, 373.348470, 56.445885, X, Y) && !ellipse(29277.253540, 24770.700200, 297.211209, 297.211209, 0.000000, X, Y) && !ellipse(12178.107712, 23247.454529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27756.662268, 17568.630369, 404.070304, 296.925453, 353.649670, X, Y) && !ellipse(19724.438800, 27283.804600, 357.457610, 357.457610, 0.000000, X, Y) && !ellipse(30722.637000, 20657.920600, 311.264009, 311.264009, 0.000000, X, Y) && !ellipse(12828.377487, 21629.337631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24008.047000, 19512.169420, 353.008010, 353.008010, 0.000000, X, Y) && !ellipse(16328.974000, 29887.197200, 560.040016, 452.328013, 311.708800, X, Y) && !ellipse(30585.449840, 26361.350400, 360.161610, 360.161610, 0.000000, X, Y) && !ellipse(19856.278007, 31163.710619, 426.503329, 343.619008, 339.965733, X, Y) && !ellipse(23195.312578, 35986.657787, 590.230623, 382.921173, 351.749239, X, Y) && !ellipse(29053.268200, 21807.048000, 309.124809, 309.124809, 0.000000, X, Y) && !ellipse(21637.086334, 36673.122589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32371.745800, 27458.479400, 649.964019, 649.964019, 0.000000, X, Y) && !ellipse(13983.501000, 14918.304600, 626.344018, 301.633609, 40.966552, X, Y) && !ellipse(24567.778600, 23263.671600, 274.751208, 274.751208, 0.000000, X, Y) && !ellipse(28243.733160, 28649.587200, 375.815548, 375.815548, 0.000000, X, Y) && !ellipse(26491.385254, 25159.134033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25206.305939, 22957.429749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27069.888200, 29128.758600, 343.441610, 343.441610, 0.000000, X, Y) && !ellipse(14308.918732, 27783.872101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28895.976000, 22498.580000, 268.154408, 268.154408, 0.000000, X, Y) && !ellipse(26167.368600, 29661.223800, 406.980012, 406.980012, 0.000000, X, Y) && !ellipse(24953.604800, 21705.596000, 308.491209, 308.491209, 0.000000, X, Y) && !ellipse(20969.681000, 24142.223297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28457.792877, 21885.748413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18624.191800, 20929.452200, 333.389610, 333.389610, 0.000000, X, Y) && !ellipse(24332.581600, 21548.636400, 396.651211, 396.651211, 0.000000, X, Y) && !ellipse(31479.168427, 18551.074097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19870.289480, 17859.243600, 557.486416, 557.486416, 0.000000, X, Y) && !ellipse(28218.779175, 36593.052216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31998.120453, 26847.323792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31820.106800, 23759.012600, 400.821612, 400.821612, 0.000000, X, Y) && !ellipse(24017.305200, 26756.839200, 337.796010, 337.796010, 0.000000, X, Y) && !ellipse(25047.158800, 28050.559400, 287.667102, 287.667102, 0.000000, X, Y) && !ellipse(22789.069031, 24739.737640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23437.732513, 19900.370605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32065.336540, 30552.092600, 380.416811, 380.416811, 0.000000, X, Y) && !ellipse(19115.932000, 25320.130000, 1454.104042, 1454.104042, 0.000000, X, Y) && !ellipse(36031.423248, 23170.649841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24741.004820, 30870.815000, 411.420267, 411.420267, 0.000000, X, Y) && !ellipse(23530.556000, 25700.004000, 1224.992035, 1224.992035, 0.000000, X, Y) && !ellipse(23202.295135, 23014.993439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22171.092377, 25692.850677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.004600, 31708.523400, 681.476820, 681.476820, 0.000000, X, Y) && !ellipse(22527.761047, 26131.883667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22543.701843, 26804.553925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32098.674000, 21275.736000, 1535.008044, 1535.008044, 0.000000, X, Y) && !ellipse(27145.502000, 23826.498000, 1089.472031, 1089.472031, 0.000000, X, Y) && !ellipse(28984.659546, 14822.169083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22999.087158, 26651.722473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22093.224350, 26939.562164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23515.352295, 27696.370300, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan 29 06:36:57 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5.gif
[Sun Jan 29 06:42:57 2012] Mean detx,y = (-61.92, -288.36) 
[Sun Jan 29 06:42:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 06:45:50 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 06:45:50 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jan 29 06:45:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jan 29 17:27:48 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:48 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jan 29 17:27:50 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:50 2012] Using photon index=1.80, rate=0.203, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5.arf
[Sun Jan 29 17:27:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:50 2012] Updating source flux to 1.8e-12
[Sun Jan 29 17:27:59 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Thu Feb  2 08:42:57 2012] Counts = 6584.260000, rescaling region sizes by 2.000000
[Thu Feb  2 08:42:57 2012] XMMSAS src. selection expression = ellipse(24203.298000, 25027.947200, 1707.960049, 1707.960049, 0.000000, X, Y)
[Thu Feb  2 08:42:57 2012] Not overwriting source region fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_src.reg
[Thu Feb  2 08:42:57 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (181, 190) - (377, 386)
[Thu Feb  2 08:42:57 2012] XMMSAS bgd. selection expression = annulus(24203.298000, 25027.947200, 5693.200164, 11386.400328, X, Y) && !ellipse(25417.475200, 24824.834600, 1275.372037, 1275.372037, 0.000000, X, Y) && !ellipse(24608.823456, 24906.327454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18196.892521, 23396.240208, 434.183917, 402.243937, 47.213372, X, Y) && !ellipse(23197.496300, 23740.176000, 987.272028, 987.272028, 0.000000, X, Y) && !ellipse(22281.223400, 28245.981800, 392.119211, 392.119211, 0.000000, X, Y) && !ellipse(21731.014200, 24822.250600, 340.770410, 340.770410, 0.000000, X, Y) && !ellipse(27733.333618, 20428.449295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31159.919400, 27874.409200, 461.968013, 461.968013, 0.000000, X, Y) && !ellipse(27101.481700, 25181.247600, 370.232811, 370.232811, 0.000000, X, Y) && !ellipse(29915.952841, 22382.183312, 474.437172, 384.061891, 98.796507, X, Y) && !ellipse(28943.042000, 24246.778000, 399.793612, 339.026410, 117.491400, X, Y) && !ellipse(22274.250000, 24358.016000, 320.941609, 320.941609, 0.000000, X, Y) && !ellipse(26854.014360, 21430.780000, 490.782414, 490.782414, 0.000000, X, Y) && !ellipse(23692.920000, 25213.180400, 1166.680034, 1166.680034, 0.000000, X, Y) && !ellipse(20672.269160, 28740.784800, 428.768812, 428.768812, 0.000000, X, Y) && !ellipse(21058.842742, 18891.044254, 381.892372, 289.541906, 17.518617, X, Y) && !ellipse(20623.198400, 24869.165800, 389.583211, 389.583211, 0.000000, X, Y) && !ellipse(13246.494156, 18387.480484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.713320, 20422.603400, 360.104810, 360.104810, 0.000000, X, Y) && !ellipse(17323.803800, 14379.814000, 668.761619, 392.609611, 33.648732, X, Y) && !ellipse(26351.116200, 27343.591200, 390.228011, 390.228011, 0.000000, X, Y) && !ellipse(19898.756092, 24070.992240, 466.572719, 373.348470, 56.445885, X, Y) && !ellipse(29277.253540, 24770.700200, 297.211209, 297.211209, 0.000000, X, Y) && !ellipse(12178.107712, 23247.454529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27756.662268, 17568.630369, 404.070304, 296.925453, 353.649670, X, Y) && !ellipse(19724.438800, 27283.804600, 357.457610, 357.457610, 0.000000, X, Y) && !ellipse(30722.637000, 20657.920600, 311.264009, 311.264009, 0.000000, X, Y) && !ellipse(12828.377487, 21629.337631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24008.047000, 19512.169420, 353.008010, 353.008010, 0.000000, X, Y) && !ellipse(16328.974000, 29887.197200, 560.040016, 452.328013, 311.708800, X, Y) && !ellipse(30585.449840, 26361.350400, 360.161610, 360.161610, 0.000000, X, Y) && !ellipse(19856.278007, 31163.710619, 426.503329, 343.619008, 339.965733, X, Y) && !ellipse(23195.312578, 35986.657787, 590.230623, 382.921173, 351.749239, X, Y) && !ellipse(29053.268200, 21807.048000, 309.124809, 309.124809, 0.000000, X, Y) && !ellipse(21637.086334, 36673.122589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32371.745800, 27458.479400, 649.964019, 649.964019, 0.000000, X, Y) && !ellipse(13983.501000, 14918.304600, 626.344018, 301.633609, 40.966552, X, Y) && !ellipse(24567.778600, 23263.671600, 274.751208, 274.751208, 0.000000, X, Y) && !ellipse(28243.733160, 28649.587200, 375.815548, 375.815548, 0.000000, X, Y) && !ellipse(26491.385254, 25159.134033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25206.305939, 22957.429749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27069.888200, 29128.758600, 343.441610, 343.441610, 0.000000, X, Y) && !ellipse(14308.918732, 27783.872101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28895.976000, 22498.580000, 268.154408, 268.154408, 0.000000, X, Y) && !ellipse(26167.368600, 29661.223800, 406.980012, 406.980012, 0.000000, X, Y) && !ellipse(24953.604800, 21705.596000, 308.491209, 308.491209, 0.000000, X, Y) && !ellipse(20969.681000, 24142.223297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28457.792877, 21885.748413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18624.191800, 20929.452200, 333.389610, 333.389610, 0.000000, X, Y) && !ellipse(24332.581600, 21548.636400, 396.651211, 396.651211, 0.000000, X, Y) && !ellipse(31479.168427, 18551.074097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19870.289480, 17859.243600, 557.486416, 557.486416, 0.000000, X, Y) && !ellipse(28218.779175, 36593.052216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31998.120453, 26847.323792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31820.106800, 23759.012600, 400.821612, 400.821612, 0.000000, X, Y) && !ellipse(24017.305200, 26756.839200, 337.796010, 337.796010, 0.000000, X, Y) && !ellipse(25047.158800, 28050.559400, 287.667102, 287.667102, 0.000000, X, Y) && !ellipse(22789.069031, 24739.737640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23437.732513, 19900.370605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32065.336540, 30552.092600, 380.416811, 380.416811, 0.000000, X, Y) && !ellipse(19115.932000, 25320.130000, 1454.104042, 1454.104042, 0.000000, X, Y) && !ellipse(36031.423248, 23170.649841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24741.004820, 30870.815000, 411.420267, 411.420267, 0.000000, X, Y) && !ellipse(23530.556000, 25700.004000, 1224.992035, 1224.992035, 0.000000, X, Y) && !ellipse(23202.295135, 23014.993439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22171.092377, 25692.850677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.004600, 31708.523400, 681.476820, 681.476820, 0.000000, X, Y) && !ellipse(22527.761047, 26131.883667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22543.701843, 26804.553925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32098.674000, 21275.736000, 1535.008044, 1535.008044, 0.000000, X, Y) && !ellipse(27145.502000, 23826.498000, 1089.472031, 1089.472031, 0.000000, X, Y) && !ellipse(28984.659546, 14822.169083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22999.087158, 26651.722473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22093.224350, 26939.562164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23515.352295, 27696.370300, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 08:42:57 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5.gif
[Thu Feb  2 08:43:01 2012] ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:01 2012] Mean detx,y = (-61.92, -288.36) 
[Thu Feb  2 08:43:01 2012] ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_src.img and ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:01 2012] ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:01 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Feb  2 08:43:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Feb  2 08:43:01 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5.rmf exists, delete to re-create
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Thu Feb  2 08:43:38 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:38 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Feb  2 08:43:40 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:40 2012] Using photon index=1.80, rate=0.203, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src5.arf
[Thu Feb  2 08:43:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:40 2012] Updating source flux to 1.8e-12
[Thu Feb  2 08:43:50 2012] Flag c found in src. 5 procflags, skipping spectral fitting