[Sat Jan 28 21:46:41 2012] Detection parameters:
  Position = (324.9, 421.2) = 0 42 25.99 41 25 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 277.0 +/- 21.3
  Background counts = 21.0
  Rate = 0.008 +/- 0.0006

[Sat Jan 28 21:46:43 2012] Off-axis axis estimate = 9.10'
[Sat Jan 28 21:47:46 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:46 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Sat Jan 28 21:47:46 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Sat Jan 28 21:47:46 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 10.98"
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src59.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src59.csv
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src59_1.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src59.csv
[Sat Jan 28 21:47:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sat Jan 28 21:47:49 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Sat Jan 28 21:48:46 2012] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 13.767866 pixels away
[Sat Jan 28 21:48:46 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:46 2012] Assessing source extent using major
[Sat Jan 28 21:48:46 2012] Source does appear to be extended
[Sat Jan 28 21:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:37 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:37 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Sat Jan 28 21:49:37 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Sat Jan 28 21:49:37 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 10.98"
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src55.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src55.csv
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src55_1.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src55.csv
[Sat Jan 28 21:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Sat Jan 28 21:49:40 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Sat Jan 28 21:50:23 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 12.063872 pixels away
[Sat Jan 28 21:50:23 2012] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 50.577781 pixels away
[Sat Jan 28 21:50:23 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:23 2012] Assessing source extent using major
[Sat Jan 28 21:50:23 2012] Source does appear to be extended
[Sat Jan 28 21:50:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 06:36:59 2012] XMMSAS src. selection expression = ellipse(28218.779175, 36593.052216, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan 29 06:36:59 2012] Writing source region out to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_src.reg
[Sun Jan 29 06:36:59 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (287, 384) - (362, 459)
[Sun Jan 29 06:36:59 2012] XMMSAS bgd. selection expression = annulus(28218.779175, 36593.052216, 1087.500000, 2175.000000, X, Y) && !ellipse(29493.817200, 37587.870400, 382.285611, 382.285611, 0.000000, X, Y)
[Sun Jan 29 06:36:59 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48.gif
[Sun Jan 29 07:04:35 2012] Mean detx,y = (-12302.30, -1420.02) 
[Sun Jan 29 07:04:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 07:04:44 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 07:04:44 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Jan 29 07:04:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sun Jan 29 10:23:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan 29 10:23:45 2012] rmf not generated due to insufficient counts
[Sun Jan 29 17:27:49 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:49 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Jan 29 17:27:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:51 2012] Using photon index=1.80, rate=0.00795, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48.arf
[Sun Jan 29 17:27:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:51 2012] Updating source flux to 1.6e-13
[Sun Jan 29 17:27:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb  2 08:42:59 2012] XMMSAS src. selection expression = ellipse(28218.779175, 36593.052216, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb  2 08:42:59 2012] Not overwriting source region fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_src.reg
[Thu Feb  2 08:42:59 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (287, 384) - (362, 459)
[Thu Feb  2 08:42:59 2012] XMMSAS bgd. selection expression = annulus(28218.779175, 36593.052216, 1087.500000, 2175.000000, X, Y) && !ellipse(29493.817200, 37587.870400, 382.285611, 382.285611, 0.000000, X, Y)
[Thu Feb  2 08:42:59 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48.gif
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_src.evt and ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:02 2012] Mean detx,y = (-12302.30, -1420.02) 
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_src.img and ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:02 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu Feb  2 08:43:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb  2 08:43:12 2012] rmf not generated due to insufficient counts
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48.arf exists, delete to re-create
[Thu Feb  2 08:43:39 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:39 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu Feb  2 08:43:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:41 2012] Using photon index=1.80, rate=0.00795, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src48.arf
[Thu Feb  2 08:43:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:41 2012] Updating source flux to 1.6e-13
[Thu Feb  2 08:43:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting