[Sat Jan 28 21:46:40 2012] Detection parameters:
  Position = (317.8, 128.0) = 0 42 28.78 41 4 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 450.8 +/- 26.3
  Background counts = 19.9
  Rate = 0.01 +/- 0.0008

[Sat Jan 28 21:46:43 2012] Off-axis axis estimate = 12.44'
[Sat Jan 28 21:47:46 2012] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:46 2012] Initial guess for spatial extent in simple fitting = 12.65"
[Sat Jan 28 21:47:46 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.904
[Sat Jan 28 21:47:46 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 12.65"
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src47.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src47.csv
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src47_1.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src47.csv
[Sat Jan 28 21:47:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sat Jan 28 21:47:49 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sat Jan 28 21:48:46 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 16.626125 pixels away
[Sat Jan 28 21:48:46 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:46 2012] Assessing source extent using major
[Sat Jan 28 21:48:46 2012] Source does appear to be extended
[Sat Jan 28 21:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:37 2012] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:37 2012] Initial guess for spatial extent in simple fitting = 12.65"
[Sat Jan 28 21:49:37 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.904
[Sat Jan 28 21:49:37 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 12.65"
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src45.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src45.csv
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src45_1.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src45.csv
[Sat Jan 28 21:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sat Jan 28 21:49:40 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Sat Jan 28 21:50:23 2012] Spatial fit model total counts = 554.998000, observed total counts = 555.000000
[Sat Jan 28 21:50:23 2012] Offset between fit and detection position for source 29 = 0.105976 pixels
[Sat Jan 28 21:50:23 2012] 555.765000 total counts/ 293.598000 bgd. counts: snr = 15.300354
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.105976 pixels
  Position = (317.7, 127.9) = 0 42 28.82 41 4 36.7
  Extent = 5.6 (4.9-6.3)", rotation angle = 0
  Source counts = 262.2 +/- 23.6
  Background counts = 293.6
  Rate = 0.008 +/- 0.0007
[Sat Jan 28 21:50:23 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:23 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:23 2012] Source does appear to be extended
[Sat Jan 28 21:50:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 06:36:58 2012] XMMSAS src. selection expression = ellipse(27591.650380, 11080.020400, 337.711810, 337.711810, 0.000000, X, Y)
[Sun Jan 29 06:36:58 2012] Writing source region out to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_src.reg
[Sun Jan 29 06:36:58 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (298, 109) - (337, 147)
[Sun Jan 29 06:36:58 2012] XMMSAS bgd. selection expression = annulus(27591.650380, 11080.020400, 562.853016, 1125.706032, X, Y) && !ellipse(26659.749238, 9710.377800, 725.671221, 315.534409, 353.906120, X, Y)
[Sun Jan 29 06:36:58 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29.gif
[Sun Jan 29 07:02:43 2012] Mean detx,y = (12773.66, -6037.84) 
[Sun Jan 29 07:02:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 07:02:51 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 07:02:51 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Jan 29 07:02:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Jan 29 17:27:49 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:49 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Jan 29 17:27:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:51 2012] Using photon index=1.80, rate=0.00808, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29.arf
[Sun Jan 29 17:27:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:51 2012] Updating source flux to 2.2e-13
[Thu Feb  2 08:42:59 2012] XMMSAS src. selection expression = ellipse(27591.650380, 11080.020400, 337.711810, 337.711810, 0.000000, X, Y)
[Thu Feb  2 08:42:59 2012] Not overwriting source region fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_src.reg
[Thu Feb  2 08:42:59 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (298, 109) - (337, 147)
[Thu Feb  2 08:42:59 2012] XMMSAS bgd. selection expression = annulus(27591.650380, 11080.020400, 562.853016, 1125.706032, X, Y) && !ellipse(26659.749238, 9710.377800, 725.671221, 315.534409, 353.906120, X, Y)
[Thu Feb  2 08:42:59 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29.gif
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:02 2012] Mean detx,y = (12773.66, -6037.84) 
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_src.img and ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:02 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Feb  2 08:43:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29.rmf exists, delete to re-create
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Thu Feb  2 08:43:39 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:39 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Feb  2 08:43:40 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:40 2012] Using photon index=1.80, rate=0.00808, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src29.arf
[Thu Feb  2 08:43:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:40 2012] Updating source flux to 2.2e-13