[Sat Jan 28 21:46:40 2012] Detection parameters:
  Position = (372.7, 316.0) = 0 42 7.58 41 18 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 750.2 +/- 35.9
  Background counts = 22.0
  Rate = 0.02 +/- 0.001

[Sat Jan 28 21:46:43 2012] Off-axis axis estimate = 5.53'
[Sat Jan 28 21:47:46 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:46 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Sat Jan 28 21:47:46 2012] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.062
[Sat Jan 28 21:47:46 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 9.19"
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src39.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src39.csv
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src39.csv
[Sat Jan 28 21:47:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Jan 28 21:47:49 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sat Jan 28 21:48:46 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 10.780590 pixels away
[Sat Jan 28 21:48:46 2012] Spatial fit model total counts = 879.827000, observed total counts = 880.000000
[Sat Jan 28 21:48:46 2012] Offset between fit and detection position for source 28 = 0.323106 pixels
[Sat Jan 28 21:48:46 2012] Warning, changing simple spatial fit ID from 39 to 60
[Sat Jan 28 21:48:46 2012] 907.792000 total counts/ 579.547000 bgd. counts: snr = 13.634957
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.323106 pixels
  Position = (373.0, 315.9) = 0 42 7.46 41 18 14.1
  Extent = 6.5 (5.6-7.3)", rotation angle = 0
  Source counts = 328.2 +/- 30.1
  Background counts = 579.5
  Rate = 0.01 +/- 0.0009
[Sat Jan 28 21:48:46 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:46 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:48:46 2012] Source does appear to be extended
[Sat Jan 28 21:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:37 2012] Initial guess for spatial extent in simple fitting = 6.49"
[Sat Jan 28 21:49:37 2012] source mask rpix=1.5, npix_max = 15, mask sum = 15, frac = 0.945
[Sat Jan 28 21:49:37 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 6.49"
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src37.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src37.csv
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src37_1.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src37.csv
[Sat Jan 28 21:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sat Jan 28 21:49:40 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sat Jan 28 21:50:23 2012] Spatial fit model total counts = 916.326000, observed total counts = 914.000000
[Sat Jan 28 21:50:23 2012] Offset between fit and detection position for source 28 = 0.437033 pixels
[Sat Jan 28 21:50:23 2012] 899.115000 total counts/ 333.958000 bgd. counts: snr = 30.925960
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.437033 pixels
  Position = (372.6, 316.2) = 0 42 7.58 41 18 15.4
  Extent = 8.1 (7.7-8.7)", rotation angle = 0
  Source counts = 565.2 +/- 30.0
  Background counts = 334.0
  Rate = 0.02 +/- 0.0009
[Sat Jan 28 21:50:23 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:23 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 21:50:23 2012] Source does appear to be extended
[Sat Jan 28 21:50:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 06:36:58 2012] XMMSAS src. selection expression = ellipse(32371.745800, 27458.479400, 487.473014, 487.473014, 0.000000, X, Y)
[Sun Jan 29 06:36:58 2012] Writing source region out to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_src.reg
[Sun Jan 29 06:36:58 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (345, 288) - (401, 344)
[Sun Jan 29 06:36:58 2012] XMMSAS bgd. selection expression = annulus(32371.745800, 27458.479400, 812.455023, 1624.910047, X, Y) && !ellipse(31159.919400, 27874.409200, 461.968013, 461.968013, 0.000000, X, Y) && !ellipse(30585.449840, 26361.350400, 360.161610, 360.161610, 0.000000, X, Y) && !ellipse(31998.120453, 26847.323792, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan 29 06:36:58 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28.gif
[Sun Jan 29 07:00:59 2012] Mean detx,y = (-4223.62, -7367.09) 
[Sun Jan 29 07:00:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 07:01:10 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 07:01:10 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Jan 29 07:01:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun Jan 29 17:27:49 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:49 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Jan 29 17:27:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:51 2012] Using photon index=1.80, rate=0.0174, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28.arf
[Sun Jan 29 17:27:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:51 2012] Updating source flux to 2.9e-13
[Thu Feb  2 08:42:58 2012] XMMSAS src. selection expression = ellipse(32371.745800, 27458.479400, 487.473014, 487.473014, 0.000000, X, Y)
[Thu Feb  2 08:42:58 2012] Not overwriting source region fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_src.reg
[Thu Feb  2 08:42:58 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (345, 288) - (401, 344)
[Thu Feb  2 08:42:58 2012] XMMSAS bgd. selection expression = annulus(32371.745800, 27458.479400, 812.455023, 1624.910047, X, Y) && !ellipse(31159.919400, 27874.409200, 461.968013, 461.968013, 0.000000, X, Y) && !ellipse(30585.449840, 26361.350400, 360.161610, 360.161610, 0.000000, X, Y) && !ellipse(31998.120453, 26847.323792, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 08:42:58 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28.gif
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:02 2012] Mean detx,y = (-4223.62, -7367.09) 
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_src.img and ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:02 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Feb  2 08:43:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Feb  2 08:43:02 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28.rmf exists, delete to re-create
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28.arf exists, delete to re-create
[Thu Feb  2 08:43:39 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:39 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Feb  2 08:43:40 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:40 2012] Using photon index=1.80, rate=0.0174, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src28.arf
[Thu Feb  2 08:43:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:40 2012] Updating source flux to 2.9e-13