[Sat Jan 28 21:46:40 2012] Detection parameters:
  Position = (140.5, 267.8) = 0 43 37.13 41 14 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1365.9 +/- 44.9
  Background counts = 22.6
  Rate = 0.04 +/- 0.001

[Sat Jan 28 21:46:43 2012] Off-axis axis estimate = 11.66'
[Sat Jan 28 21:47:46 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:46 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Sat Jan 28 21:47:46 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.113
[Sat Jan 28 21:47:46 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.26"
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src26.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src26.csv
[Sat Jan 28 21:47:47 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Jan 28 21:47:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src26.csv
[Sat Jan 28 21:47:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:48 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Jan 28 21:47:48 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Jan 28 21:47:48 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sat Jan 28 21:48:46 2012] Warning, spatial fit 26 centroid is now closest to src. 37
[Sat Jan 28 21:48:46 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:46 2012] Assessing source extent using major
[Sat Jan 28 21:48:46 2012] Source does appear to be extended
[Sat Jan 28 21:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:37 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:37 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Sat Jan 28 21:49:37 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.113
[Sat Jan 28 21:49:37 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 12.26"
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src24.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src24.csv
[Sat Jan 28 21:49:38 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src24_1.ximg exists
[Sat Jan 28 21:49:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src24.csv
[Sat Jan 28 21:49:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:39 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sat Jan 28 21:49:39 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sat Jan 28 21:49:39 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Sat Jan 28 21:50:23 2012] Warning, spatial fit 24 centroid is now closest to src. 37
[Sat Jan 28 21:50:23 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:23 2012] Assessing source extent using major
[Sat Jan 28 21:50:23 2012] Source does appear to be extended
[Sat Jan 28 21:50:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 06:36:58 2012] Counts = 1365.883545, rescaling region sizes by 2.000000
[Sun Jan 29 06:36:58 2012] XMMSAS src. selection expression = ellipse(12178.107712, 23247.454529, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jan 29 06:36:58 2012] Writing source region out to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_src.reg
[Sun Jan 29 06:36:58 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (66, 193) - (216, 343)
[Sun Jan 29 06:36:58 2012] XMMSAS bgd. selection expression = annulus(12178.107712, 23247.454529, 4350.000000, 8700.000000, X, Y) && !ellipse(18196.892521, 23396.240208, 434.183917, 402.243937, 47.213372, X, Y) && !ellipse(20672.269160, 28740.784800, 428.768812, 428.768812, 0.000000, X, Y) && !ellipse(21058.842742, 18891.044254, 381.892372, 289.541906, 17.518617, X, Y) && !ellipse(20623.198400, 24869.165800, 389.583211, 389.583211, 0.000000, X, Y) && !ellipse(13246.494156, 18387.480484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17323.803800, 14379.814000, 668.761619, 392.609611, 33.648732, X, Y) && !ellipse(19898.756092, 24070.992240, 466.572719, 373.348470, 56.445885, X, Y) && !ellipse(19724.438800, 27283.804600, 357.457610, 357.457610, 0.000000, X, Y) && !ellipse(12828.377487, 21629.337631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16328.974000, 29887.197200, 560.040016, 452.328013, 311.708800, X, Y) && !ellipse(19856.278007, 31163.710619, 426.503329, 343.619008, 339.965733, X, Y) && !ellipse(8477.150864, 25874.932587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13983.501000, 14918.304600, 626.344018, 301.633609, 40.966552, X, Y) && !ellipse(14308.918732, 27783.872101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20969.681000, 24142.223297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18624.191800, 20929.452200, 333.389610, 333.389610, 0.000000, X, Y) && !ellipse(19870.289480, 17859.243600, 557.486416, 557.486416, 0.000000, X, Y) && !ellipse(19115.932000, 25320.130000, 1454.104042, 1454.104042, 0.000000, X, Y) && !ellipse(9139.005196, 31084.405396, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan 29 06:36:58 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14.gif
[Sun Jan 29 06:56:53 2012] Mean detx,y = (4015.11, 11511.15) 
[Sun Jan 29 06:56:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 06:58:41 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 06:58:41 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jan 29 06:58:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Jan 29 09:01:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan 29 09:01:23 2012] rmf not generated due to insufficient counts
[Sun Jan 29 17:27:48 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:48 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jan 29 17:27:50 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:50 2012] Using photon index=1.80, rate=0.0392, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14.arf
[Sun Jan 29 17:27:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:51 2012] Updating source flux to 5.8e-13
[Sun Jan 29 17:27:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb  2 08:42:58 2012] Counts = 1365.883545, rescaling region sizes by 2.000000
[Thu Feb  2 08:42:58 2012] XMMSAS src. selection expression = ellipse(12178.107712, 23247.454529, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Feb  2 08:42:58 2012] Not overwriting source region fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_src.reg
[Thu Feb  2 08:42:58 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (66, 193) - (216, 343)
[Thu Feb  2 08:42:58 2012] XMMSAS bgd. selection expression = annulus(12178.107712, 23247.454529, 4350.000000, 8700.000000, X, Y) && !ellipse(18196.892521, 23396.240208, 434.183917, 402.243937, 47.213372, X, Y) && !ellipse(20672.269160, 28740.784800, 428.768812, 428.768812, 0.000000, X, Y) && !ellipse(21058.842742, 18891.044254, 381.892372, 289.541906, 17.518617, X, Y) && !ellipse(20623.198400, 24869.165800, 389.583211, 389.583211, 0.000000, X, Y) && !ellipse(13246.494156, 18387.480484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17323.803800, 14379.814000, 668.761619, 392.609611, 33.648732, X, Y) && !ellipse(19898.756092, 24070.992240, 466.572719, 373.348470, 56.445885, X, Y) && !ellipse(19724.438800, 27283.804600, 357.457610, 357.457610, 0.000000, X, Y) && !ellipse(12828.377487, 21629.337631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16328.974000, 29887.197200, 560.040016, 452.328013, 311.708800, X, Y) && !ellipse(19856.278007, 31163.710619, 426.503329, 343.619008, 339.965733, X, Y) && !ellipse(8477.150864, 25874.932587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13983.501000, 14918.304600, 626.344018, 301.633609, 40.966552, X, Y) && !ellipse(14308.918732, 27783.872101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20969.681000, 24142.223297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18624.191800, 20929.452200, 333.389610, 333.389610, 0.000000, X, Y) && !ellipse(19870.289480, 17859.243600, 557.486416, 557.486416, 0.000000, X, Y) && !ellipse(19115.932000, 25320.130000, 1454.104042, 1454.104042, 0.000000, X, Y) && !ellipse(9139.005196, 31084.405396, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 08:42:58 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14.gif
[Thu Feb  2 08:43:01 2012] ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:01 2012] Mean detx,y = (4015.11, 11511.15) 
[Thu Feb  2 08:43:01 2012] ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_src.img and ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:01 2012] ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:01 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Feb  2 08:43:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Feb  2 08:43:01 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb  2 08:43:12 2012] rmf not generated due to insufficient counts
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14.arf exists, delete to re-create
[Thu Feb  2 08:43:39 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:39 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Feb  2 08:43:40 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:40 2012] Using photon index=1.80, rate=0.0392, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src14.arf
[Thu Feb  2 08:43:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:40 2012] Updating source flux to 5.8e-13
[Thu Feb  2 08:43:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting