[Sat Jan 28 21:46:42 2012] Detection parameters:
  Position = (333.7, 170.9) = 0 42 22.65 41 7 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.0 +/- 12.0
  Background counts = 23.5
  Rate = 0.002 +/- 0.0003

[Sat Jan 28 21:46:43 2012] Off-axis axis estimate = 9.59'
[Sat Jan 28 21:47:46 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:47:46 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Sat Jan 28 21:47:46 2012] source mask rpix=2.6, npix_max = 37, mask sum = 31, frac = 0.817
[Sat Jan 28 21:47:46 2012] Giving source the simple spatial ID 88 for pass 0, mean size = 11.22"
[Sat Jan 28 21:47:48 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src88.ximg exists
[Sat Jan 28 21:47:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src88.csv
[Sat Jan 28 21:47:48 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src88_1.ximg exists
[Sat Jan 28 21:47:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src88.csv
[Sat Jan 28 21:47:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Sat Jan 28 21:47:49 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Sat Jan 28 21:47:49 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Sat Jan 28 21:48:46 2012] Warning: source 88 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 101 at 14.219516 pixels away
[Sat Jan 28 21:48:46 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:48:46 2012] Assessing source extent using major
[Sat Jan 28 21:48:46 2012] Source does appear to be extended
[Sat Jan 28 21:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 21:49:37 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 21:49:37 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Sat Jan 28 21:49:37 2012] source mask rpix=2.6, npix_max = 37, mask sum = 31, frac = 0.817
[Sat Jan 28 21:49:37 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 11.22"
[Sat Jan 28 21:49:39 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src79.ximg exists
[Sat Jan 28 21:49:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src79.csv
[Sat Jan 28 21:49:39 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src79_1.ximg exists
[Sat Jan 28 21:49:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src79.csv
[Sat Jan 28 21:49:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Sat Jan 28 21:49:40 2012] fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Sat Jan 28 21:49:40 2012] Fit fullrun_mos1_xmm0112570401_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Sat Jan 28 21:50:23 2012] Source 101 is offset by -9.597913 and 1.803599 pixels which is larger than
2 X fitted extent = 1.292703 x 1.292703, not incorporating fit results
[Sat Jan 28 21:50:23 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 21:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 21:50:23 2012] Assessing source extent using major
[Sat Jan 28 21:50:23 2012] Source does appear to be extended
[Sat Jan 28 21:50:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 06:37:00 2012] XMMSAS src. selection expression = ellipse(28984.659546, 14822.169083, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan 29 06:37:00 2012] Writing source region out to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_src.reg
[Sun Jan 29 06:37:00 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (296, 133) - (371, 208)
[Sun Jan 29 06:37:00 2012] XMMSAS bgd. selection expression = annulus(28984.659546, 14822.169083, 1087.500000, 2175.000000, X, Y)
[Sun Jan 29 06:37:00 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101.gif
[Sun Jan 29 07:10:18 2012] Mean detx,y = (8843.67, -6569.66) 
[Sun Jan 29 07:10:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan 29 07:10:43 2012] Binned source spectrum to 10 counts/bin
[Sun Jan 29 07:10:43 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Sun Jan 29 07:10:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_bgd.pi.gz
[Sun Jan 29 11:00:44 2012] Not generating rmf since there are only 76 counts
[Sun Jan 29 11:00:44 2012] rmf not generated due to insufficient counts
[Sun Jan 29 17:27:50 2012] Updating aperture counts using extracted products
[Sun Jan 29 17:27:50 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Sun Jan 29 17:27:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 17:27:51 2012] Using photon index=1.80, rate=0.00221, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101.arf
[Sun Jan 29 17:27:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan 29 17:27:51 2012] Updating source flux to 4.5e-14
[Sun Jan 29 17:27:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb  2 08:43:00 2012] XMMSAS src. selection expression = ellipse(28984.659546, 14822.169083, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb  2 08:43:00 2012] Not overwriting source region fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_src.reg
[Thu Feb  2 08:43:00 2012] Extracting stamp from image fullrun_mos1_xmm0112570401_pi300-10000_cl_sm2.00.img.gz, (296, 133) - (371, 208)
[Thu Feb  2 08:43:00 2012] XMMSAS bgd. selection expression = annulus(28984.659546, 14822.169083, 1087.500000, 2175.000000, X, Y)
[Thu Feb  2 08:43:00 2012] Writing fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101.gif
[Thu Feb  2 08:43:03 2012] ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_src.evt and ../../xmm0112570401/products/events/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_bgd.evt exist, delete to re-create
[Thu Feb  2 08:43:03 2012] Mean detx,y = (8843.67, -6569.66) 
[Thu Feb  2 08:43:03 2012] ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_src.img and ../../xmm0112570401/products/images/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_bgd.img exist, delete to re-create
[Thu Feb  2 08:43:03 2012] ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_src_b10.pi.gz and ../../xmm0112570401/products/spectra/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_bgd.pi exist, delete to re-create
[Thu Feb  2 08:43:03 2012] Setting source spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Thu Feb  2 08:43:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_bgd.pi.gz
[Thu Feb  2 08:43:03 2012] ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_src.lc and ../../xmm0112570401/products/lightcurves/fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_bgd.lc exist, delete to re-create
[Thu Feb  2 08:43:12 2012] Not generating rmf since there are only 76 counts
[Thu Feb  2 08:43:12 2012] rmf not generated due to insufficient counts
[Thu Feb  2 08:43:12 2012] fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101.arf exists, delete to re-create
[Thu Feb  2 08:43:39 2012] Updating aperture counts using extracted products
[Thu Feb  2 08:43:39 2012] Error reading totcts from fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Thu Feb  2 08:43:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 08:43:42 2012] Using photon index=1.80, rate=0.00221, arf fullrun_mos1_xmm0112570401_pi300-10000_pass1_cl_src101.arf
[Thu Feb  2 08:43:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 08:43:42 2012] Updating source flux to 4.5e-14
[Thu Feb  2 08:43:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting