[Tue Aug 14 16:21:43 2012] Detection parameters:
  Position = (299.1, 511.7) = 0 40 13.74 40 50 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26173.7 +/- 186.8
  Background counts = 114.6
  Rate = 0.4 +/- 0.003

[Tue Aug 14 16:21:44 2012] Off-axis axis estimate = 15.46'
[Tue Aug 14 16:26:54 2012] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 16:26:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 16:26:54 2012] Initial guess for spatial extent in simple fitting = 14.16"
[Tue Aug 14 16:26:54 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.993
[Tue Aug 14 16:26:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 14.16"
[Tue Aug 14 17:23:19 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src3.ximg exists
[Tue Aug 14 17:23:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src3.csv
[Tue Aug 14 17:23:19 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Aug 14 17:23:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src3.csv
[Tue Aug 14 17:23:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 17:23:19 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Aug 14 17:23:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Aug 14 17:23:19 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Aug 14 17:23:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Aug 14 17:23:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:34:25 2012] Warning, spatial fit 3 centroid is now closest to src. 10
[Tue Aug 14 18:34:25 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.151987 pixels away
[Tue Aug 14 18:34:25 2012] Spatial fit model total counts = 1900.760000, observed total counts = 1719.000000
[Tue Aug 14 18:34:25 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 18:34:25 2012] Spatial fit model total counts = 4164.210000, observed total counts = 4042.000000
[Tue Aug 14 18:34:25 2012] Offset between fit and detection position for source 5 = 3.300878 pixels
[Tue Aug 14 18:34:25 2012] Warning, changing simple spatial fit ID from 3 to 21
[Tue Aug 14 18:34:25 2012] 4051.400000 total counts/ 1660.250000 bgd. counts: snr = 58.684050
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.300878 pixels
  Position = (301.7, 509.6) = 0 40 12.75 40 49 57.0
  Extent = 9.5 (9.3-9.8)", rotation angle = 0
  Source counts = 2391.2 +/- 63.7
  Background counts = 1660.2
  Rate = 0.06 +/- 0.002
[Tue Aug 14 18:34:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:34:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:34:25 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 18:34:25 2012] Source does appear to be extended
[Tue Aug 14 18:34:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:34:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:34:44 2012] Initial guess for spatial extent in simple fitting = 9.52"
[Tue Aug 14 18:34:44 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.865
[Tue Aug 14 18:34:44 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.52"
[Tue Aug 14 19:34:45 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Aug 14 19:34:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src3.csv
[Tue Aug 14 19:34:45 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Aug 14 19:34:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src3.csv
[Tue Aug 14 19:34:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 19:34:46 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Aug 14 19:34:46 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Aug 14 19:34:46 2012] Fit fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Aug 14 20:29:24 2012] Warning, spatial fit 3 centroid is now closest to src. 23
[Tue Aug 14 20:29:24 2012] Source 5 is offset by -3.106414 and 1.925103 pixels which is larger than
2 X fitted extent = 1.684074 x 1.684074, not incorporating fit results
[Tue Aug 14 20:29:24 2012] Spatial fit model total counts = 4162.430000, observed total counts = 4042.000000
[Tue Aug 14 20:29:24 2012] Offset between fit and detection position for source 5 = 0.004161 pixels
[Tue Aug 14 20:29:24 2012] Warning, changing simple spatial fit ID from 3 to 21
[Tue Aug 14 20:29:24 2012] 4067.310000 total counts/ 1674.950000 bgd. counts: snr = 58.455531
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.004161 pixels
  Position = (301.7, 509.6) = 0 40 12.75 40 49 57.0
  Extent = 9.5 (9.2-9.8)", rotation angle = 0
  Source counts = 2392.4 +/- 63.8
  Background counts = 1675.0
  Rate = 0.06 +/- 0.002
[Tue Aug 14 20:29:24 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 20:29:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 20:29:24 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 20:29:24 2012] Source does appear to be extended
[Tue Aug 14 20:29:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 20:29:37 2012] Counts = 2392.360000, rescaling region sizes by 2.000000
[Tue Aug 14 20:29:37 2012] XMMSAS src. selection expression = ellipse(26200.922000, 44286.742000, 1145.737233, 1145.737233, 0.000000, X, Y)
[Tue Aug 14 20:29:37 2012] Writing source region out to fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src5_src.reg
[Tue Aug 14 20:29:37 2012] Extracting stamp from image fullrun_pn_xmm0112570301_pi300-10000_cl_sm2.00.img.gz, (236, 444) - (368, 575)
[Tue Aug 14 20:29:37 2012] XMMSAS bgd. selection expression = annulus(26200.922000, 44286.742000, 3819.124110, 7638.248220, X, Y) && !ellipse(24790.002655, 36920.064209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24265.145844, 37119.918884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24812.570404, 44319.150299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23611.918365, 44151.968414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33963.195251, 41844.763885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27164.236053, 41018.120514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27566.385376, 45193.645264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26791.337189, 45440.005432, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 20:29:37 2012] Writing fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src5.gif
[Tue Aug 14 20:36:17 2012] Mean detx,y = (-10047.66, -14694.61) 
[Tue Aug 14 20:36:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 20:38:08 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 20:38:08 2012] Setting source spectrum file to fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Aug 14 20:38:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Aug 14 22:17:44 2012] Updating aperture counts using extracted products
[Tue Aug 14 22:17:44 2012] Error reading totcts from fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Aug 14 22:17:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 22:17:45 2012] Using photon index=1.80, rate=0.0594, arf fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src5.arf
[Tue Aug 14 22:17:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 22:17:45 2012] Updating source flux to 4.7e-13
[Tue Aug 14 22:18:45 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Tue Aug 14 22:18:45 2012] Flag p found in src. 5 procflags, skipping spectral fitting