[Tue Aug 14 16:21:43 2012] Detection parameters:
  Position = (279.5, 427.2) = 0 40 21.27 40 43 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1314.5 +/- 51.6
  Background counts = 160.6
  Rate = 0.02 +/- 0.0009

[Tue Aug 14 16:21:44 2012] Off-axis axis estimate = 9.44'
[Tue Aug 14 16:26:54 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 16:26:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 16:26:54 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Tue Aug 14 16:26:54 2012] source mask rpix=2.6, npix_max = 37, mask sum = 19, frac = 0.506
[Tue Aug 14 16:26:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.15"
[Tue Aug 14 17:23:18 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 14 17:23:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 17:23:19 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 14 17:23:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 17:23:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 17:23:19 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 14 17:23:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 14 17:23:19 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 14 17:23:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 14 17:23:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 18:34:25 2012] Warning, spatial fit 1 centroid is now closest to src. 1
[Tue Aug 14 18:34:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 18:34:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 18:34:25 2012] Assessing source extent using major
[Tue Aug 14 18:34:25 2012] Source does appear to be extended
[Tue Aug 14 18:34:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 18:34:25 2012] Source is confused with source 1
[Tue Aug 14 18:34:44 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:34:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 18:34:44 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Tue Aug 14 18:34:44 2012] source mask rpix=2.6, npix_max = 37, mask sum = 19, frac = 0.506
[Tue Aug 14 18:34:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.15"
[Tue Aug 14 19:34:45 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 14 19:34:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 19:34:45 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 14 19:34:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 19:34:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 19:34:46 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 14 19:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 14 19:34:46 2012] fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 14 19:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 14 19:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112570301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 20:29:24 2012] Spatial fit model total counts = 995.372000, observed total counts = 2639.000000
[Tue Aug 14 20:29:24 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 20:29:24 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 20:29:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 20:29:24 2012] Assessing source extent using major
[Tue Aug 14 20:29:24 2012] Source does appear to be extended
[Tue Aug 14 20:29:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 20:29:37 2012] Counts = 1314.477661, rescaling region sizes by 2.000000
[Tue Aug 14 20:29:37 2012] XMMSAS src. selection expression = ellipse(24265.145844, 37119.918884, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Aug 14 20:29:37 2012] Writing source region out to fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 14 20:29:37 2012] Extracting stamp from image fullrun_pn_xmm0112570301_pi300-10000_cl_sm2.00.img.gz, (204, 352) - (354, 502)
[Tue Aug 14 20:29:37 2012] XMMSAS bgd. selection expression = annulus(24265.145844, 37119.918884, 4350.000000, 8700.000000, X, Y) && !ellipse(24790.002655, 36920.064209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23925.551666, 27620.731171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26200.922000, 44286.742000, 763.824822, 763.824822, 0.000000, X, Y) && !ellipse(29918.972321, 33553.139252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24812.570404, 44319.150299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23611.918365, 44151.968414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27164.236053, 41018.120514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27566.385376, 45193.645264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32853.533440, 32004.640000, 322.212009, 322.212009, 0.000000, X, Y) && !ellipse(22346.040800, 28870.850200, 350.097610, 350.097610, 0.000000, X, Y) && !ellipse(26791.337189, 45440.005432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27455.147614, 34366.759705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24307.231720, 31551.465400, 412.772812, 412.772812, 0.000000, X, Y)
[Tue Aug 14 20:29:37 2012] Writing fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src2.gif
[Tue Aug 14 20:30:48 2012] Mean detx,y = (-7956.29, -7452.49) 
[Tue Aug 14 20:30:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 20:34:30 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 20:34:30 2012] Setting source spectrum file to fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 14 20:34:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 14 21:01:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 14 21:01:33 2012] rmf not generated due to insufficient counts
[Tue Aug 14 22:17:44 2012] Updating aperture counts using extracted products
[Tue Aug 14 22:17:44 2012] Error reading totcts from fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 14 22:17:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 22:17:45 2012] Using photon index=1.80, rate=0.0221, arf fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src2.arf
[Tue Aug 14 22:17:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 22:17:45 2012] Updating source flux to 1.3e-13
[Tue Aug 14 22:18:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 14 22:19:35 2012] xmm0112570301/analysis//spectral/fullrun_pn_xmm0112570301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete