[Thu Jul 26 03:37:55 2012] Detection parameters:
  Position = (498.6, 234.2) = 0 40 16.02 40 49 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.8 +/- 15.0
  Background counts = 33.1
  Rate = 0.002 +/- 0.0002

[Thu Jul 26 03:37:56 2012] Off-axis axis estimate = 15.24'
[Thu Jul 26 05:42:03 2012] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 05:42:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 26 05:42:03 2012] Initial guess for spatial extent in simple fitting = 14.05"
[Thu Jul 26 05:42:03 2012] source mask rpix=3.2, npix_max = 55, mask sum = 38, frac = 0.683
[Thu Jul 26 05:42:03 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 14.05"
[Thu Jul 26 06:39:15 2012] fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_src26.ximg exists
[Thu Jul 26 06:39:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_src26.csv
[Thu Jul 26 06:39:15 2012] fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Jul 26 06:39:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_src26.csv
[Thu Jul 26 06:39:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 06:39:16 2012] fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Jul 26 06:39:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jul 26 06:39:16 2012] fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Jul 26 06:39:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jul 26 06:39:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 06:39:38 2012] Warning, spatial fit 26 centroid is now closest to src. 37
[Thu Jul 26 06:39:38 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 06:39:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 06:39:38 2012] Assessing source extent using major
[Thu Jul 26 06:39:38 2012] Source does appear to be extended
[Thu Jul 26 06:39:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:26:27 2012] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 08:26:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 26 08:26:27 2012] Initial guess for spatial extent in simple fitting = 14.05"
[Thu Jul 26 08:26:27 2012] source mask rpix=3.2, npix_max = 55, mask sum = 38, frac = 0.683
[Thu Jul 26 08:26:27 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 14.05"
[Thu Jul 26 09:18:41 2012] fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_src24.ximg exists
[Thu Jul 26 09:18:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_src24.csv
[Thu Jul 26 09:18:41 2012] fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Jul 26 09:18:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_src24.csv
[Thu Jul 26 09:18:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 09:18:42 2012] fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Jul 26 09:18:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Jul 26 09:18:42 2012] fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Jul 26 09:18:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Jul 26 09:18:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112570201_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 09:19:05 2012] Warning, spatial fit 24 centroid is now closest to src. 37
[Thu Jul 26 09:19:05 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 09:19:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 09:19:05 2012] Assessing source extent using major
[Thu Jul 26 09:19:05 2012] Source does appear to be extended
[Thu Jul 26 09:19:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 12:15:31 2012] XMMSAS src. selection expression = ellipse(43331.182037, 20323.104370, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 12:15:31 2012] Writing source region out to fullrun_mos2_xmm0112570201_pi300-10000_pass1_cl_src15_src.reg
[Thu Jul 26 12:15:31 2012] Extracting stamp from image fullrun_mos2_xmm0112570201_pi300-10000_cl_sm2.00.img.gz, (461, 197) - (536, 272)
[Thu Jul 26 12:15:31 2012] XMMSAS bgd. selection expression = annulus(43331.182037, 20323.104370, 1087.500000, 2175.000000, X, Y) && !ellipse(43571.451569, 20945.429962, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 12:15:31 2012] Writing fullrun_mos2_xmm0112570201_pi300-10000_pass1_cl_src15.gif
[Thu Jul 26 12:30:04 2012] Mean detx,y = (-16851.22, 371.77) 
[Thu Jul 26 12:30:05 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 12:30:20 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 12:30:20 2012] Setting source spectrum file to fullrun_mos2_xmm0112570201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jul 26 12:30:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112570201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Jul 26 12:57:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 12:57:05 2012] rmf not generated due to insufficient counts
[Thu Jul 26 13:00:54 2012] Updating aperture counts using extracted products
[Thu Jul 26 13:00:54 2012] Error reading totcts from fullrun_mos2_xmm0112570201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jul 26 13:00:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 13:00:54 2012] Using photon index=1.80, rate=0.00186, arf fullrun_mos2_xmm0112570201_pi300-10000_pass1_cl_src15.arf
[Thu Jul 26 13:00:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 13:00:54 2012] Updating source flux to 6.9e-14
[Thu Jul 26 13:02:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting